A factory reset clears all your modem settings and returns it to the state it left the factory
A factory reset wipes your modem's configuration — your WiFi name, password, custom DNS settings, port forwarding rules, and any other changes you made. After the reset, the modem goes back to default settings, which means you will need to set up your internet connection again from the beginning. Most modems take 5 to 10 minutes to reset and restart.
You should factory reset your modem if it is not connecting to the internet, if you forgot your admin password, if you are selling or giving away the modem, or if you want to clear out old settings that might be causing problems. A factory reset is different from a power cycle (unplugging and plugging back in), which does not erase settings.
Key Takeaways
- A factory reset erases all settings and returns the modem to its original state, so you will need to reconfigure your internet connection afterward.
- Most modems have a small reset button on the back or bottom that you hold down for 10 to 15 seconds with a paperclip or pen.
- Some modems let you reset through the admin panel (usually at 192.168.0.1 or 192.168.100.1) instead of using the physical button.
- After a reset, your modem will restart and you will need to contact your internet service provider to re-register it on the network.
- Write down your current WiFi name and password before you reset, so you have them for reference when you set up again.
Locate the reset button on your modem
The reset button is usually a small, recessed hole on the back or bottom of the modem. It is often labeled "Reset" or "Factory Reset" and is smaller than the power button. Because it is recessed, you cannot press it with your finger — you need a tool like a paperclip, ballpoint pen, or the tip of a straightened paper clip to reach it.
Check your modem's manual or the manufacturer's website if you cannot find the button. Common modem brands like Netgear, Arris, Motorola, and TP-Link all have the reset button in a similar location, but placement varies by model. Some older or simpler modems may not have a reset button at all and only allow reset through the admin panel.
Hold down the reset button for 10 to 15 seconds
Unplug the modem's power cable first. Wait 30 seconds, then plug it back in. Once the modem has powered on and the lights have stopped blinking (usually 1 to 2 minutes), use your tool to press and hold the reset button. Keep it pressed for 10 to 15 seconds — do not release early.
You will see the lights on the modem blink or change color while you are holding the button. This is normal and means the reset is happening. After you release the button, the modem will restart. This can take 2 to 5 minutes. Do not unplug the modem during this time.
Wait for the modem to fully restart
The modem's lights will go through a startup sequence. You will usually see the power light come on first, then the internet or connection lights will blink as the modem initializes. Once the lights stop changing and settle into a steady pattern (usually a solid power light and a blinking internet light), the modem is ready.
This restart process typically takes 3 to 5 minutes. If the modem does not restart after 10 minutes, unplug it, wait 30 seconds, and plug it back in. If it still does not start, the reset may not have worked and you may need to try again or contact your modem's manufacturer.
Reset through the admin panel if the button does not work
If your modem does not have a physical reset button or the button does not work, you can reset it through the web interface. Open a web browser on a computer connected to the modem (by WiFi or ethernet cable) and type the modem's IP address into the address bar. Common addresses are 192.168.0.1, 192.168.100.1, or 192.168.1.1.
Log in with the default username and password, which are usually printed on a sticker on the modem itself or in the manual. Look for a settings or administration section, then find the option for "Factory Reset," "Reset to Defaults," or "Restore Factory Settings." Click it and confirm. The modem will restart, and the process is the same as using the physical button.
Re-register your modem with your internet service provider
After the reset is complete, your modem is no longer registered on your internet service provider's network. You will not have internet access until you register it again. Contact your internet service provider by phone or through their website and tell them you have factory reset your modem. They will walk you through re-registration, which usually takes a few minutes.
During re-registration, your service provider may ask for your account number, the modem's serial number (printed on the sticker), or the MAC address (also on the sticker or visible in the admin panel). Have these details ready before you call. Once re-registration is complete, your modem should connect to the internet automatically.
Set up your WiFi and other settings again
After your modem is back online, log into the admin panel again using the default IP address. The default username and password should work because the modem has been reset. Change the WiFi network name (SSID) and password to something you want to use. You can also set a new admin password so you do not forget it next time.
If you had custom settings before the reset — such as port forwarding, a custom DNS server, or a static IP address — you will need to set those up again. Write them down or take screenshots this time so you have them for future reference. Most users do not need to change anything beyond the WiFi name and password.
Frequently Asked Questions
Will a factory reset delete my internet history or files on my computer?
No. A factory reset only affects the modem itself, not your computer or any devices connected to it. Your files, browsing history, and personal data on your devices remain unchanged. The reset only clears the modem's settings.
What is the difference between a factory reset and a power cycle?
A power cycle is unplugging the modem for 30 seconds and plugging it back in. It clears the modem's memory but does not erase your settings. A factory reset erases all settings and returns the modem to its original state. Try a power cycle first if you are having connection problems — it often fixes issues without requiring you to reconfigure everything.
How long does it take to factory reset a modem?
The physical reset button takes about 10 to 15 seconds to hold down, but the modem's restart can take 3 to 5 minutes. The entire process from start to finish is usually 5 to 10 minutes. Re-registering with your service provider may add another 10 to 15 minutes.
Can I factory reset my modem if I do not know the admin password?
Yes. The physical reset button works regardless of the password. If your modem does not have a reset button, a factory reset through the admin panel requires the password, but you can use the physical button instead. This is one reason a factory reset is useful if you have forgotten your admin credentials.
Do I need to unplug the modem before pressing the reset button?
It is not strictly necessary, but unplugging first and waiting 30 seconds before plugging back in ensures the modem is in a clean state. This reduces the chance of the reset not working properly. If you reset without unplugging first, hold the button for the full 10 to 15 seconds and wait for the restart to complete.