Connect the modem to your wall outlet and cable line first

Start by placing your Comcast modem in a central location in your home — ideally near where you want your router, or in a spot that gets good airflow. Avoid enclosed spaces like cabinets or closets, which trap heat and slow the connection.

Plug the power cable into the back of the modem, then into a wall outlet or power strip. The modem will take 30 to 60 seconds to power on. You will see lights on the front of the unit begin to turn on in sequence.

Take the coaxial cable (the thick cable with a threaded connector) that comes from your wall jack and screw it firmly into the port labeled Cable In on the back of the modem. Turn it by hand until it is snug — do not use pliers or force it. This is the connection that brings your internet signal into the modem.

Wait for the modem to finish its startup sequence

After you plug in power and connect the cable line, the modem needs two to five minutes to boot up and connect to Comcast's network. During this time, you will see the lights on the front change. The Power light should be solid, the Online or Internet light should be solid or blinking, and the Downstream and Upstream lights should turn on.

Do not unplug the modem or move it during this process. If the Online light does not turn solid after five minutes, check that the coaxial cable is screwed in tightly at both the wall jack and the modem. A loose connection is the most common reason the modem will not sync.

Once the Online light is solid, your modem is connected to Comcast's network and ready to send internet to your devices.

Key Takeaways

  • Place the modem in a central, well-ventilated location away from enclosed spaces.
  • Connect the coaxial cable from your wall jack to the Cable In port on the back of the modem and screw it in firmly by hand.
  • Plug in the power cable and wait two to five minutes for the modem to boot up and connect to Comcast's network.
  • The Online light turning solid means your modem is ready; if it does not light up after five minutes, check that both cable connections are tight.

Connect your router to the modem if you want wireless internet

If you have a separate router (a device that broadcasts Wi-Fi), connect it to the modem using an ethernet cable. Plug one end of the ethernet cable into the port labeled Ethernet or LAN on the back of the modem, and the other end into the port labeled WAN, Internet, or Uplink on the back of your router.

Power on your router and wait another two to three minutes for it to boot up. Once the router's lights stabilize, you should see your Wi-Fi network name appear on your phone or computer. If Comcast provided you with a combined modem-router unit (sometimes called a gateway), you do not need a separate router — the Wi-Fi is already built in.

Check your connection speed and signal strength

To see whether your modem is working at full strength, log into your modem's settings page. Open a web browser on any device connected to your network and type 192.168.0.1 or 192.168.100.1 into the address bar. You may be asked to log in; the default username is often admin and the password is printed on the back or bottom of the modem.

Look for a page that shows your Downstream Power Level and Upstream Power Level. These numbers tell you how strong your signal is. Downstream should be between -7 and +7 dBmV, and Upstream should be between 37 and 55 dBmV. If your numbers are outside these ranges, the signal from your wall jack may be weak, or the coaxial cable may need to be replaced.

You can also run a speed test by visiting speedtest.net or fast.com on any device. Compare the results to the speed tier you pay Comcast for. If you are getting significantly less speed than you should, restart the modem by unplugging it for 30 seconds, plugging it back in, and waiting for the Online light to turn solid again.

Troubleshoot if the modem will not connect

If the Online light stays off or blinks after five minutes, first check that the coaxial cable is screwed in tightly at both ends. A loose connection is the most common cause. Unscrew it slightly and screw it back in firmly.

If the cable is tight and the light still will not turn on, restart the modem by unplugging it for 30 seconds. Plug it back in and wait five minutes. If the Online light still does not turn solid, the issue may be with the signal coming from your wall jack. Contact Comcast to report that your modem will not sync; they can check the signal strength on their end and may send a technician if the line is damaged.

If the Online light is solid but you have no internet on your devices, restart your router (if you have one) by unplugging it for 30 seconds. If you are using Wi-Fi, make sure you are connected to the correct network name and that you entered the password correctly. The network name and password are usually printed on a sticker on the modem or router.

Frequently Asked Questions

Do I need to call Comcast to set up the modem?

Most modern Comcast modems set up automatically when you connect them to the cable line and power. If the Online light does not turn solid after five minutes, call Comcast at the number on your bill. They can check whether the modem is registered to your account and set up it if needed.

Can I use any modem with Comcast, or does it have to be theirs?

Comcast supports many third-party modems, but not all. Before you buy a modem, check Comcast's list of approved devices on their website or call them to confirm your model will work. Using an approved modem can save you the monthly rental fee Comcast charges for their equipment.

What do the lights on the front of the modem mean?

The Power light shows the modem is on. The Online or Internet light shows the modem is connected to Comcast's network. The Downstream and Upstream lights show data is flowing. If any of these lights are off or red after five minutes, there is a connection problem. Restart the modem and check your cable connections.

How far can my router be from the modem?

You can place your router up to 150 feet away from the modem using an ethernet cable, though most homes do not need that distance. Keep the router in a central location and away from metal objects, microwaves, and cordless phones, which can interfere with the Wi-Fi signal.

What should I do if my internet keeps dropping?

Restart the modem by unplugging it for 30 seconds and plugging it back in. If the problem continues, check that the coaxial cable is tight and that your modem is not overheating. If it is hot to the touch, move it to a location with better airflow. If drops continue after that, contact Comcast — the issue may be with the signal quality on their line.