What you need to do before plugging in your new modem
Before you unbox your new modem, contact Comcast to register it on your account. You will need the modem's MAC address, which is printed on a sticker on the bottom or back of the device. Call Comcast at 1-800-934-6489 or log into your Comcast account online and add the new modem there. Comcast needs to know the MAC address so the network recognizes the device when you connect it.
While you have Comcast on the line or in your account, ask them to push a signal to your line once you have the modem plugged in. This refresh helps the modem sync faster. Some technicians will do this automatically; others wait for you to ask. If you are replacing a modem that is actively in use, Comcast can tell you the exact moment to unplug the old one and plug in the new one so you have the least downtime.
Key Takeaways
- Register your new modem's MAC address with Comcast before you plug it in, either by phone or through your online account.
- Connect the coaxial cable (the thick cable with the threaded connector) from your wall outlet to the modem's port labeled "Cable In" or "Coax In".
- Plug the power adapter into the modem and then into a wall outlet, and wait three to five minutes for all lights to stop blinking and turn solid.
- If the modem does not connect after five minutes, restart it by unplugging the power for 30 seconds, then plug it back in and wait again.
- Once the lights are solid, your devices should automatically reconnect to your Wi-Fi, or you may need to enter your Wi-Fi password again.
Connecting the coaxial cable from the wall to your modem
Locate the coaxial cable outlet on your wall. It looks like a small brass or silver port with a threaded ring around it, usually near where your old modem was plugged in. If you are unsure which outlet is for internet, look for one labeled "Cable" or "Internet"—do not use the outlet labeled "TV" or "Phone".
Take the coaxial cable that came with your new modem (or use the one from your old modem if it is in good condition). The connector on the end has a threaded ring. Screw it onto the wall outlet by hand—do not use pliers or a wrench. Hand-tight is the correct tension. If you over-tighten it, you can damage the connector and lose signal.
Follow the cable to your new modem and screw the other end onto the port labeled "Cable In," "Coax In," or sometimes just "In." Again, hand-tight is correct. The cable should now run from the wall outlet to your modem without kinks or sharp bends.
Powering on the modem and waiting for it to boot
Plug the power adapter into the modem's power port on the back. Then plug the adapter into a wall outlet or power strip. Do not use an outlet controlled by a light switch, because accidentally turning off the switch will disconnect your internet.
The modem will light up and begin its startup sequence. You will see lights on the front blinking in different colors—usually white, blue, or amber. This is normal. The modem is communicating with Comcast's network and downloading its configuration. This process takes three to five minutes. Do not unplug it or restart it during this time.
Watch the lights on the front of the modem. Most Comcast modems have lights for power, downstream, upstream, and online. Once all the lights stop blinking and turn solid (usually white or blue), the modem is ready to use. If one light remains red or amber after five minutes, see the troubleshooting section below.
Reconnecting your devices to Wi-Fi
Once the modem lights are solid, your Wi-Fi network should appear on your phone, laptop, or tablet. The network name (SSID) and Wi-Fi password are printed on a sticker on the modem itself. Look for a label that says "Wi-Fi Name" or "SSID" and "Wi-Fi Password" or "Passphrase."
On your device, open the Wi-Fi settings, find your network name in the list, and select it. When prompted, enter the password exactly as it appears on the sticker—passwords are case-sensitive, so uppercase and lowercase letters matter. Once you enter the password, your device should connect and you should have internet access.
If your devices do not automatically reconnect, you may need to "forget" the old network first. On most phones and computers, you can do this in Wi-Fi settings by selecting the old network name and choosing "Forget." Then reconnect using the new modem's credentials.
What to do if the modem does not connect after five minutes
If the lights are still blinking or one light is red or amber after five minutes, restart the modem. Unplug the power adapter from the wall outlet and wait 30 seconds. Then plug it back in and wait another three to five minutes for the lights to stabilize.
If the lights still do not turn solid, check that the coaxial cable is hand-tight at both ends—a loose connection is the most common reason a modem fails to sync. Unscrew the cable slightly and screw it back in firmly by hand. Wait another two minutes and check the lights again.
If the modem still does not connect, contact Comcast at 1-800-934-6489. Have the modem's model number and MAC address ready. Comcast can check whether the modem is registered on your account and whether there is a signal problem on the line. A technician may need to visit your home if the issue is with the wall outlet or the line itself.
Removing your old modem safely
Once your new modem is working and all your devices are connected, you can unplug and disconnect your old modem. Unscrew the coaxial cable from the old modem and unplug the power adapter. If the old modem is a rental from Comcast (check your bill or the device itself for "Comcast" branding), you will need to return it.
Comcast offers a few return options. You can drop it off at a Comcast store, mail it back using a prepaid label, or schedule a technician pickup. Visit the Comcast website or call 1-800-934-6489 to arrange the return. If you do not return a rental modem, Comcast may charge you a non-return fee, usually $10 to $15 per month until the device is returned.
If you purchased your own modem, you can keep it as a backup or sell it. If you no longer need it, check whether your local recycling program accepts modems—many electronics retailers like Best Buy also offer recycling.
Frequently Asked Questions
Do I need to call Comcast before I plug in the new modem?
Yes. Comcast needs to register the modem's MAC address on your account so the network recognizes it. You can do this by phone at 1-800-934-6489 or through your online account. Without registration, the modem may not sync to the network.
What if I lose internet for a few minutes during the switch?
Brief outages during modem replacement are normal. If you coordinate the swap with Comcast, they can minimize downtime. If your internet is out for more than 15 minutes after the new modem is plugged in and the lights are solid, restart the modem or contact Comcast.
Can I use the coaxial cable from my old modem?
Yes, if it is in good condition. Coaxial cables do not wear out quickly. If the connector is bent, corroded, or damaged, use the new cable that came with your modem instead. A damaged cable can cause signal loss and slow speeds.
Why are the lights on my modem blinking after 10 minutes?
Blinking lights after 10 minutes usually mean the modem has not synced to Comcast's network. Check that the coaxial cable is hand-tight at both ends. If it is, restart the modem by unplugging it for 30 seconds. If the lights still blink after restart, contact Comcast—there may be a signal issue on the line.
Do I need to set up a new Wi-Fi password?
No. The Wi-Fi name and password are printed on the modem's sticker. You can use them as-is. If you want to change them later, you can log into the modem's settings through a web browser, but this is optional and not necessary for the modem to work.