You Cannot Connect a Router to a Modem Wirelessly
A router and modem must be connected with an Ethernet cable—there is no wireless option between them. The modem receives the internet signal from your internet service provider (ISP) and converts it into data your devices can use. The router then takes that data from the modem and broadcasts it wirelessly to your phones, laptops, and other devices. This wired connection between modem and router is essential and cannot be replaced by Wi-Fi.
If you have read that wireless connection is possible, you may have encountered confusion about what "wireless" means in this context. Some modems and routers are sold as a single unit (called a gateway), which can feel like a wireless setup. Others use a separate modem and router, but the two devices must still be physically connected by cable. The wireless part—the part you experience—happens after the modem and router are wired together.
Key Takeaways
- Modems and routers must be connected with an Ethernet cable; wireless connection between them is not possible.
- The Ethernet cable runs from the port labeled "LAN" or "Ethernet" on your modem to a port on your router (usually labeled "WAN" or "Internet").
- Once the modem and router are wired together, your router broadcasts Wi-Fi wirelessly to your devices.
- If you want to avoid visible cables, you can place the modem and router close together or hide the cable behind furniture, but the physical connection must exist.
What Cable You Need and Where It Connects
You will need a standard Ethernet cable, also called a Cat5e, Cat6, or Cat6a cable. These look like thick phone cords with plastic connectors on each end. Most modems and routers come with one Ethernet cable in the box, so you may not need to buy one separately. If you do need to purchase a cable, they cost between $5 and $15 depending on length and quality.
On your modem, locate the port labeled "LAN" or "Ethernet"—it is usually on the back or side. On your router, find the port labeled "WAN", "Internet", or "Uplink"—this is typically a different color (often blue or yellow) from the other Ethernet ports on the router. Plug one end of the Ethernet cable into the modem's LAN port and the other end into the router's WAN port. The cable will click into place when it is fully inserted.
Setting Up Your Router After the Cable Connection
Once the Ethernet cable is connected, power on both the modem and router if they are not already running. Wait 2 to 3 minutes for both devices to fully boot up—you will see lights on the front of each device stabilize and stop blinking rapidly. The modem's lights should show that it has an internet connection (usually a green light labeled "Online" or "Internet"). The router's lights should show that it is receiving data from the modem.
Open a web browser on a computer or phone connected to the router's Wi-Fi network and go to the router's setup page. The address is usually printed on a sticker on the router itself—common addresses are 192.168.1.1 or 192.168.0.1, or you can type the router's brand name followed by ".local" (for example, netgear.local). Log in using the default username and password, also printed on the router's sticker. From there, you can name your Wi-Fi network, set a password, and configure other settings.
Troubleshooting When the Connection Does Not Work
If the modem and router are connected but you have no internet, first check that the Ethernet cable is fully clicked into both ports—a loose connection is the most common cause. Power off both devices, wait 30 seconds, and power them back on in this order: modem first, then router. Wait for the modem's internet light to turn solid green before turning on the router.
If the modem's internet light is not green after 5 minutes, the problem is between the modem and your ISP, not between the modem and router. Contact your ISP to report that the modem has lost connection. If the modem's light is green but the router shows no internet, try a different Ethernet cable—the first one may be damaged. If you still have no connection after swapping cables, restart the router's setup process or contact your router's manufacturer for support.
Why Some People Think Wireless Connection Is Possible
Gateway devices—single units that combine a modem and router—can create the impression that wireless connection is possible because you only see one box. In reality, the modem and router components inside the gateway are still wired together internally. You do not see the connection because it is hidden inside the device, but it exists.
Some people also confuse the wireless connection between a router and a device (like your phone) with the connection between a modem and router. Your phone connects to the router wirelessly, but the router itself must be wired to the modem. This is why moving your router far away from your modem will not break the connection—the Ethernet cable can run through walls, under floors, or along baseboards as long as it physically connects the two devices.
Positioning Your Modem and Router to Hide the Cable
If you want to minimize the appearance of the Ethernet cable, place your modem and router close together—ideally within 10 feet of each other. This keeps the cable short and easier to hide. You can run the cable behind furniture, along a baseboard, or through a cable raceway (a plastic channel that holds cables and blends into walls). Many people place both devices in a closet, cabinet, or entertainment center where the cable is out of sight.
Keep in mind that the closer your router is to your modem, the less distance the Wi-Fi signal has to travel before it starts broadcasting. Placing both devices in a central location in your home, rather than hiding them in a corner, will give you better Wi-Fi coverage throughout your rooms. You may need to balance aesthetics with signal strength depending on your home's layout.
When to Call Your ISP or Router Manufacturer
Contact your ISP if the modem's internet light is not green after 10 minutes of being powered on, or if it keeps losing connection even after you have restarted both devices. Your ISP can check whether your account is active and whether the signal is reaching your modem correctly. They may also send a technician if the modem itself is faulty.
Contact your router's manufacturer (the brand name is usually on the device) if the modem's internet light is green but the router is not broadcasting Wi-Fi, or if you cannot log into the router's setup page. They can walk you through resetting the router or replacing it if it is defective. Most routers come with a one-year warranty, so if yours is new and not working, the manufacturer may replace it at no cost.
Frequently Asked Questions
Can I use a mesh Wi-Fi system instead of a traditional router?
Yes. A mesh system still requires an Ethernet cable from your modem to the main mesh node (the primary unit). The other nodes in the mesh system then connect to the main node wirelessly. The connection between modem and main node must still be wired.
What if my modem does not have an Ethernet port?
Most modems have at least one Ethernet port on the back. If yours does not, it may be a very old model or a mobile hotspot device rather than a traditional modem. Check your device's manual or contact your ISP to confirm what type of device you have and whether it can connect to a router.
Can I use a Wi-Fi extender instead of a router?
A Wi-Fi extender receives the router's wireless signal and rebroadcasts it to reach farther areas of your home. It does not replace the router and does not connect to the modem. You still need a router wired to your modem, plus an extender if you want to expand coverage.
Does the length of the Ethernet cable matter?
Ethernet cables work reliably up to 100 meters (about 330 feet). For home use, cable length does not affect speed or connection quality. You can use a 50-foot cable if needed without any performance loss.
What if I want to move my router far from my modem?
You can run a long Ethernet cable from your modem to your router in another room. This allows you to place the router in a central location for better Wi-Fi coverage while keeping the modem near the wall where your ISP's line enters your home. Just make sure the cable is protected so it does not get damaged.