What You Need to Do Before You Plug In
Installing a new Xfinity modem takes about 15 minutes and requires no tools. You will need your modem, the power cable, an ethernet cable (usually included), and your Xfinity account number or the phone number associated with your account. Before you unplug your old modem, write down or take a photo of any cables connected to it so you can match them to the new one.
Power off your old modem and router by unplugging them from the wall outlet. Wait 30 seconds. This clears the connection and prevents conflicts when you set up the new modem. If you are replacing only the modem and keeping your existing router, you will reconnect them in the same way they were connected before.
Key Takeaways
- Unplug your old modem and wait 30 seconds before connecting the new one to avoid connection conflicts.
- Connect the coaxial cable (the thick cable from your wall outlet) to the port labeled "Cable In" on the back of your new modem.
- Plug the power cable into the modem and a wall outlet, then wait 2 to 3 minutes for all lights to turn solid blue or white.
- Call Xfinity at 1-800-934-6489 or use the Xfinity My Account app to set up your modem using your account number.
- If your modem does not set up after 30 minutes, restart it by unplugging the power cable for 30 seconds and plugging it back in.
Connect the Coaxial Cable from Your Wall
Locate the coaxial cable running from the wall outlet in your home. This is the thick cable with a metal connector on each end, usually labeled "Cable In" or "Internet In." Unscrew the connector from your old modem by turning it counterclockwise by hand—do not use pliers or force it.
Screw the coaxial cable onto the port labeled "Cable In" on the back of your new modem. Turn it clockwise by hand until it is snug. You should feel slight resistance, but you do not need to tighten it hard. A loose connection will cause slow speeds or no connection at all; an over-tightened one can damage the port.
Plug In the Power Cable and Wait for Startup
Connect the power cable to the port on the back of the modem labeled "Power" and plug the other end into a wall outlet or power strip. The modem will begin booting when ready. You will see lights on the front of the modem start to blink.
Wait 2 to 3 minutes for the lights to stabilize. Most Xfinity modems show a solid blue or white light on the "Online" or "Internet" indicator when they are ready. The "Power" light should also be solid. If the lights are still blinking after 5 minutes, unplug the modem, wait 30 seconds, and plug it back in. Do not move forward until the lights are solid.
Reconnect Your Router (If You Have One)
If you are using a separate router, connect an ethernet cable from the port labeled "Ethernet" or "LAN" on the back of your modem to the port labeled "Internet," "WAN," or "Uplink" on the back of your router. This is usually a yellow or blue port on the router. Plug in your router and wait another 2 to 3 minutes for it to boot up.
If you do not have a separate router and plan to use only the modem, you can skip this step. You can connect devices to the modem's built-in Wi-Fi network, though a separate router usually provides better range and speed.
set up Your Modem with Xfinity
Your modem will not work until Xfinity activates it on your account. You have two ways to do this: call Xfinity at 1-800-934-6489 or use the Xfinity My Account app on your phone or computer. Have your account number or the phone number on your account ready.
If you call, tell the representative that you are activating a new modem and provide your account information. They will look up your modem's MAC address (a unique identifier printed on a sticker on the back of the modem) and set up it remotely. If you use the app, look for an option to "set up Equipment" or "Add Device" and follow the on-screen steps. set up usually takes 5 to 10 minutes on the phone or 10 to 15 minutes through the app.
Test Your Connection and Troubleshoot if Needed
After set up, wait another 2 to 3 minutes for the modem to fully connect to Xfinity's network. Open a web browser on your phone or computer and try to load a website. If the page loads, your modem is working. If it does not, check that all cables are firmly connected and that the "Online" light on the modem is solid.
If your connection still does not work after 30 minutes, restart the modem by unplugging the power cable for 30 seconds and plugging it back in. Wait another 3 minutes for it to boot. If the problem continues, call Xfinity again—the representative can check whether the set up went through and whether there is an issue with your account or the modem itself.
Common Mistakes to Avoid
The most common error is plugging the coaxial cable into the wrong port. The "Cable In" port is always separate from the ethernet ports. If you connect the coaxial cable to an ethernet port, the modem will not detect a signal. Check the labels on the back of your modem before you connect anything.
Another mistake is not waiting long enough for the modem to boot. Many people unplug it or restart it within the first 2 minutes because the lights are still blinking. Let it sit for the full 3 minutes before you assume something is wrong. Restarting too early will only delay the process.
Do not forget to set up the modem with Xfinity. A modem that is physically connected and powered on will show lights, but it will not pass data until Xfinity activates it. If you skip this step, your devices will see the modem but will not be able to connect to the internet.
Frequently Asked Questions
Do I need to call Xfinity to set up the modem, or can I do it online?
You can do either. The Xfinity My Account app and website both have an option to set up new equipment. The app is usually faster if you have it installed. If you prefer to talk to someone, calling 1-800-934-6489 works just as well and takes about the same amount of time.
What if the lights on my modem are not turning solid after 10 minutes?
Unplug the modem for 30 seconds and plug it back in. If the lights still blink after another 5 minutes, check that the coaxial cable is screwed on tightly to the "Cable In" port. A loose connection is the most common reason the modem will not fully boot. If it is tight and the lights are still blinking, restart your router (if you have one) and wait another 3 minutes.
Can I use my old modem if I return the new one?
Yes. If you need to go back to your old modem, call Xfinity and ask them to deactivate the new one and reactivate the old one. They can do this over the phone. Physically, you just swap the cables and power back the way they were. Xfinity will handle the account side.
What should I do with my old modem after I install the new one?
If the modem is rented from Xfinity, you should return it to avoid a monthly rental fee. You can drop it off at an Xfinity store or mail it back using a prepaid label. If you own the modem, you can keep it as a backup or sell it. Check your bill to see whether you are renting or own the modem.
Why is my internet slow even though the modem lights look normal?
Slow speeds after a new modem installation are usually caused by a loose coaxial cable connection or interference from other devices. Check that the cable is hand-tight at both the wall and the modem. If speeds are still slow, restart the modem and router, then run a speed test on your phone or computer. If speeds are still below what you pay for, call Xfinity—the line to your home may have a signal issue that the technician can check.