Find Your Modem's IP Address and Default Login

To log into your modem, you need two pieces of information: the modem's IP address (usually printed on a sticker on the device itself) and the default username and password (also on that sticker, or in your modem's manual). The IP address is typically 192.168.0.1 or 192.168.100.1, but check your specific modem first—different manufacturers use different addresses.

Look at the back or bottom of your modem for a label. It will show the IP address, username, and password. Write these down before you start. If you cannot find the label or it is worn away, check the modem's manual or search online for "[your modem model] default login"—for example, "Netgear Nighthawk default login" or "Arris SB6121 default login".

If you have already changed the password from the factory default and cannot remember it, you will need to reset the modem to factory settings. Most modems have a small reset button on the back that you hold down for 10 to 15 seconds with a paperclip or pen. This erases all your custom settings and returns the modem to its original state, so use this only as a last resort.

Key Takeaways

  • Your modem's IP address and default login credentials are printed on a label attached to the device itself.
  • Open a web browser, type the IP address into the address bar, and press Enter to reach the login page.
  • Enter the username and password from the label, then click the login button to access the admin panel.
  • If you changed the password and forgot it, press and hold the reset button on the back of the modem for 10 to 15 seconds to restore factory defaults.
  • Once logged in, you can change your Wi-Fi password, restart the modem, or check connection status—but avoid changing advanced settings unless you know what they do.

Open a Web Browser and Enter the IP Address

On any computer or phone connected to your modem's network, open a web browser—Chrome, Firefox, Safari, or Edge all work. In the address bar at the top (where you normally type a website URL), type the modem's IP address exactly as it appears on the label. Do not type it into a search engine; type it directly into the address bar.

Press Enter. The browser will load a login page. This page is hosted by your modem itself, not by an external website, so it works even if your internet connection is down. The page will ask for a username and password. If nothing appears after 10 seconds, try the other common IP address (if the label shows 192.168.0.1, try 192.168.100.1 instead).

Enter Your Username and Password

Type the username from the modem's label into the first field. Then type the password into the second field. Both are case-sensitive, so match the capitalization exactly as printed. The default username is often admin and the default password is often admin or password, but this varies by manufacturer—do not guess.

Click the Login or Sign In button. If you see an error message saying the credentials are wrong, double-check that you typed them correctly, including capital letters. If the credentials still do not work, the password may have been changed by a previous user or technician. In that case, you will need to reset the modem to factory settings using the reset button.

What You Will See After Login

Once you log in, you will see the modem's admin panel—a dashboard with tabs or menu options. Common sections include Status (showing your internet connection, signal strength, and IP address), Wi-Fi or Wireless (where you can change your network name and password), and Advanced (for technical settings you should not change unless you have a specific reason).

The layout and options differ depending on your modem model. Most people only need to visit the Wi-Fi section to change their network password or restart the modem. The Status page is useful for checking whether your connection is stable or troubleshooting if your internet is slow. Leave other sections alone unless you are following specific instructions from your internet provider or a technician.

Common Tasks After Logging In

The most common reason to log in is to change your Wi-Fi password. Look for a Wi-Fi, Wireless, or Network section. You will see a field for the network name (SSID) and password. Change the password to something you can remember, then click Save or explore. Your modem will restart, and all devices will disconnect temporarily. You will need to reconnect using the new password.

Another common task is to restart the modem. Look for a Restart or Reboot button, usually in the Status or System section. Restarting takes 30 seconds to 2 minutes and can fix slow speeds or dropped connections. You can also unplug the modem for 30 seconds and plug it back in—this achieves the same result without logging in.

If you need to check your connection status, go to the Status page. You will see information like your downstream and upstream speeds, signal levels, and the number of connected devices. If speeds are much lower than what your internet plan promises, this information is useful to share with your internet provider's support team.

Troubleshooting Login Problems

If the login page does not load, first check that your computer or phone is connected to the modem's Wi-Fi network. You can be connected to the Wi-Fi but still unable to reach the admin panel if your device is not on the same network as the modem. Look at your Wi-Fi networks list and make sure you are connected to the correct one.

If you are connected to Wi-Fi but the page still will not load, try a different IP address. Some modems respond to 192.168.0.1, others to 192.168.100.1, and some to 10.0.0.1. If none of these work, restart your computer or phone and try again. If the page loads but the login fails, make sure you are typing the credentials exactly as printed on the label, including uppercase and lowercase letters.

If you have tried everything and still cannot log in, reset the modem to factory settings. Locate the small reset button on the back of the modem (it may be recessed inside a hole). Use a paperclip or the tip of a pen to press and hold it for 10 to 15 seconds while the modem is powered on. The lights will blink and the modem will restart. Once it finishes restarting, try logging in again with the default credentials from the label.

Frequently Asked Questions

What if I cannot find the IP address on my modem's label?

Search online for your modem's model number (printed on the label) plus "default IP address." For example, search "TP-Link Archer C7 default IP address." You can also try the three most common addresses: 192.168.0.1, 192.168.100.1, and 10.0.0.1. One of these will work for almost all home modems.

Can I log in from my phone?

Yes. Open a web browser on your phone, make sure it is connected to your modem's Wi-Fi network, and type the IP address into the address bar. The login page will look slightly different on a phone, but the process is the same. Some modems also have a mobile app, but the web browser method works on any phone.

Is it safe to change settings in the admin panel?

Changing your Wi-Fi password and restarting the modem are safe. Avoid changing anything in the Advanced or System sections unless you are following specific instructions from your internet provider or a technician. Changing DNS settings, port forwarding, or firewall rules can break your internet connection if done incorrectly.

What happens if I reset the modem?

Resetting erases all custom settings and returns the modem to factory defaults. Your Wi-Fi password will revert to the default, all devices will disconnect, and you will need to reconnect using the original password. Your internet connection itself will not be affected—your provider's settings are stored on their end, not on your modem.

Do I need to log in regularly?

No. Most people log in once to change the Wi-Fi password and then never again. You only need to log in if you want to change settings, check your connection status, or restart the modem. Restarting can also be done by unplugging the modem for 30 seconds without logging in.