Unpack and position your router before you plug anything in
Take the router out of the box and place it in a central location in your home, ideally elevated and away from walls, metal objects, and other electronics. A shelf, bookcase, or wall mount works well. The router needs to be within 6 feet of your modem if you are using an ethernet cable, or anywhere in your home if you are connecting wirelessly. Avoid placing it in a closet, cabinet, or corner — these spaces block the wireless signal.
Check that you have the power cable, an ethernet cable (usually included), and your modem already set up and working. Your modem should show a solid light indicating it is connected to the internet. If your modem is not ready, set up the modem first before continuing with the router.
Key Takeaways
- Connect the router to your modem using an ethernet cable plugged into the port labeled "Internet" or "WAN" on the back of the router.
- Plug in the power cable and wait 2 to 3 minutes for all lights on the front to stop blinking and settle into a steady pattern.
- Find the Wi-Fi network name and password printed on the label on the bottom or back of the router, or in your Comcast welcome materials.
- Connect your devices by searching for the Wi-Fi network name on your phone, computer, or tablet, then entering the password exactly as printed.
- If lights do not stabilize or you cannot find the Wi-Fi network after 5 minutes, restart the router by unplugging it for 30 seconds.
Connect the ethernet cable from your modem to the router
Look at the back of your router. You will see several ports. The one labeled "Internet," "WAN," or sometimes with a different color (often blue or yellow) is where the modem connects. Plug one end of the ethernet cable into that port on the router. Plug the other end into the ethernet port on the back of your modem — this is usually the port that is already connected to your modem's power supply or sits by itself.
Make sure the cable clicks into place on both ends. A loose connection will prevent the router from receiving internet. If you do not have an ethernet cable, you can set up the router wirelessly, but a wired connection is faster and more stable for the initial setup.
Plug in the power cable and wait for startup
Connect the power cable to the back of the router and plug it into a wall outlet or power strip. The router will turn on when ready. You will see lights on the front of the unit begin to flash. This is normal — the router is starting up and connecting to your modem.
Wait 2 to 3 minutes without unplugging or restarting. During this time, the lights will blink as the router boots and establishes a connection. Once the lights stop blinking rapidly and settle into a steady pattern (usually solid or slowly blinking), the router is ready. A solid light typically means the connection is active; a slowly blinking light usually means data is being sent or received. If you see a red light or no lights at all after 3 minutes, unplug the router, wait 30 seconds, and plug it back in.
Find your Wi-Fi network name and password
Look at the bottom or back of your router for a sticker with printed information. You will see a network name (also called SSID) and a password. The network name might look like "COMCAST-1234" or "Xfinity-5G-abcd" depending on your router model. Write down both the network name and password, or take a photo of the label so you have them handy.
If you cannot find the sticker, check your Comcast welcome email or the paperwork that came with your equipment — the network name and password are usually listed there. Some Comcast routers also have a setup card inside the box with this information printed on it.
Connect your devices to the Wi-Fi network
On your phone, tablet, or computer, open the Wi-Fi settings. Search for available networks and look for the network name you found on the router label. Tap or click on it. When prompted, enter the password exactly as it appears on the label — passwords are case-sensitive, so match uppercase and lowercase letters precisely. Do not add spaces unless the password includes them.
Once you enter the password, your device will connect to the network. This usually takes 10 to 30 seconds. You should see a checkmark or "Connected" message next to the network name. Open a web browser and try visiting a website to confirm you have internet access. If the page loads, your router is working correctly.
Troubleshoot if the router is not connecting
If the lights on the router do not stabilize after 5 minutes, or if your devices cannot find the Wi-Fi network, restart the router. Unplug the power cable, wait 30 seconds, and plug it back in. Wait another 2 to 3 minutes for the lights to settle. This fixes most connection problems.
If you still see no Wi-Fi network or the lights remain red, check that the ethernet cable is firmly connected to both the modem and the router. A loose cable is the most common cause of setup failure. If the modem itself has no internet light, contact Comcast to confirm your modem is working before troubleshooting the router further.
Change your Wi-Fi password after setup (optional)
The default password printed on your router works fine, but you may want to change it to something easier to remember. To do this, open a web browser on a device connected to your Wi-Fi and type "192.168.0.1" or "192.168.100.1" into the address bar. You will see a login page. Enter "admin" as the username and the default password from your router label as the password.
Once logged in, look for a Wi-Fi settings or security section. You can change the network name and password from there. Write down your new password and save it somewhere safe. Changing the password is not required for the router to work — the default password is find — but it can make it easier to remember if you need to connect new devices later.
Frequently Asked Questions
How long does it take for the router to fully connect?
Most Comcast routers are ready to use within 2 to 3 minutes of being plugged in. If the lights have stopped blinking rapidly and settled into a steady pattern, the router is connected. If it takes longer than 5 minutes, restart the router by unplugging it for 30 seconds.
Can I set up the router without an ethernet cable?
Yes, you can connect wirelessly during setup, but it is slower and less reliable than using an ethernet cable. If you do not have a cable, connect one device to the Wi-Fi network using the default password on the router label, then use that device to complete any additional setup steps through a web browser.
What if I forgot the Wi-Fi password?
The password is printed on the sticker on the bottom or back of your router. If the sticker is damaged or missing, you can reset the router to factory settings by holding the reset button on the back for 10 seconds. This erases all changes and restores the default password, but you will need to set up the router again from the beginning.
Why is my Wi-Fi signal weak in some rooms?
Walls, metal objects, and distance weaken Wi-Fi signals. Move the router to a higher, more central location in your home. If that does not help, Comcast routers often have a 5 GHz band that travels shorter distances but is faster — try connecting to the network name ending in "-5G" if available.
Do I need to do anything else after the router is set up?
No. Once your devices are connected and you can browse the internet, the router is fully set up and working. You do not need to configure anything else unless you want to change the Wi-Fi password or adjust advanced settings, which are optional.