A factory reset clears all settings and returns your modem to its original state
A factory reset wipes your Xfinity modem back to the settings it had when it left the warehouse. This means your Wi-Fi network name and password disappear, your custom settings vanish, and the modem forgets every change you made. You will need to set it up again from the beginning, the same way you did when you first installed it.
Factory reset is different from a straightforward restart. A restart turns the modem off and back on but keeps your settings intact. A factory reset erases everything. Most people only need a factory reset when the modem is behaving so badly that nothing else fixes it — when it will not connect to the internet, when it keeps dropping the signal, or when you are about to return it or sell it.
The process takes about 10 minutes total, including the time the modem needs to restart and reconnect to Xfinity's network.
Key Takeaways
- A factory reset erases your Wi-Fi name, password, and all custom settings, so write down your Wi-Fi details before you start if you want to keep them.
- The reset button is a small recessed hole on the back of the modem — you press it with a straightened paperclip or similar tool for 10 to 15 seconds while the modem is powered on.
- After the reset, the modem takes 5 to 10 minutes to restart and reconnect to Xfinity's network, shown by lights turning on in sequence.
- Once the modem is back online, you will need to set up your Wi-Fi network name and password again through the modem's web interface or the Xfinity app.
- If the modem still will not work after a factory reset, the problem may be with your account or the modem itself, and you should contact Xfinity support.
Locate the reset button on the back of your modem
Turn your modem around and look at the back panel. You will see several ports — the coaxial cable port (where the thick cable from the wall plugs in), the power port, and usually an Ethernet port. Near these ports, you will find a small recessed button labeled "Reset" or sometimes just a tiny hole with no label.
The reset button is deliberately recessed so you cannot press it by accident. You cannot push it with your finger — you need a tool. A straightened paperclip, a ballpoint pen with the tip removed, or a SIM card ejector tool all work. Do not use anything sharp or metal that could damage the modem's internal components.
Press and hold the reset button for 10 to 15 seconds
Make sure the modem is powered on — the lights on the front should be lit. Insert your tool into the reset hole and press the button inside. Hold it down steadily for 10 to 15 seconds. You may see the lights on the front of the modem flicker or go dark. This is normal.
Do not release the button early. The full 10 to 15 seconds is necessary for the reset to take effect. If you let go too soon, the modem may not reset properly and you will have to try again.
Wait for the modem to restart and reconnect
After you release the reset button, the modem will begin its restart sequence. The lights on the front will go dark, then come back on one by one. This process usually takes 5 to 10 minutes. During this time, your internet will be down — do not unplug the modem or press any buttons.
Watch the lights as they come back. On most Xfinity modems, you will see the power light come on first, then the online light, then the downstream and upstream lights. When all the lights are steady (not blinking), the modem has reconnected to Xfinity's network and the reset is complete.
Set up your Wi-Fi network again through the modem's web interface
Once the modem is back online, you need to create a new Wi-Fi network name and password. Connect a computer or phone to the modem using an Ethernet cable (for a computer) or by searching for the modem's default Wi-Fi network (usually something like "XFINITY" or a model number).
Open a web browser and go to 192.168.0.1 or 192.168.100.1. You will see a login page. The default username is usually "admin" and the default password is often "motorola" or "admin" — check the sticker on the bottom or back of your modem for the exact credentials. Once you log in, look for a Wi-Fi or Wireless settings section and create a new network name and password.
Use the Xfinity app as an alternative setup method
If you have the Xfinity app on your phone, you can also set up your Wi-Fi through there. Open the app, go to the Internet section, and look for modem settings or Wi-Fi setup. The app will walk you through creating a new network name and password. This method is often simpler than using the web interface because the app guides you step by step.
Either method — the web interface or the app — will work. Choose whichever feels easier to you. Both result in the same finished setup.
Reconnect your devices to the new Wi-Fi network
Once you have created your new Wi-Fi network name and password, your devices will no longer be connected. Go to each device — your phone, laptop, tablet, smart TV, or anything else that uses Wi-Fi — and forget the old network. Then search for your new network name and enter the new password you just created.
Devices usually reconnect quickly once you enter the correct password. If a device refuses to connect, try forgetting the network again and reconnecting, or restart the device. Most connection problems resolve within a minute or two.
Frequently Asked Questions
What happens to my internet service during a factory reset?
Your internet goes down during the reset and restart process, which usually takes 5 to 10 minutes. The modem will reconnect to Xfinity's network automatically — you do not need to call anyone or do anything to restore service. Once the lights stop blinking and stay steady, you are back online.
Do I lose my Xfinity account or service plan when I factory reset the modem?
No. A factory reset only erases the modem's settings, not your account. Your service plan, billing, and account information stay exactly the same with Xfinity. You are only resetting the device itself, not your service.
What if I forget my new Wi-Fi password after I set it up?
Log back into the modem's web interface at 192.168.0.1 or use the Xfinity app to view or change your Wi-Fi password. You can also factory reset the modem again and set up a new password, though that will disconnect all your devices again.
Should I factory reset my modem if it is just running slowly?
Try a straightforward restart first — unplug the power cable for 30 seconds, then plug it back in. Most slow-modem problems clear up with a restart. Only do a factory reset if the modem is not connecting to the internet at all, keeps dropping the connection repeatedly, or a support agent tells you to.
What should I do if the modem still will not work after a factory reset?
Contact Xfinity support. The problem may be with your account, the coaxial cable connection, or the modem hardware itself. A support agent can check your account status and help you troubleshoot further or arrange a replacement modem if needed.