You can connect Eero to your modem wirelessly, but it requires the modem to broadcast its own network first

Eero routers are designed to work best with an Ethernet cable running directly from your modem, but you can set up your Eero system without one. The process involves connecting your Eero to your modem's built-in WiFi signal during the initial setup, then letting Eero create its own network. This method works, though your speeds will be slower than a wired connection because the Eero is receiving and transmitting on the same radio at once.

The key step is making sure your modem is powered on and broadcasting a WiFi network before you start. Most modern modems include WiFi capability built in—check your modem's manual or the sticker on the back to see if yours does. If your modem has no WiFi option, you will need an Ethernet cable or a different setup approach.

Key Takeaways

  • Your modem must have WiFi capability and be powered on and broadcasting before you begin the Eero setup process.
  • During Eero setup, you will connect your phone or tablet to your modem's WiFi network, then use the Eero app to link the Eero to that same network.
  • Wireless setup is slower than Ethernet because the Eero uses one radio to both receive the modem's signal and broadcast to your devices.
  • After initial setup, you can disable your modem's WiFi to avoid confusion and let Eero handle all wireless traffic in your home.

Check that your modem has WiFi and is powered on

Before you start, confirm your modem broadcasts a WiFi signal. Look for a WiFi button or indicator light on the front or back of the modem. If you see a WiFi light that is on or blinking, your modem is broadcasting. You can also check your modem's manual—the model number is usually printed on a sticker on the device itself.

Power on your modem and wait two to three minutes for it to fully boot up. You should see lights on the front panel indicating it is connected to your internet service. If your modem has a WiFi light, it should be lit or blinking. If you do not see any WiFi indicator, your modem may not have built-in WiFi, and you will need to use an Ethernet cable instead.

Connect your phone or tablet to your modem's WiFi network

Open the WiFi settings on your phone or tablet and look for your modem's network name. The network name is usually printed on a sticker on the modem itself—it often looks like "Modem-1234" or includes your internet provider's name. Select that network and enter the password, which is also on the sticker.

Wait for your device to connect fully. You should see a checkmark or "Connected" label next to the network name. This connection is temporary and only for the setup process. Once Eero is running, you will connect your devices to the Eero network instead.

Open the Eero app and start the setup process

read the Eero app from the Apple App Store or Google Play Store if you have not already. Open the app and tap the button to set up a new Eero system. The app will ask you to create or sign into an Eero account—you will need an email address and password.

The app will then search for your Eero device. Make sure your Eero is powered on and within a few feet of your phone. The app should find it within 30 seconds. If it does not, power off the Eero, wait 10 seconds, and power it back on, then try again.

Let Eero connect to your modem's WiFi network

Once the app finds your Eero, it will ask which WiFi network you want to connect to. Select your modem's network from the list—the same one you just connected your phone to. Enter the modem's WiFi password when prompted.

The Eero will now connect to your modem wirelessly. This step takes one to two minutes. You will see a progress bar in the app. Do not close the app or move away from the Eero during this time. Once the connection is complete, the app will show a confirmation message.

Create your Eero network name and password

After Eero connects to your modem, the app will ask you to name your new Eero network and set a password. Choose a name that is straightforward to remember—this is what you will see when you look for WiFi networks on your devices. The password should be at least 8 characters long and something you can type easily.

Write down your Eero network name and password somewhere safe. You will need them to connect your phones, computers, tablets, and other devices to your Eero network. Once you finish this step, your Eero system is live and ready to use.

Disable your modem's WiFi to avoid interference

Now that Eero is running, you should turn off your modem's built-in WiFi. Having two networks broadcasting in the same space can confuse your devices and slow down your connection. Most modems have a WiFi button on the front panel—press and hold it for three to five seconds until the WiFi light turns off.

If your modem does not have a physical WiFi button, you may need to log into the modem's settings page through a web browser. Open a browser and type your modem's IP address (usually 192.168.0.1 or 192.168.100.1) into the address bar. Log in with the username and password printed on the modem, then look for a WiFi or wireless settings option and turn it off.

Troubleshoot if Eero cannot connect to your modem's WiFi

If the Eero app shows an error while trying to connect, the most common cause is that your phone lost connection to the modem's WiFi. Check your phone's WiFi settings and make sure you are still connected to the modem's network. If you have disconnected, reconnect and try the Eero setup again from the beginning.

Another common issue is that the modem's WiFi password is incorrect. Double-check the password on the modem's sticker—some passwords include capital letters, numbers, or special characters that are straightforward to mistype. If you are still stuck, restart both your modem and Eero by unplugging them for 30 seconds, plugging them back in, and waiting for all lights to stabilize before trying again.

Frequently Asked Questions

Will my internet speed be slower if I connect Eero wirelessly instead of with an Ethernet cable?

Yes, wireless setup is noticeably slower because the Eero uses one radio to receive your modem's signal and broadcast to your devices at the same time. With an Ethernet cable, the Eero can use its full bandwidth for your devices. If you have high-speed internet (above 300 Mbps), wireless setup may not deliver the full speed you are paying for.

Can I switch to an Ethernet cable later if I set up wirelessly now?

Yes. Once your Eero is set up and running, you can plug an Ethernet cable from your modem to the Eero at any time. The Eero will automatically use the wired connection and improve your speeds. You do not need to redo the setup process.

What if my modem does not have WiFi?

If your modem has no built-in WiFi, you cannot use the wireless setup method. You will need an Ethernet cable to connect the Eero to your modem. Ethernet cables are inexpensive and available at any electronics store or online retailer.

Do I need to keep my modem's WiFi on after Eero is set up?

No. Once Eero is running, you should turn off your modem's WiFi to avoid having two networks compete for the same airspace. This reduces interference and makes your connection more stable. All your devices will connect to the Eero network instead.

How long does the wireless setup process take?

The entire process usually takes five to ten minutes, depending on how quickly your Eero connects to your modem's WiFi. The longest part is waiting for the Eero to establish the wireless link, which typically takes one to two minutes.