What You Need to Do Before You Plug Anything In
Before you open the box, contact Comcast to tell them you are installing a new modem. You can do this by phone at 1-800-934-6489, through the Xfinity app, or on their website. Have your account number ready. Comcast needs to know the modem's MAC address — a unique identifier printed on a sticker on the back or bottom of the device — so they can register it on your account.
The MAC address looks like this: 00:1A:2B:3C:4D:5E (letters and numbers separated by colons). Write it down before you call. Comcast will add it to their system, which usually takes a few minutes but can take up to an hour. Until they do, your modem will not connect to the internet.
Gather the cables that came in the box: a coaxial cable (thick, with a metal connector), an Ethernet cable (thin, with plastic clips on each end), and a power adapter. If you are replacing an old modem, you can reuse its coaxial cable if it is in good condition — it does not need to be new.
Key Takeaways
- Call Comcast with your new modem's MAC address before you plug it in, so they can register it on your account.
- Connect the coaxial cable to the wall outlet first, then to the modem's coax port, hand-tight only — do not use a wrench.
- Plug in the power adapter and wait three to five minutes for the lights to stop blinking and settle into a steady pattern.
- If the lights do not stabilize or you see a red light, restart the modem by unplugging it for 30 seconds, then plug it back in.
- If you still have no internet after 15 minutes, call Comcast to confirm they registered the modem and check for outages in your area.
Connecting the Coaxial Cable to Your Wall and Modem
Locate the coaxial outlet on your wall — it looks like a small round port with a threaded metal ring. This is where your cable signal enters your home. If you are replacing an old modem, unscrew the coaxial cable from the old one by turning it counterclockwise by hand. Do not use pliers or a wrench; hand-tight is all that is needed.
Screw the coaxial cable onto the wall outlet by hand, turning clockwise until it is snug. You should feel resistance, but you should not have to strain. Over-tightening can damage the connector inside the wall outlet.
Now screw the other end of the coaxial cable onto the port on the back of your new modem labeled Coax In or Cable In. Again, hand-tight is correct. If the cable was already connected to the wall when you started, straightforward disconnect it from the old modem and connect it to the new one.
Powering On and Waiting for Startup Lights
Plug the power adapter into the modem and then into a wall outlet or power strip. The modem will turn on when ready. You will see lights on the front of the device begin to blink — usually white, blue, or amber, depending on the model.
Do not touch anything for the next three to five minutes. The modem is going through its startup sequence: it is detecting the cable signal, connecting to Comcast's network, and downloading its configuration. During this time, the lights will blink in different patterns.
When startup is complete, the lights will stop blinking and settle into a steady state. Usually you will see a solid white or blue light for the internet connection and a solid light for power. Some models show separate lights for read and upload speeds. If all lights are solid and not red, your modem has connected successfully.
What the Lights Mean and When to Restart
A solid white or blue light means the modem is connected and working. A blinking light during startup is normal. A red light or a light that stays red after five minutes means the modem cannot connect to Comcast's network.
If you see a red light or the lights do not settle after five minutes, restart the modem. Unplug the power adapter from the wall, wait 30 seconds, and plug it back in. Wait another three to five minutes for the lights to stabilize. This restart clears temporary connection problems and is the first step Comcast will ask you to try anyway.
If the lights still do not settle or remain red after the restart, the modem may not be registered on your account yet. This is normal if less than an hour has passed since you called Comcast. Wait another 30 minutes and restart again. If the problem continues after that, call Comcast.
Testing Your Internet Connection
Once the lights are solid, open a web browser on any device connected to your home network — a phone on WiFi, a laptop, or a computer plugged in with an Ethernet cable. Try to load a website like google.com. If the page loads, your modem is working.
If the page does not load, restart the modem again (unplug for 30 seconds, plug back in) and wait five minutes. Then try the website again. If you still have no internet, check whether Comcast has an outage in your area by calling 1-800-934-6489 or checking the Xfinity app.
If there is no outage and the modem still will not connect, the MAC address may not have been registered correctly. Call Comcast with the MAC address again and ask them to manually add it to your account and refresh your connection.
Positioning Your Modem for the Best Signal
Place the modem in a central location in your home, away from walls, metal objects, and other electronics. A shelf or table in an open area works better than inside a cabinet or closet. If your modem has WiFi built in (many Comcast modems do), keeping it in an open space helps the wireless signal reach more of your home.
Keep the modem away from microwaves, cordless phones, and baby monitors, which can interfere with WiFi. Do not stack other devices on top of the modem or cover its vents — it needs airflow to stay cool.
If you are using an Ethernet cable to connect a computer or streaming device directly to the modem, you can place the modem closer to that device. Ethernet cables are not affected by distance or interference the way WiFi is.
When to Call Comcast for Help
Call Comcast if the modem lights remain red or blinking after you have restarted it twice and waited at least 15 minutes total. Also call if the lights are solid but you cannot load any websites, or if you can load some websites but not others.
Have the following information ready when you call: your account number, the modem's MAC address, and a description of what the lights are doing. If Comcast asks you to restart the modem during the call, do it while you are on the phone with them so they can see the lights change in real time.
If you are not comfortable working with cables or if you prefer to have a technician set up the modem, Comcast offers installation service for a fee. You can request this when you call to register the modem, or through the Xfinity app.
Frequently Asked Questions
Do I have to use a Comcast modem, or can I buy my own?
You can buy your own modem if it is on Comcast's list of approved devices. Check the Xfinity website or call Comcast to confirm your modem model is compatible before you buy. If you use your own modem, you still need to call Comcast with the MAC address so they can register it.
What if the coaxial cable is already connected to my old modem and I cannot unscrew it?
The connector may be stuck from age or corrosion. Try wrapping a cloth around the metal ring for better grip and turning slowly. If it still will not budge, do not force it — call Comcast and ask a technician to disconnect it. Forcing it can damage the connector or the cable.
Can I connect my computer directly to the modem with an Ethernet cable instead of using WiFi?
Yes. Plug one end of an Ethernet cable into the port on the back of the modem labeled Ethernet or LAN, and the other end into your computer's Ethernet port. This gives you a faster, more stable connection than WiFi, especially for large downloads or video calls.
How long does it take for Comcast to register a new modem after I give them the MAC address?
Usually a few minutes to an hour. If you call during business hours, it often happens while you are still on the phone. If you call after hours, it may take until the next business day. You can check the Xfinity app to see if the modem is registered — it will show up in your account devices list once it is active.
What should I do with my old modem?
If you rented it from Comcast, you must return it to avoid a monthly equipment fee. Comcast will send you a prepaid shipping label or you can drop it off at a local Comcast store. If you bought it yourself, you can recycle it at an electronics recycling center or donate it if it still works.