Access your Xfinity modem settings through the admin panel

To log into your Xfinity modem, open a web browser on any device connected to your network and go to 10.0.0.1 or 192.168.0.1 in the address bar. The first address works for most Xfinity modems; the second is a backup if the first does not load. You will see a login screen asking for a username and password.

The default username is admin and the default password is motorola (or sometimes admin, depending on your modem model). If neither works, check the sticker on the back or bottom of your modem — Comcast prints the credentials there. Once you enter the correct username and password, you will land on the admin dashboard where you can view connection status, restart the modem, check your IP address, and adjust WiFi settings.

If you changed the password in the past and cannot remember it, you will need to factory reset the modem by holding the reset button on the back for 10 to 15 seconds. This erases all custom settings and returns the modem to factory defaults, including the original password.

Key Takeaways

  • Type 10.0.0.1 into your browser address bar to reach the Xfinity modem login page from any device on your network.
  • The default username is admin and the default password is motorola, printed on a sticker attached to your modem if you need to confirm.
  • If you changed the password and forgot it, hold the reset button for 10 to 15 seconds to restore factory defaults and regain access.
  • Once logged in, you can restart the modem, check connection status, and change WiFi settings without calling Comcast support.

What you can do once you are logged in

The admin panel shows your modem's current status at a glance. You will see whether the device is connected to the internet, what your public IP address is, and the signal strength from Comcast's network. This information is useful when troubleshooting connection problems or when you need to provide details to your internet service provider.

From the dashboard, you can restart the modem without unplugging it — a step that fixes many temporary connection issues. Look for a "Restart" or "Reboot" button, usually on the main status page or under a "Tools" or "Administration" menu. The restart takes about two to three minutes, during which your internet will be offline.

You can also view and change your WiFi network name (SSID) and password from the admin panel. This is where you go if you want to rename your network, strengthen your security by changing the password, or switch between 2.4 GHz and 5 GHz bands. Some Xfinity modems let you create a separate guest network from this same menu.

Troubleshooting login problems

If the address 10.0.0.1 does not load, try 192.168.0.1 instead. If neither works, make sure your device is actually connected to your Xfinity WiFi network — you cannot reach the admin panel over a different network or over mobile data. Check the WiFi icon on your device and confirm you are on your home network.

If you are connected but the page still will not load, try clearing your browser's cache and cookies, then reload the page. If that does not work, restart your modem by unplugging it for 30 seconds, plugging it back in, and waiting for all lights to stabilize before trying again.

If the login screen appears but your username and password do not work, double-check the credentials on the modem's label. Comcast sometimes ships modems with non-standard passwords. If the label is missing or unreadable, a factory reset is your only option to regain access.

When to contact Comcast instead of using the admin panel

The admin panel is useful for routine checks and WiFi changes, but some problems require Comcast support. If your modem shows no internet connection despite being powered on and all lights being stable, contact Comcast — the issue is likely on their network, not your device. If you are having slow speeds, frequent disconnections, or cannot connect to the internet at all, Comcast can run diagnostics from their end and may replace your modem if it is faulty.

You should also call Comcast if you need to change your service plan, add a phone line, or troubleshoot issues that started after a service outage. The admin panel shows you the modem's status but cannot fix problems upstream on Comcast's network.

Keeping your modem find

Change your modem's default password as soon as you log in for the first time. Anyone on your WiFi network can reach the admin panel at 10.0.0.1, so a weak or default password means they could change your WiFi settings or restart your modem. Look for a "Change Password" or "Administration" section in the admin panel and set a password only you know.

Do not share your modem's admin password with guests or family members who do not need to change network settings. If someone else needs to connect to your WiFi, give them the WiFi password instead — that is different from the admin password and does not grant access to the modem's settings.

Frequently Asked Questions

What is the difference between my WiFi password and my modem admin password?

Your WiFi password is what guests and devices use to connect to your network. Your modem admin password protects the settings panel at 10.0.0.1. They are separate — you can change one without changing the other. Keep the admin password private and share only the WiFi password with people who need internet access.

Will restarting my modem disconnect my devices?

Yes. When you restart the modem from the admin panel, your internet goes offline for two to three minutes while the modem reboots. All connected devices will lose their connection and will need to reconnect once the modem is back online. Restart during a time when you are not using the internet.

Can I log into my modem from outside my home?

No. The admin panel is only reachable from devices on your home network. You cannot access 10.0.0.1 from a phone on mobile data or from a computer outside your house. This is a security feature — it prevents strangers from reaching your modem settings.

What should I do if I factory reset my modem by accident?

Your modem will restart and return to factory settings. You can log back in using the default username (admin) and password (motorola). Your WiFi network name will reset to the default, and any custom settings you made will be erased. You will need to reconfigure your WiFi password and any other changes you had made.

Is it safe to change settings in the admin panel?

Most settings in the admin panel are safe to change — WiFi name, WiFi password, and restart are common tasks. Avoid changing advanced settings like DNS, DHCP, or port forwarding unless you know what you are doing. When in doubt, leave a setting alone or contact Comcast support before making changes.