The two ways to run two routers from one modem
You can connect two routers to one modem in two different ways: daisy-chain mode (one router plugged into the other) or access point mode (both routers plugged into the modem). Daisy-chain is simpler to set up but slower and more prone to lag. Access point mode is faster and more stable, but requires you to disable the second router's built-in modem features.
Which one you choose depends on where you need the second router and how much speed matters. If you need coverage in a distant room and speed is not critical, daisy-chain works. If you need strong signal and fast speeds in multiple areas, access point mode is worth the extra setup steps.
Key Takeaways
- Daisy-chain mode plugs the second router into the first router's ethernet port and works when ready, but splits your bandwidth between the two routers.
- Access point mode plugs both routers directly into the modem and requires you to turn off the second router's DHCP server and wireless name duplication.
- Access point mode gives you faster speeds and more stable connections because both routers talk directly to the modem instead of through each other.
- You will need at least two ethernet cables and access to the second router's settings page to switch it to access point mode.
Daisy-chain mode: the quick setup
Daisy-chain mode means plugging the second router into an ethernet port on the first router. The first router stays connected to the modem as usual. This works when ready with no settings changes—the second router will broadcast its own wireless network, and devices can connect to either one.
The trade-off is speed. When you use daisy-chain, all data from devices connected to the second router has to travel through the first router to reach the modem. This cuts your available bandwidth roughly in half. If you are streaming video or downloading large files on both routers at the same time, you will notice the slowdown. Daisy-chain is best for extending coverage to a dead zone where speed is less important—a garage, a basement corner, or a guest bedroom where people mostly check email and browse.
Access point mode: the faster option
Access point mode plugs both routers directly into the modem using separate ethernet cables. The second router stops acting like a router (which would create conflicts) and becomes a wireless access point—it broadcasts signal but does not manage the network.
This setup is faster because devices on the second router connect directly to the modem's network, not through the first router. Both routers can handle traffic at full speed without bottlenecking each other. The tradeoff is that you have to change settings on the second router, which takes about five minutes.
How to set up access point mode step by step
Start with the second router unplugged. You will need two ethernet cables: one from the modem to the first router (already in place), and one from the modem to the second router.
Plug the second router into a power outlet and wait for its lights to stabilize—usually 30 to 60 seconds. Then plug an ethernet cable from one of the modem's ethernet ports into one of the ethernet ports on the second router. Do not use the port labeled "WAN" or "Internet" on the second router; use one of the regular ethernet ports.
Open a web browser and go to the second router's settings page. The address is usually printed on the router's label (often something like 192.168.1.1 or 192.168.0.1). Log in with the username and password on the label—the default is often "admin" and "admin" or "admin" and the router's serial number.
Look for a setting called DHCP, DHCP Server, or Network Mode. Turn DHCP off. This stops the second router from trying to assign IP addresses to devices, which would conflict with the first router. Save and reboot the router.
Next, find the wireless settings and change the network name (SSID) to something different from the first router's name. You can use the same password if you want, but the names must be different so devices know which router they are connecting to. Save these changes.
The second router is now in access point mode. Devices will see two wireless networks with different names, both connected to the same modem. You can move the second router to wherever you need better coverage.
When to use each mode
Use daisy-chain mode if the second router is in a room next to the first one, or if you are testing the setup before committing to it. It requires zero configuration and works right away. The speed loss only matters if you are doing heavy downloading or streaming on both routers simultaneously.
Use access point mode if the second router is far from the first one, if you need strong signal in multiple areas of your home, or if you are running bandwidth-heavy tasks on both networks. The setup takes longer, but the speed and stability are noticeably better. If you have a very large home and two routers still do not cover everything, you can add a third router in access point mode the same way—just plug it into the modem and disable DHCP.
Troubleshooting common problems
If devices connect to the second router but have no internet, the most common cause is that DHCP is still turned on. Go back into the second router's settings and make sure DHCP is off. Save and reboot.
If you cannot reach the second router's settings page, make sure it is plugged into power and that the ethernet cable is connected. Try unplugging it for 10 seconds and plugging it back in. If the settings page address does not work, try 192.168.0.1 or 192.168.1.1—different brands use different defaults. If the second router keeps dropping the connection, try moving it closer to the modem temporarily to rule out cable problems. A loose ethernet cable is the most common cause of intermittent disconnects.
When to call a professional
If you have tried both setup methods and neither one works, or if your modem only has one ethernet port and you cannot add more, a technician from your internet provider can help. Some modems have built-in routers that make dual-router setups tricky—a technician can tell you whether your setup is possible and help you configure it.
You should also reach out to your internet provider's support team if you are unsure whether your modem supports multiple routers or if you need help identifying the ethernet ports on your specific modem model.
Frequently Asked Questions
Can I use two routers from different brands?
Yes. As long as both routers have ethernet ports and can be configured through a web browser, they will work together in either daisy-chain or access point mode. The brand does not matter.
Will two routers slow down my internet speed?
Daisy-chain mode will slow you down because data travels through both routers. Access point mode will not—both routers connect directly to the modem at full speed. The internet speed you pay for stays the same either way; daisy-chain just divides it between the two routers.
Do both routers need to have the same password?
No. You can give them different passwords if you want. Many people use the same password so devices can roam between networks without reconnecting, but it is not required.
What if my second router does not have a web settings page?
Most routers made in the last 10 years have a web settings page. Check the label on the back or bottom of the router for the default address. If there is no address listed, try 192.168.1.1 or 192.168.0.1. If neither works, the router may only have a mobile app instead—check the manufacturer's website for the app name.
Can I switch between daisy-chain and access point mode later?
Yes. If you start with daisy-chain and later want to move to access point mode, just unplug the second router from the first one, plug it into the modem, and follow the access point setup steps. You can switch back the same way.