Access the modem login page through your browser

To log into your Comcast modem, open any web browser on a device connected to your network and type 192.168.0.1 into the address bar, then press Enter. This IP address takes you directly to your modem's admin panel. If that address does not work, try 192.168.100.1 — some Comcast modems use this alternate address instead.

Make sure you are connected to your modem's network, either by WiFi or ethernet cable. If you are using a phone or tablet, connect to your home WiFi network first. You should see a login screen with fields for username and password. The page typically loads within a few seconds, though it may take longer on slower connections.

Enter the default username and password

The default username for most Comcast modems is admin and the default password is also admin. Type these into the login fields and click the login button. If these credentials do not work, check the sticker on the back or bottom of your modem — Comcast sometimes prints custom login information there, especially if a technician set up your account.

If you changed the password after you first set up the modem and cannot remember it, you will need to reset the modem to factory settings. This erases all custom settings, so use this only as a last resort. Write down any custom WiFi password or other settings you have created before you reset, so you can reconfigure them afterward.

Key Takeaways

  • Type 192.168.0.1 into your browser address bar to reach the modem login page, or try 192.168.100.1 if that does not work.
  • The default username and password are both admin on most Comcast modems, though your modem's sticker may show different credentials.
  • You must be connected to your modem's network — either by WiFi or ethernet — before you can access the admin panel.
  • If you forgot a custom password you created, resetting the modem to factory settings is the only way to regain access, but this erases your settings.
  • A factory reset takes about five minutes and returns the login credentials to the default admin and admin.

What you can do once you are logged in

The admin panel shows you information about your modem's status, including your internet speed, the devices connected to your network, and your WiFi network name and password. You can also restart the modem from here, which is often the fastest way to fix connection problems without unplugging it manually.

From the admin panel you can change your WiFi password, adjust security settings, and view logs of network activity. Most homeowners only need to restart the modem or check which devices are connected, so you do not need to change anything else unless you have a specific reason. The panel layout varies slightly between modem models, but the restart button and network status are always straightforward to find.

Reset the modem to factory settings if you cannot log in

If the default username and password do not work and you cannot find custom credentials on your modem's sticker, you can reset the modem to its original factory state. Locate the small reset button on the back of the modem — it is usually recessed so you cannot press it by accident. Some modems have the reset button on the bottom instead, so check both locations.

Use a straightened paperclip or a pen to press and hold the reset button for 10 to 15 seconds while the modem is powered on. The lights on the front will blink and the modem will restart. Once it finishes restarting, which takes about three to five minutes, the username and password will be back to admin and admin. Be aware that this erases any custom WiFi password or other settings you created, so you will need to set those up again after you log back in.

When to call Comcast instead of troubleshooting yourself

If you cannot reach the login page even after trying both IP addresses, or if the modem does not restart after a factory reset, contact Comcast support. They can walk you through additional troubleshooting steps or send a technician if the modem itself is faulty. Have your account number and modem model number ready when you call.

You should also call Comcast if you need help changing specific settings in the admin panel — for example, if you want to adjust parental controls or set up port forwarding. Support can guide you through these more advanced tasks and may support you do not accidentally disable something important.

Frequently Asked Questions

Why does 192.168.0.1 not work on my device?

Make sure you are connected to your modem's WiFi network or plugged in with an ethernet cable. If you are on a different network — like a guest WiFi or a phone's hotspot — you cannot reach the modem's admin panel. Also check that you typed the address correctly in the browser's address bar, not in a search engine.

Can I log in from outside my home?

No. The IP address 192.168.0.1 only works when you are connected to your modem's network. You cannot access the admin panel from a coffee shop or another location unless you set up remote access, which Comcast does not enable by default for security reasons.

What happens if I reset the modem but still cannot log in?

If the default credentials do not work even after a factory reset, the modem may have a hardware problem. Contact Comcast support with your account information and modem model number — they can troubleshoot further or arrange a replacement.

Is it safe to change settings in the admin panel?

Most settings are safe to explore, but avoid changing anything unless you know what it does. Restarting the modem is always safe. If you change a setting and something stops working, you can always reset the modem again to restore the defaults.

Do I need to log in to restart my modem?

No. You can unplug the modem for 30 seconds and plug it back in to restart it without logging in. However, logging in and using the restart button in the admin panel is cleaner and does not interrupt your connection as abruptly.