Access your modem's settings through a web browser
To log into your modem, open any web browser on a device connected to your network and type your modem's IP address into the address bar. The most common address is 192.168.0.1 or 192.168.100.1. When you press Enter, a login page should appear asking for a username and password.
If neither of those addresses works, check the sticker on the back or bottom of your modem — it will list the correct IP address, username, and default password. You can also find this information in your modem's manual or on the manufacturer's website by searching for your modem model number.
Once you reach the login page, enter the default username and password from your modem's label. The most common defaults are username admin with password admin, or username admin with password password, but this varies by manufacturer. After you log in, you will see your modem's settings dashboard.
Key Takeaways
- Type your modem's IP address (usually 192.168.0.1 or 192.168.100.1) into a web browser address bar to reach the login page.
- The default username and password are printed on a sticker attached to your modem, so check there first if you do not remember them.
- If you changed the password after setup and cannot remember it, you can reset the modem to factory defaults by holding the reset button for 10 to 15 seconds.
- Once logged in, avoid changing settings unless you know what they do, as incorrect changes can disconnect your internet.
Finding your modem's IP address if you do not have the label
If the sticker on your modem is worn away or missing, you can find the IP address through your computer's network settings. On Windows, open Command Prompt and type ipconfig, then press Enter. Look for the line that says "Default Gateway" — that number is your modem's IP address.
On a Mac, go to System Preferences, select Network, click Advanced, and then click the TCP/IP tab. The "Router" field shows your modem's IP address. Once you have the address, type it into your browser's address bar just as you would a website.
What to do if the default password does not work
If you changed the admin password after you first set up your modem and cannot remember it, the only way to regain access is to reset the modem to its factory settings. Locate the small reset button on the back of your modem — it is usually recessed so you cannot press it by accident.
Use a straightened paperclip or a pen tip to press and hold the reset button for 10 to 15 seconds while the modem is powered on. The lights on the front will blink, and the modem will restart. Once it finishes restarting, the username and password will be back to the factory defaults printed on the label. Be aware that resetting erases any custom settings you made, including WiFi network names and passwords you may have created.
Logging in on a phone or tablet
You can log into your modem from a phone or tablet the same way you would from a computer. Open Safari, Chrome, or your default browser, type the modem's IP address into the address bar, and enter your login credentials when prompted.
If you are using a phone connected to your modem's WiFi network, the login should work without any extra steps. If you are using mobile data instead of WiFi, you will not be able to reach your modem's login page — you must be connected to the modem's network to access its settings.
Common reasons the login page will not load
If you type the IP address and nothing appears, first check that you are connected to your modem's WiFi network or plugged in with an ethernet cable. You cannot reach the modem's settings if you are not on its network. If you are connected and still see an error, try a different IP address — some modems use 192.168.1.1 instead of the more common addresses.
If you have tried multiple addresses and none of them work, restart your modem by unplugging it for 30 seconds, then plugging it back in. Wait two to three minutes for it to fully restart before trying again. If the page still will not load after a restart, your modem may have a hardware problem, and you may need to contact your internet service provider or replace the modem.
Protecting your modem after you log in
Once you have successfully logged in, consider changing the default password to something only you know. Look for a section labeled "Administration," "Settings," or "Security" in the dashboard. This prevents anyone else on your network from accessing your modem's settings and making unwanted changes.
Write down your new password in a safe place, or use a password manager to store it. If you forget it again, you will have to reset the modem to factory defaults, which will erase any custom settings you have made.
Frequently Asked Questions
Why do I need to log into my modem?
You log in to change settings like your WiFi network name and password, restart the modem, check your internet connection status, or update the modem's software. Most people do not need to log in often — usually only when they first set up the modem or when they want to change their WiFi password.
Is it safe to change settings in the modem dashboard?
Most settings are safe to change, but some can break your internet connection if you do not know what they do. Stick to changing your WiFi name and password, which are usually in a section labeled "Wireless" or "WiFi." Avoid changing settings in sections labeled "WAN," "LAN," or "Advanced" unless you know exactly what you are doing.
What if I forgot my WiFi password but remember my modem login?
Log into your modem and look for a section labeled "Wireless," "WiFi," or "Network." You should see your current WiFi network name and password listed there. You can also change the password to something new from this same screen.
Can I log into my modem from outside my house?
No, you cannot reach your modem's login page from outside your home network using the IP address method. You must be connected to your modem's WiFi or plugged in with an ethernet cable. Some modems have a remote management feature, but it is usually turned off by default for security reasons.
What happens if I reset my modem to factory defaults?
Resetting erases all custom settings, including any WiFi network name and password you created. Your modem will go back to its original factory settings, and you will need to set up your WiFi network again from scratch. Your internet service provider's settings will remain intact, so your internet connection should work once the modem restarts.