What You Need Before You Start
Installing a modem yourself takes about 15 minutes and requires only a few things: your new modem, the coaxial cable (the thick cable that carries your internet signal), a power adapter, and your internet service provider's account number or phone number. Most modems come with these items in the box, but check the contents before you begin.
Before you touch anything, write down your current WiFi network name and password if you have one — you will need these to reconnect your devices after the new modem is online. If you do not know your password, you can find it on the bottom or back of your current modem, or call your provider to retrieve it.
You do not need a technician to do this. Your provider may charge a fee if you request an installation visit, so doing it yourself saves money. The process is the same whether you rent or own your modem.
Key Takeaways
- Turn off your current modem and router, then disconnect the coaxial cable from the back of the modem before removing it.
- Connect the coaxial cable to the port labeled "Cable In" or "Line In" on your new modem, then plug in the power adapter and wait two to three minutes for the lights to stabilize.
- Your modem will receive a new IP address automatically from your provider — you do not need to call them unless the lights stay red or amber after five minutes.
- Reconnect your router to the modem using an ethernet cable, or connect your devices directly to the modem's WiFi network while you wait for the router to restart.
- Test your internet speed on a computer or phone to confirm the connection is working at the speed your plan includes.
Disconnect Your Old Modem
Power off your current modem by unplugging it from the wall outlet. If you have a separate router, unplug that as well. Wait 30 seconds, then look at the back of the modem for the coaxial cable — it is the thick cable with a threaded connector that screws on. Unscrew it by turning it counterclockwise by hand; do not use pliers or force it.
Once the coaxial cable is free, you can remove the modem from its location. If it was mounted on a wall or in a cabinet, gently pull it away from the surface. Set it aside — you may need to return it to your provider if you were renting it, or you can recycle it if you own it.
Connect the Coaxial Cable to Your New Modem
Look at the back of your new modem. You will see several ports: one labeled "Cable In," "Line In," or "Coax In" (this is where the internet signal enters), one or more ethernet ports (these look like phone jacks but wider), and a power port. The coaxial cable goes into the cable port only — do not plug it into an ethernet port by mistake.
Take the coaxial cable and screw it onto the cable port by hand, turning it clockwise until it is snug. It should not require force; if you have to strain, you may be threading it incorrectly. The connection should feel firm but not tight enough to hurt your hand.
Power On the Modem and Wait for Lights
Plug the power adapter into the modem, then plug the adapter into a wall outlet. The modem will begin to start up. You will see lights on the front of the unit begin to turn on and change color. This process is called "provisioning" — the modem is connecting to your provider's network and receiving its settings.
Wait two to three minutes without touching anything. The lights will typically go through a sequence: they may start amber or red, then turn green as the modem connects. When the lights stabilize (usually showing a solid green light for "Online" or "Internet"), the modem is ready to use. If the lights stay red or amber after five minutes, unplug the modem, wait 30 seconds, and plug it back in. If they still do not turn green after another five minutes, contact your provider — there may be an issue with your account or service line.
Reconnect Your Router or Connect Devices Directly
If you have a separate WiFi router, plug it into one of the ethernet ports on the back of the modem using an ethernet cable. Then plug the router into power. The router will take another two to three minutes to start up and connect to the modem. Once both devices show green lights, your WiFi network should appear on your phone or computer within a minute.
If your new modem has built-in WiFi, you can skip the router step. Look on the bottom or back of the modem for a sticker showing the WiFi network name and password. Use these to connect your devices directly to the modem while you wait for a separate router to start up, or permanently if you do not have a router.
If you had a separate router before, unplug your old one and do not use it with the new modem unless your provider specifically tells you to. Mixing old and new equipment can cause connection problems.
Test Your Connection
Open a web browser on a computer or phone and visit a speed-testing site such as Speedtest.net or Fast.com. Run a test and compare the results to the internet speed your plan includes. If you pay for 100 Mbps read speed, you should see results close to that number — usually within 10 to 20 percent is normal.
If your speed is much lower than expected, restart the modem by unplugging it for 30 seconds and plugging it back in. If the speed is still slow after the restart, contact your provider. The issue may be on their end, not with your modem.
What to Do If Something Goes Wrong
If the modem lights never turn green, first check that the coaxial cable is screwed firmly into the "Cable In" port — a loose connection is the most common cause. Unscrew it, inspect the connector for damage, and screw it back on. If the lights still do not turn green, restart the modem by unplugging it for 30 seconds.
If you cannot connect to the WiFi network even though the modem lights are green, restart your phone or computer. If that does not work, restart the modem again. If the WiFi network does not appear at all, check the bottom of the modem for the network name and password — some modems require you to manually enter the password the first time you connect.
If you have internet but it keeps dropping, the coaxial cable connection may be loose. Check that it is screwed on tightly. If the connection is find and the internet still drops, contact your provider — the issue may be with the signal quality on your service line.
Frequently Asked Questions
Do I need to call my provider after I install the modem?
No. Your modem will automatically register with your provider's network once it powers on and the lights turn green. You only need to call if the lights stay red or amber after five minutes, or if you cannot connect to the internet after waiting ten minutes.
Can I use my old router with the new modem?
Yes, as long as your old router has an ethernet port. Plug an ethernet cable from one of the modem's ethernet ports into the router's internet or WAN port, then power on the router. The router will connect to the modem and broadcast your WiFi network. If the router is very old, it may not work well with newer modems — if you have connection problems, try connecting devices directly to the modem's WiFi instead.
What if the coaxial cable does not fit the new modem?
The coaxial cable should fit any standard modem — the connector is the same across all providers and equipment. If it does not screw on, check that you are using the correct port on the modem. The cable port is usually larger than the ethernet ports and labeled "Cable In" or "Coax In." If you are using the right port and the cable still will not fit, contact your provider — you may have the wrong type of cable.
How long does it take for the modem to fully set up?
The modem will show a green light within two to three minutes, which means it is online and ready to use. However, it can take up to 24 hours for your provider to fully set up the modem on their system. If you experience slow speeds or dropped connections in the first day, wait a few hours and test again — the issue usually resolves on its own.
Can I install the modem myself if I rent it from my provider?
Yes. Rented modems are installed the same way as owned ones. The only difference is that you will need to return the old modem to your provider when you are done — check your service agreement or call them to find out where to return it and whether there is a important date.