Connect the modem in three physical steps

A CenturyLink modem connects to your wall jack, power outlet, and router in a fixed order. Start by locating the phone line jack on your wall — it looks like a standard telephone outlet. Plug one end of the phone cable (usually included with your modem) into that wall jack, then plug the other end into the port on the back of the modem labeled Phone or Line.

Next, plug the power adapter into the modem's power port on the back, then into a wall outlet. The modem will take 30 to 60 seconds to power on. You will see lights on the front panel begin to light up — this is normal. Wait until the lights stabilize before moving to the next step.

Finally, take an ethernet cable and plug one end into the port on the back of the modem labeled Ethernet or LAN, then plug the other end into the WAN or Internet port on your router. If you do not have a separate router, you can connect a computer directly to the modem using an ethernet cable instead. The modem and router (or computer) will now begin communicating.

Key Takeaways

  • Connect the phone line from your wall jack to the modem's Phone port first, then plug in power.
  • Wait 30 to 60 seconds after powering on before connecting your router or computer.
  • Use an ethernet cable to connect the modem's Ethernet port to your router's WAN port, or directly to a computer if you have no router.
  • The lights on the front of the modem will show you the connection status — a solid or blinking light usually means the modem is working.

What the lights on your modem mean

CenturyLink modems have a row of lights on the front that tell you whether each part of the connection is working. The Power light (usually green) should be solid once the modem finishes starting up. The Phone light indicates whether the phone line connection is active — it may be solid or off depending on your service plan.

The Internet or Online light is the most important one. A solid green light means the modem has connected to CenturyLink's network and is ready to use. A blinking light means the modem is still connecting — wait another minute or two. If this light stays red or off after five minutes, the phone line connection may be loose or the line itself may be down.

The Ethernet light (if your modem has one) shows whether a device is plugged into the ethernet port. It will blink when data is being sent or received. If you are using Wi-Fi instead of ethernet, you may not see this light light up, and that is fine.

Set up Wi-Fi if your modem has it

Some CenturyLink modems include a built-in Wi-Fi router, while others are modem-only devices. Check the back of your modem for a label or sticker — if it lists Wi-Fi channels (like 2.4 GHz or 5 GHz), your modem has Wi-Fi built in. If it does not, you will need a separate router to use wireless devices.

If your modem has Wi-Fi, the network name and password are printed on a sticker on the bottom or back of the device. Look for labels like SSID (the network name) and Password or Key. On your phone, tablet, or computer, go to your Wi-Fi settings, find the network name from the sticker, and enter the password exactly as shown — it is case-sensitive.

Once you connect, open a web browser and try visiting a website to confirm you have internet access. If the page loads, your modem is working. If not, wait another minute and try again — the connection may still be stabilizing.

Restart the modem if the internet stops working

If your internet drops or becomes very slow, restarting the modem often fixes it. Unplug the power cable from the back of the modem and wait 30 seconds — this clears the modem's memory. Plug the power cable back in and wait another 60 to 90 seconds for the modem to fully restart. The lights will go dark, then come back on one by one.

Once the Internet light is solid green again, try loading a website. Most connection problems clear up after a restart. If the internet still does not work after restarting, check that the phone line cable is firmly plugged into both the wall jack and the modem's Phone port — a loose connection is the most common cause of lost service.

Check your modem model and CenturyLink documentation

CenturyLink provides different modem models depending on your location and service plan. The model number is printed on a label on the bottom or back of the device — it usually starts with letters like C or ZyXEL. If you need the exact setup steps for your model, you can search for "[model number] setup" online or call CenturyLink customer service at the number on your bill.

CenturyLink also provides a printed quick-start guide in the box with your modem. If you have lost it, the same information is usually available on the CenturyLink website under support or downloads — search for your modem model number there.

Frequently Asked Questions

Do I need a separate router if I have a CenturyLink modem?

Not always. If your modem has Wi-Fi built in, you can use it as both modem and router. However, many people add a separate router for better Wi-Fi range or performance. A separate router plugs into the modem's ethernet port and broadcasts its own Wi-Fi network.

What should I do if the Internet light stays red?

A red Internet light means the modem cannot reach CenturyLink's network. First, check that the phone line cable is fully plugged into both the wall jack and the modem's Phone port. If it is, unplug the power cable, wait 30 seconds, and plug it back in. If the light is still red after two minutes, the phone line itself may be down — contact CenturyLink to report the outage.

Can I move my modem to a different room?

Yes, as long as there is a phone jack in that room. Unplug the modem, move it, and plug the phone line into the nearest jack. The modem will reconnect within a minute or two. If there is no phone jack nearby, you can use a phone line extension cord (available at hardware stores) to reach the nearest jack.

Why is my Wi-Fi password different from what is on the modem sticker?

If you changed the password after setup, the sticker will show the original password, not your new one. To find your current password, log into the modem's settings page (usually by typing 192.168.0.1 into a web browser) or contact CenturyLink support.