Connect the modem to power and your internet line
Start by placing your CenturyLink modem in a central location in your home—ideally near where your internet line enters the building. Avoid enclosed spaces like cabinets or closets, which trap heat and slow the signal. Keep the modem at least a foot away from other electronics like televisions or microwaves.
Locate the power cable that came with your modem. Plug one end into the modem's power port (usually on the back) and the other end into a wall outlet or power strip. Do not use a surge protector with an on/off switch, because accidentally turning it off will disconnect your internet. Wait 30 to 60 seconds for the modem to power on—you will see lights begin to appear on the front panel.
Find the cable that connects to your wall outlet or CenturyLink equipment. This is typically a coaxial cable (thick, round, with a threaded connector). Screw this cable firmly into the port labeled "Cable In" or "Line In" on the back of the modem. Hand-tighten it—do not use pliers, which can damage the connection.
Key Takeaways
- Place your modem in a central, open location away from other electronics and at least one foot from walls or metal objects.
- Connect the coaxial cable from your wall outlet to the "Cable In" port on the modem, then plug in the power cable.
- Wait two to five minutes for the modem to fully boot and for the lights to stabilize before moving to the next step.
- Connect an ethernet cable from your modem to your computer or router to start using the internet.
- If lights do not appear or stay red after five minutes, restart the modem by unplugging it for 30 seconds, then plugging it back in.
Wait for the modem to fully boot up
After you plug in the power cable, the modem needs time to initialize and connect to CenturyLink's network. This process usually takes two to five minutes. During this time, you will see the lights on the front of the modem change—they may flash, turn on and off, or cycle through colors.
Look for a light labeled "Online," "Internet," or "Status." When the modem is ready, this light should be solid green or solid white (the exact color depends on your modem model). If you see a solid red light or no light at all after five minutes, the modem has not connected yet. Do not proceed to the next step—instead, move to the troubleshooting section below.
Connect an ethernet cable to your device
Once the online light is solid and stable, take an ethernet cable (a thin cable with plastic connectors on both ends). Plug one end into any of the ports on the back of the modem labeled "Ethernet," "LAN," or with a number like "1," "2," "3," or "4." These ports are usually yellow or white and smaller than the cable port.
Plug the other end of the ethernet cable into the ethernet port on your computer, laptop, or router. The cable should click into place. Your device should recognize the connection within a few seconds—you may see a notification or icon appear on your screen indicating that you are now connected to the internet.
Set up your Wi-Fi network (optional)
If your CenturyLink modem has built-in Wi-Fi, you can connect wirelessly instead of using an ethernet cable. Look for a sticker on the back or bottom of the modem that shows a Wi-Fi network name (called an SSID) and a password. The network name often starts with "CenturyLink" or "CLink" followed by numbers.
On your phone, tablet, or laptop, open your Wi-Fi settings and search for available networks. Select the network name from the sticker. When prompted, enter the password exactly as it appears on the sticker—passwords are case-sensitive, so match uppercase and lowercase letters carefully. Once you enter the password, your device should connect within a few seconds.
If you want to change the Wi-Fi network name or password to something easier to remember, you will need to log into the modem's settings page. Open a web browser and type 192.168.0.1 into the address bar, then log in using the username and password on the sticker (usually "admin" and "motorola" or similar). From there, you can customize your network settings.
Restart the modem if lights are not stable
If the online light remains red, flashing, or off after five minutes, the modem has not connected to CenturyLink's network. The fastest fix is a restart. Unplug the power cable from the back of the modem and wait 30 seconds—count slowly or set a timer. This clears the modem's memory and forces it to reconnect from scratch.
Plug the power cable back in and wait another two to five minutes for the modem to boot up again. Watch the lights cycle through their startup sequence. If the online light turns solid green or white this time, the restart worked and you can proceed with connecting your device. If the light is still red or off after the second attempt, check that the coaxial cable from your wall is screwed in tightly—a loose connection is the most common reason modems fail to connect.
Check your internet connection
Once you are connected via ethernet or Wi-Fi, open a web browser and visit a straightforward website like google.com or example.com. If the page loads, your modem is working correctly and you have internet access. If the page does not load or times out, the modem may still be initializing—wait another minute and try again.
If you still cannot reach any websites after waiting, restart your device (computer, phone, or tablet) rather than the modem. Device restarts often clear connection problems faster than modem restarts. If restarting your device does not work, unplug the modem again for 30 seconds, plug it back in, and wait the full five minutes before testing again.
Frequently Asked Questions
What do the different lights on my CenturyLink modem mean?
The "Online" or "Internet" light should be solid green or white when connected. A solid red light means the modem is powered on but not connected to the network. A flashing light means the modem is still initializing or trying to connect. If a light is off entirely, that function may not be active or available on your modem model.
Can I use a wireless router with my CenturyLink modem?
Yes. Connect an ethernet cable from one of the modem's LAN ports to the "Internet" or "WAN" port on your router. The router will then broadcast its own Wi-Fi network. This setup gives you more control over your Wi-Fi settings and range than using the modem's built-in Wi-Fi alone.
Why is my modem not connecting even though the cable is plugged in?
The coaxial cable may be loose or damaged. Unscrew it from the modem, inspect the connector for bent pins or dirt, and screw it back in firmly. If the connector looks damaged, contact CenturyLink for a replacement cable. Also check that the cable is coming from an active CenturyLink line—if you recently moved, the line may not be activated yet.
Do I need to restart my modem regularly?
Most modems do not need regular restarts. However, if your internet becomes slow or stops working, unplugging the modem for 30 seconds and plugging it back in often fixes the problem. If you need to restart more than once a week, contact CenturyLink to check whether your line or modem has a hardware issue.
What should I do if the modem still will not connect after restarting?
Check that the coaxial cable is hand-tight and not damaged. Verify that your CenturyLink service is active by contacting CenturyLink directly—new installations sometimes take 24 hours to set up. If the service is active and the cable is find, the modem itself may be faulty and may need to be replaced by CenturyLink.