Finding Your Router's Login Page

To log into your Comcast router, open a web browser on any device connected to your network and type 192.168.0.1 into the address bar, then press Enter. This is the standard IP address for most Comcast routers. Your browser will load a login page with fields for a username and password.

If that address does not work, try 192.168.100.1 instead — some Comcast models use this alternate address. You can also check the back or bottom of your router for a sticker that lists the correct login address, along with your default username and password printed there.

Make sure you are connected to your Comcast network, either by Wi-Fi or an ethernet cable plugged directly into the router. You cannot reach the login page if your device is not on the network.

Key Takeaways

  • The standard login address for Comcast routers is 192.168.0.1, entered into your browser's address bar like a website.
  • Your default username and password are usually printed on a sticker on the back or bottom of the router itself.
  • You must be connected to your Comcast network — either by Wi-Fi or ethernet — before you can reach the login page.
  • If you changed your password and cannot remember it, you can reset the router to factory settings by holding the reset button for 10 to 15 seconds.
  • After logging in, change your default password to something only you know to prevent unauthorized access to your network settings.

Entering Your Username and Password

When the login page loads, you will see two fields. The default username for most Comcast routers is admin, and the default password is also admin. Type these into the fields and click the login button.

If those credentials do not work, check the sticker on your router again — some models use different defaults. Common alternatives include username cusadmin with password highspeed, or username admin with password motorola (if your router is a Motorola model). The sticker will tell you which combination your specific router uses.

After you log in successfully, you will see your router's control panel, where you can change Wi-Fi settings, restart the device, check connected devices, and adjust other network options.

What to Do If You Cannot Remember Your Password

If you changed your password after the initial setup and cannot remember it now, the only way to regain access is to reset your router to its factory settings. This erases all your custom settings and returns the router to how it came from Comcast.

To reset the router, locate the small reset button on the back or bottom of the device — it is usually recessed so you cannot press it by accident. Use a paperclip or the tip of a pen to hold down the reset button for 10 to 15 seconds while the router is powered on. The lights on the front will blink, and the router will restart. Once it finishes restarting, the default username and password printed on the sticker will work again.

After you log back in with the default credentials, change the password when ready to something you will remember. Write it down in a safe place, or use a password manager to store it.

Changing Your Wi-Fi Password and Network Name

Once you are logged in, you can change your Wi-Fi network name (called the SSID) and password. Look for a section labeled Wireless, Wi-Fi Settings, or Network in the control panel — the exact name varies by router model.

In that section, you will see a field for the network name and another for the password. Change the network name to something you recognize, and create a strong password that is at least 12 characters long and includes uppercase letters, lowercase letters, numbers, and symbols. Click Save or explore, and the router will restart with your new settings.

All devices currently connected to your Wi-Fi will be disconnected during the restart. You will need to reconnect them using your new password once the router finishes restarting, which usually takes two to three minutes.

Restarting Your Router From the Control Panel

If your internet is slow or you are having connection problems, you can restart the router from the login page without unplugging it. Look for a button or link labeled Restart, Reboot, or System Restart in the control panel.

Click that button and confirm when the router asks you to verify. The restart will take two to three minutes. During that time, your internet will be offline. Once the lights on the front of the router stop blinking and settle into their normal pattern, your connection should be back online.

Checking Which Devices Are Connected to Your Network

From the control panel, you can see a list of all devices currently connected to your Wi-Fi. Look for a section called Connected Devices, Device List, or DHCP Clients. This list shows the name of each device and its IP address on your network.

If you see a device you do not recognize, that means someone else has connected to your Wi-Fi. You can remove them by selecting the device and clicking a Remove or Disconnect button. After that, they will need your Wi-Fi password to reconnect.

Frequently Asked Questions

What if 192.168.0.1 does not load in my browser?

Make sure you are connected to your Comcast network and that you typed the address correctly in the address bar — not in a search box. If it still does not load, try 192.168.100.1 instead. If neither works, restart your router by unplugging it for 30 seconds, then plugging it back in.

Can I log in from a device not connected to my Wi-Fi?

No. You must be connected to your Comcast network — either by Wi-Fi or an ethernet cable — to reach the login page. Devices outside your network cannot access the router's control panel for security reasons.

What happens if I reset my router?

Resetting erases all your custom settings and returns the router to factory defaults. Your Wi-Fi network name and password will revert to the defaults printed on the sticker. You will need to reconnect all your devices and reconfigure any custom settings you had made.

Is it safe to change my router password?

Yes, and it is strongly recommended. The default password is printed on thousands of routers, so changing it prevents neighbors or others from accessing your network settings. Choose a password you can remember, or store it in a password manager.

Why does my router keep disconnecting me?

Try restarting the router from the control panel first. If disconnections continue, check that your router is in a central location away from walls and metal objects, and that no other devices are using the same Wi-Fi channel. You can change the channel in the Wireless settings section of the control panel.