Connect the Ethernet cable from your modem to your router's WAN port
The physical connection between your modem and router uses a single Ethernet cable — the same type of cable your modem uses to connect to the wall jack. One end plugs into the port on the back of your modem labeled "Ethernet," "LAN," or sometimes just a single port that stands apart from the others. The other end goes into the port on your router labeled "WAN" (Wide Area Network), "Internet," or "Uplink." This port is usually a different color — often yellow or blue — and sits separate from the other ports on the back.
Push the cable in firmly until you hear or feel a click. Both ends should have a small plastic clip that locks into place. If the connection is loose, your internet will drop or not work at all. Check that the cable is fully seated before moving to the next step.
Power on your modem and wait for it to fully boot
Plug your modem into a power outlet and press the power button if it has one. Most modems start automatically when plugged in. Look at the lights on the front of the modem — you should see several indicator lights. The exact lights vary by modem model, but typically you will see lights for power, internet connection, and data activity.
Wait two to three minutes for the modem to fully start up. You will know it is ready when the internet light (often labeled "Online," "Internet," or shown as a globe icon) stops blinking and stays solid. If the internet light stays red or off after three minutes, your modem may not have a signal from your internet service provider — unplug it, wait 30 seconds, and plug it back in. If it still does not connect after another three minutes, contact your internet service provider.
Power on your router and wait for startup lights to stabilize
Plug your router into a power outlet. Most routers start automatically, though some have a power button on the back or bottom. The startup process takes one to three minutes. During this time, you will see lights on the front blinking as the router initializes.
Wait until the lights stop changing rapidly and settle into a steady pattern. The WiFi light (often a fan or radio wave symbol) should be solid or blinking slowly. Once the lights have stabilized, your router is ready to configure. Do not unplug or restart the router during this startup period, as it can interrupt the boot process.
Key Takeaways
- The Ethernet cable connects the modem's main port to the router's WAN or Internet port, which is usually a different color from the other ports.
- Your modem must fully boot and show a solid internet light before you power on the router, or the router will not detect an internet connection.
- The router takes one to three minutes to start up; wait for the lights to stop blinking rapidly before you try to configure it.
- If your modem's internet light does not turn solid after three minutes, restart the modem and check with your internet service provider for signal issues.
- Once both devices are powered on and their lights are stable, you can access the router's settings through a web browser or mobile app to set up your WiFi network name and password.
Access your router's settings through a web browser
Open a web browser on a computer, phone, or tablet that is connected to the router via Ethernet or WiFi. In the address bar, type the router's default IP address. For most routers, this is 192.168.1.1 or 192.168.0.1 — check the sticker on the bottom or back of your router to confirm the exact address. Press Enter.
A login page will appear. Enter the default username and password, which are also printed on the sticker on your router. Common defaults are "admin" for both username and password, but this varies by manufacturer. If you have changed the password before and cannot remember it, you will need to reset the router to factory settings by holding the reset button for 10 to 15 seconds.
Create your WiFi network name and password
Once you are logged in, look for a section called "WiFi Settings," "Wireless," or "Network Name." You will see a field for the network name, also called the SSID (Service Set Identifier). This is the name that appears when you search for WiFi networks on your phone or computer. Enter a name you will recognize — it can be anything you choose.
Below that, find the password field, often labeled "WiFi Password," "Passphrase," or "Pre-Shared Key." Create a password that is at least 12 characters long and includes uppercase letters, lowercase letters, numbers, and symbols. Write this password down or save it somewhere safe — you will need it every time you connect a new device to your WiFi. Click Save or explore to confirm your changes.
Connect your devices to the new WiFi network
On your phone, tablet, or computer, open the WiFi settings and look for your new network name in the list of available networks. Select it and enter the password you just created. The device should connect within a few seconds. Once connected, open a web browser and visit any website to confirm that your internet is working.
Repeat this process for every device you want to connect — laptops, phones, smart speakers, streaming devices, and anything else that uses WiFi. If a device does not connect, double-check that you entered the password correctly. Passwords are case-sensitive, meaning uppercase and lowercase letters are treated as different characters.
Frequently Asked Questions
What if I do not see the internet light on my modem turn solid?
The modem is not receiving a signal from your internet service provider. Unplug the modem, wait 30 seconds, and plug it back in. If the light still does not turn solid after three minutes, restart your modem one more time. If it remains off or red, contact your internet service provider — the issue is on their end, not with your equipment.
Can I use a WiFi extender instead of a router?
No. A WiFi extender connects to an existing WiFi network and rebroadcasts it; it does not create a network from scratch. You need a router to convert the modem's internet signal into WiFi. An extender can be added later if you need to reach WiFi in distant parts of your home.
Why is my WiFi password not working when I try to connect a device?
Passwords are case-sensitive, so check that uppercase and lowercase letters match what you entered in the router settings. If you are still locked out, log back into the router settings and reset the WiFi password to something simpler. Make sure you are connecting to the correct network name — some routers broadcast both 2.4 GHz and 5 GHz networks with slightly different names.
Do I need to restart my modem and router after connecting them?
No, not if both devices powered on correctly and their lights are stable. However, if you change your WiFi settings or experience connection problems, restarting both devices (unplug for 30 seconds, then plug back in) often fixes the issue. Always restart the modem first, wait for it to fully boot, then restart the router.