What You Need to Do Before You Plug In

Installing a new Xfinity modem takes about 15 minutes and requires only a coaxial cable, an ethernet cable, and your modem. Before you start, gather your account number — you'll find it on your Xfinity bill or in the Xfinity My Account app — and write it down. Power off your old modem and router if you have them running, then unplug them from the wall.

Check that your coaxial cable (the thick cable that carries the internet signal) is screwed firmly into the wall outlet. If it's loose or corroded, hand-tighten it or replace it. The connection point should be snug but not so tight that you need a wrench. A loose coaxial connection is the most common reason a new modem won't register on the network.

Key Takeaways

  • Screw the coaxial cable into the modem's cable port, then plug the modem into power and wait three to five minutes for all lights to turn solid.
  • Your modem's lights should show a solid white or blue light on the power and internet status indicators once it has connected.
  • You can register your modem in the Xfinity My Account app or by calling 1-800-934-6489 with your account number and the modem's MAC address.
  • If your modem does not light up after five minutes, restart it by unplugging it for 30 seconds, then plugging it back in.
  • Once registered, your modem will broadcast a Wi-Fi network with a default name and password printed on the modem's label.

Connect the Cables and Power

Take your new modem out of the box and place it in an open, well-ventilated spot — not in a closet or cabinet where heat can build up. Screw the coaxial cable into the port labeled "Cable In" or "Coax In" on the back of the modem. Turn it clockwise by hand until it stops; do not force it.

Plug the modem's power cable into the back of the unit, then plug the other end into a wall outlet or power strip. The modem will start up automatically. Do not unplug it during startup — this can corrupt the firmware and require a factory reset.

Wait for the Lights to Stabilize

The modem's front panel has several indicator lights. When you first plug it in, you will see lights flash and change color as the modem boots up and searches for a signal. This process normally takes three to five minutes. During this time, the modem is communicating with Xfinity's network to read its configuration.

Once startup is complete, the power light should be solid white or blue, and the internet or online light should also be solid. If the internet light is red or off after five minutes, the modem is not detecting a signal on the coaxial cable. Unplug the modem, check that the coaxial cable is hand-tight at both the wall and the modem, then plug the modem back in and wait another five minutes.

Register Your Modem with Xfinity

Once the lights are solid, your modem is ready to register. Open the Xfinity My Account app on your phone or go to xfinity.com and sign in with your Xfinity username and password. Look for the option to add or register a device. You will need your account number and the modem's MAC address, which is printed on a sticker on the back or bottom of the modem — it looks like six pairs of letters and numbers separated by colons (for example, 00:1A:2B:3C:4D:5E).

If you prefer not to use the app, call 1-800-934-6489 and tell the representative you have a new modem to register. Have your account number and MAC address ready. The representative will add the modem to your account and may ask you to restart it once more. Registration usually takes a few minutes.

Connect Your Devices and Test the Connection

Once the modem is registered, it will broadcast a Wi-Fi network. The network name (SSID) and password are printed on a label on the modem itself. Open your phone or computer's Wi-Fi settings, select the network name, and enter the password. You should see an internet connection within 30 seconds.

To test your connection, open a web browser and go to any website — Google.com or Xfinity.com work well. If the page loads, your modem is working. If you see an error, restart your device's Wi-Fi or restart the modem by unplugging it for 30 seconds and plugging it back in.

What to Do If the Modem Won't Connect

If the internet light stays red or off after 10 minutes, the modem is not receiving a signal. First, check that the coaxial cable is connected to the correct port on the modem — it should say "Cable In" or "Coax In". Then check that the other end of the cable is screwed into the wall outlet, not into a splitter or another device.

If the cable is connected correctly and the light is still red, unplug the modem, wait 30 seconds, and plug it back in. If it still does not connect after another five minutes, the coaxial cable may be damaged or the wall outlet may not have an active signal. Try a different coaxial cable if you have one, or call 1-800-934-6489 to report the issue.

Frequently Asked Questions

What do the different colored lights mean on my Xfinity modem?

A solid white or blue light means the modem is working normally. A blinking light means the modem is still starting up or communicating with the network. A red light or no light means there is a problem — usually a loose cable or no signal at the wall outlet. Check your modem's manual for the exact meaning of each light, as colors vary by model.

Can I use my old modem's coaxial cable with the new modem?

Yes. Coaxial cables are standard and work with any modem. If your old cable is more than a few years old and shows visible damage or corrosion at the connectors, replace it with a new one — they cost five to ten dollars and can prevent connection problems.

Do I need to call Xfinity to register my modem, or can I do it online?

You can do it either way. The Xfinity My Account app is faster if you have your MAC address handy. Calling 1-800-934-6489 takes longer but the representative can troubleshoot if something goes wrong during registration.

How long does it take for the modem to show up on my Xfinity account after I register it?

Registration is usually when ready in the app or within a few minutes over the phone. If you registered online and the modem does not appear in your account after 10 minutes, restart the modem by unplugging it for 30 seconds, then check your account again.

What should I do with my old modem?

If your old modem is an Xfinity-owned device, you can return it to an Xfinity store or mail it back using a prepaid label. If you own it, you can recycle it at an electronics recycling center or donate it if it still works. Do not throw it in the trash — modems contain materials that should be recycled.