Access Your Modem's Settings Page

To log into your Comcast modem, open a web browser on any device connected to your network and type 192.168.0.1 or 192.168.100.1 into the address bar. Press Enter. You should see a login page with fields for username and password.

If neither address works, check the sticker on the back or bottom of your modem — it will list the correct IP address for your specific model. The address is usually printed near the serial number and MAC address.

Make sure you are connected to your Comcast network, either by Wi-Fi or an ethernet cable plugged directly into the modem. You cannot reach the login page from a different network.

Key Takeaways

  • The default login address is usually 192.168.0.1 or 192.168.100.1, but check your modem's label if neither works.
  • The default username is typically "admin" and the default password is "motorola" or "comcast" — check your modem's sticker for the exact credentials.
  • You must be connected to your Comcast network to reach the login page.
  • If you changed the password and cannot remember it, you can reset the modem to factory settings, which will erase your custom password and restore the default one.

Default Username and Password

Most Comcast modems use "admin" as the default username. The default password varies by modem model but is commonly "motorola" or "comcast". Check the label on your modem to confirm the exact credentials for your model.

If you have changed the password since installation and no longer remember it, you will need to reset the modem. This erases your custom password and restores the factory defaults, allowing you to log in again with the original credentials.

What to Do If You Cannot Remember Your Password

If you changed your modem password and cannot recall it, you can perform a factory reset. Locate the small reset button on the back of your modem — it is usually recessed so you cannot press it by accident. Use a straightened paperclip or a similar thin object to press and hold the button for 10 to 15 seconds while the modem is powered on.

The modem will restart and return to its factory settings. This means your custom password is erased and the default password is restored. You can now log in using the default username and password printed on your modem's label. Be aware that resetting also clears any other custom settings you may have configured.

After you log back in, you can change the password again if you wish. Write down the new password in a safe place so you do not lose it.

Navigating the Modem Settings Page

Once you are logged in, you will see a dashboard or home page with several tabs or menu options. Common sections include Status (showing your connection and signal strength), Advanced (for Wi-Fi settings and security), and Restart (to reboot the modem).

The exact layout depends on your modem model. Most Comcast modems display your internet speed, connected devices, and Wi-Fi network name on the main page. If you need to change your Wi-Fi password or name, look for a Wi-Fi or Wireless section in the menu.

Do not change settings unless you know what they do. Incorrect changes can disconnect your internet or create security problems. If you make a mistake, you can always reset the modem again to restore defaults.

Common Reasons You Cannot Log In

If you type the correct address and password but still cannot log in, first check that you are connected to your Comcast network. If you are on a guest network or a different Wi-Fi, you cannot reach the modem settings. Disconnect and reconnect to your main Comcast network.

If you are connected to the right network and the login still fails, try clearing your browser's cache and cookies, then reload the page. Sometimes old data stored in your browser prevents the login page from loading correctly. You can also try a different browser or device to rule out a browser-specific problem.

If the page does not load at all, restart your modem by unplugging it for 30 seconds, then plugging it back in. Wait two to three minutes for it to fully boot up, then try again. If you still cannot reach the login page, contact Comcast support — there may be a hardware issue with your modem.

When to Call Comcast Support

If you have tried the default username and password, reset the modem, and attempted to log in from multiple devices without success, contact Comcast. You may have a modem that requires a different login process, or there may be a technical fault preventing access to the settings page.

Comcast support can also help if you need to change settings that are not visible in your modem's interface, or if you have questions about your specific modem model. Have your account number and modem serial number ready when you call.

Frequently Asked Questions

What is the difference between 192.168.0.1 and 192.168.100.1?

Different Comcast modem models use different IP addresses for their settings page. Both are common defaults. Check the label on your modem to see which one applies to your model. If you are unsure, try both — one will work and one will not.

Can I log into my modem from outside my home network?

No. You must be connected to your Comcast network — either by Wi-Fi or ethernet cable — to reach the modem settings page. This is a security feature that prevents strangers from accessing your modem remotely.

Will resetting my modem delete my internet history or personal files?

No. Resetting the modem only erases the modem's own settings, such as your custom Wi-Fi password and network name. It does not affect files on your computer, phone, or other devices. Your internet history and personal data remain unchanged.

What should I do if I see an error message when I try to log in?

Common errors include "incorrect password" (try the default password from your modem's label) and "page cannot be reached" (make sure you are on your Comcast network and try restarting the modem). If the error persists after a restart, contact Comcast support.