Connect the modem to the router with an ethernet cable
The physical connection is straightforward: take an ethernet cable, plug one end into the ethernet port on the back of your modem, and plug the other end into the WAN port (or Internet port) on the back of your router. The WAN port is usually a different color — often blue or yellow — and is separate from the regular ethernet ports. If your router has multiple ports that look identical, check the label on the back or in the manual to find which one is the WAN port.
Make sure both devices are powered off before you plug in the cable. Once the cable is seated firmly in both ports, you can turn the modem on first, wait 30 seconds for it to fully boot, then turn on the router.
Key Takeaways
- Connect the modem's ethernet port to the router's WAN port using an ethernet cable before powering either device on.
- The WAN port on your router is usually labeled and often a different color from the standard ethernet ports.
- Power on the modem first and wait for it to stabilize before turning on the router.
- Once both devices are on and the lights show a stable connection, your router will broadcast a wireless network you can join.
- If you see no internet on the router, restart both devices in order: modem first, then router, waiting 30 seconds between each.
Wait for both devices to fully boot and show stable lights
After you power on the modem, watch its lights. You should see activity lights blink for about 30 to 60 seconds as it connects to your internet service provider. When the activity stops and the lights settle into a steady pattern — usually a solid light on Power, Internet, and Ethernet — the modem is ready.
Then turn on the router. It will take another 30 to 90 seconds to boot. You will see lights blink on the front as it initializes. Once the lights stop blinking and show a steady pattern, the router is ready to broadcast your wireless network. Do not unplug either device during this startup period, as it can interrupt the connection process.
Check that the ethernet cable is plugged into the correct ports
A common mistake is plugging the cable into a regular ethernet port on the router instead of the WAN port. If your router has four identical-looking ports plus one that is labeled differently, the labeled one is the WAN port. If all ports look the same, the manual or the back panel will tell you which is which — usually port 1 is WAN and ports 2, 3, 4 are for devices.
If you are not sure, unplug the cable from the router, check the label on the back panel or in the manual, and plug it into the correct port. Then restart both devices again: modem first, then router, waiting 30 seconds between each.
Look for the wireless network name on the router or in the manual
Once both devices are booted and showing stable lights, your router will broadcast a wireless network. The network name (also called SSID) is usually printed on a sticker on the bottom or back of the router. It often looks like "TP-Link-1234" or "Netgear-5678" — a brand name followed by numbers.
If you cannot find the sticker, check the manual or the router's web interface. To access the web interface, open a browser on any device connected to the router's network, type the router's IP address (usually 192.168.1.1 or 192.168.0.1) into the address bar, and log in with the default username and password (also on the sticker or in the manual). The wireless network name will be listed under Wi-Fi or Wireless settings.
Connect a device to the wireless network to test the connection
On your phone, tablet, or computer, look for available Wi-Fi networks. You should see your router's network name in the list. Select it, enter the wireless password (also on the sticker on the router), and wait a few seconds for the connection to establish.
Once connected, open a web browser and try to load a website — Google.com is a good test. If the page loads, your modem and router are connected and working. If the page does not load, restart both devices again and check that the ethernet cable is fully seated in both the modem and the WAN port on the router.
Restart both devices if the connection does not work
If you have checked the cable and the ports and still have no internet, a restart often fixes the problem. Unplug the modem's power cable, wait 30 seconds, and plug it back in. Wait another 30 seconds for it to fully boot. Then unplug the router's power cable, wait 30 seconds, and plug it back in. Wait for the router to boot — this usually takes 60 to 90 seconds.
After the restart, check the lights on both devices. The modem should show a steady internet light, and the router should show a steady power light and internet light. If the lights are still blinking or off, the modem may not be connecting to your internet service provider. Contact your internet provider to check if there is an outage or a problem with your account.
Change the default wireless password for security
Once your connection is working, log into the router's web interface (the IP address and login are on the sticker). Look for Wi-Fi settings or Wireless settings, and change the default password to something only you know. Use a password that is at least 12 characters long and includes uppercase letters, lowercase letters, numbers, and symbols.
After you change the password, you will need to reconnect all your devices to the wireless network using the new password. This step is important because the default password is printed on thousands of routers and is straightforward for others to guess.
Frequently Asked Questions
What if my router does not have a WAN port?
Some older or very basic routers may not have a clearly labeled WAN port. In that case, check the manual — it will tell you which port to use for the modem connection. If you cannot find the manual, search the router model number online plus "WAN port" to find the correct port.
Can I use a wireless connection between the modem and router instead of ethernet?
No. Modems do not broadcast wireless networks — they only have ethernet ports. You must use a physical ethernet cable to connect the modem to the router. Wireless connections come only from the router, not the modem.
Why are the lights on my modem blinking after I turn it on?
Blinking lights mean the modem is still connecting to your internet service provider. This is normal and usually takes 30 to 60 seconds. Once the lights stop blinking and show a steady pattern, the connection is stable. If the lights keep blinking for more than two minutes, the modem may not be connecting to your provider's network.
Do I need to restart my devices if I move the router to a different room?
No. Once the modem and router are connected and working, you can move the router to a different room without restarting. The ethernet cable will stay plugged into both devices. Your wireless devices may lose signal if you move the router too far away, but the modem-to-router connection will remain active.
What should I do if the internet light on my modem is off?
An off internet light means the modem is not connected to your internet service provider. First, check that the cable from the wall outlet is plugged firmly into the modem's port labeled "Internet" or "WAN" — not the ethernet port. If the cable is correct and the light is still off, restart the modem and wait two minutes. If the light is still off, contact your internet provider to check for an outage.