Connect Your Devices to Xfinity Modem WiFi

To connect a device to your Xfinity modem's WiFi network, look for the network name (SSID) and password printed on a sticker on the modem itself — usually on the back or bottom. The sticker shows both the 2.4 GHz and 5 GHz network names, which may be the same name or slightly different. On your phone, tablet, or computer, open your WiFi settings, find the Xfinity network name in the list, select it, and enter the password exactly as printed.

The password is case-sensitive, so match uppercase and lowercase letters precisely. If you enter it wrong, your device will show "incorrect password" and disconnect. Once you enter the correct password, your device will connect and you should see a WiFi symbol or "connected" status. This usually takes a few seconds.

If you cannot find the network name on the sticker, the modem may not be fully powered on yet. Check that the power cable is plugged in firmly and that the lights on the front of the modem are on. Wait two to three minutes after plugging in a new modem before trying to connect — it takes time to start up.

Key Takeaways

  • The WiFi network name and password are printed on a sticker attached to your Xfinity modem, usually on the back or bottom.
  • Your modem broadcasts two networks — one at 2.4 GHz and one at 5 GHz — and you can connect to either one using the password on the sticker.
  • Enter the password exactly as shown, including uppercase and lowercase letters, or your device will reject it.
  • After plugging in a new modem, wait two to three minutes for it to fully start before trying to connect any devices.
  • If your modem has no lights on the front, check that the power cable is plugged in firmly at both the modem and the wall outlet.

Locate the Network Name and Password on Your Modem

Every Xfinity modem has a label with the WiFi information you need. This label is usually stuck to the back of the modem, but on some models it may be on the bottom or the side. The label shows the network name (sometimes called SSID) and the password (sometimes called the WiFi key or passphrase). Write down both pieces of information or take a photo of the label so you have them handy.

The label may show two network names — one ending in "-2.4" and one ending in "-5G" — or it may show one name that works for both. Both networks use the same password. The 5 GHz network is faster but has a shorter range, while the 2.4 GHz network is slower but reaches farther. For most devices, either network works fine.

If the label is worn, faded, or missing, you can find the network name and password in your Xfinity account online. Log into your Xfinity account at xfinity.com, go to the Internet section, and look for WiFi settings or modem information. You can also call Xfinity customer service at 1-800-934-6489 and they can tell you the network name and password for your modem.

Connect a Phone or Tablet to Your Xfinity WiFi

On an iPhone or iPad, go to Settings, tap WiFi, and turn WiFi on if it is off. You will see a list of available networks. Find your Xfinity network name in the list and tap it. A box will appear asking for the password. Type the password from the modem label exactly as shown — uppercase and lowercase letters matter. Tap Join or Connect.

On an Android phone or tablet, go to Settings, tap Network or WiFi, and turn WiFi on. Find your Xfinity network name in the list and tap it. Enter the password exactly as printed on the modem label and tap Connect. Your phone will show a checkmark or "connected" next to the network name once it is linked.

If your device shows "incorrect password" after you enter it, double-check that you typed it correctly. Common mistakes include confusing the letter O with the number 0, or the letter I with the number 1. If the password still does not work, restart your modem by unplugging it for 30 seconds, plugging it back in, and waiting two minutes before trying again.

Connect a Computer or Laptop to Your Xfinity WiFi

On a Windows computer, click the WiFi icon in the bottom right corner of the screen (it looks like radio waves). A list of available networks will appear. Click your Xfinity network name and then click Connect. A box will ask for the password — type it exactly as shown on the modem label and click Next. Windows will connect and show "connected" next to the network name.

On a Mac, click the WiFi icon in the top right corner of the menu bar. Find your Xfinity network name in the dropdown list and click it. A box will ask for the password. Type the password from the modem label exactly as printed and click Join. Your Mac will connect and show a checkmark next to the network name.

If your computer connects but has no internet, restart your modem. Unplug the power cable from the back of the modem, wait 30 seconds, and plug it back in. The lights on the front will blink as it restarts — this takes about two minutes. Once the lights stop blinking and settle into a steady pattern, try opening a website to test your connection.

Restart Your Modem if Devices Cannot Connect

If a device cannot find your Xfinity network or keeps disconnecting, restart the modem. Unplug the power cable from the back of the modem and wait 30 seconds. Plug the power cable back in. The lights on the front will blink and flash as the modem restarts — this is normal and takes about two to three minutes.

While the modem is restarting, do not unplug it again or turn off your devices. Once the lights settle into a steady pattern (usually a solid green light), the modem is ready. Try connecting your device again. If the network name does not appear in your device's WiFi list, wait another minute and refresh the list.

If restarting does not fix the problem, check that the modem is in a central location in your home, away from walls, metal objects, and other electronics like microwaves or cordless phones. These can interfere with WiFi signals. Also make sure the modem is not in a closet or cabinet, as this blocks the signal. Moving the modem to an open, elevated spot often solves connection problems.

Change Your WiFi Password if You Forget It

If you forget your WiFi password, you can reset it through your Xfinity account. Log into xfinity.com with your username and password. Go to the Internet section and look for WiFi settings or modem settings. You should see an option to view or change your WiFi password. Follow the on-screen steps to create a new password.

The new password will take effect within a few minutes. Any devices currently connected will stay connected, but when you disconnect and reconnect, you will need to use the new password. Write down the new password or take a screenshot so you do not lose it again.

If you do not have an Xfinity account online or cannot log in, call Xfinity customer service at 1-800-934-6489. They can help you reset your password over the phone. Have your account number or the phone number associated with your account ready when you call.

Frequently Asked Questions

Why does my device show the Xfinity network but cannot connect?

This usually means you entered the password incorrectly. Passwords are case-sensitive, so uppercase and lowercase letters must match exactly. Try again, typing slowly and checking each character. If it still does not work, restart your modem by unplugging it for 30 seconds, waiting for it to restart, and trying again.

Can I connect multiple devices to the same Xfinity modem?

Yes. Your modem broadcasts one WiFi network (or two if you count 2.4 GHz and 5 GHz separately), and you can connect as many devices as you want to it. Most home modems handle 20 to 50 devices without problems. If you have many devices and notice slow speeds, restart the modem or move some devices to the 5 GHz network if available.

What if the password on my modem sticker does not work?

The sticker password is the default password set at the factory. If someone changed the password after installation, the sticker will no longer be correct. Check your Xfinity account online or call customer service at 1-800-934-6489 to find out the current password. They can also reset it to the default if needed.

Do I need to restart my modem every time I want to connect a new device?

No. Once your modem is on and running, you can connect new devices anytime without restarting. Just find the network name in your device's WiFi settings, select it, and enter the password. Restarting is only necessary if devices cannot find the network or keep disconnecting.