Access Your Modem's Settings Page

To log into your Comcast modem, open a web browser on any device connected to your network and type 192.168.0.1 into the address bar. This IP address takes you directly to your modem's settings page. Press Enter, and the login screen should appear within a few seconds.

If that address does not work, try 192.168.100.1 instead — some Comcast modems use this alternate address. You can also try typing mygateway.local in the address bar, which works on many newer models. If none of these work, check the sticker on the back or bottom of your modem for the correct address.

Make sure you are connected to your own network before attempting login. If you are on a guest network or a different Wi-Fi, the modem settings page will not load. Wired connections (using an ethernet cable) are more reliable than Wi-Fi for this task.

Key Takeaways

  • Type 192.168.0.1 into your browser's address bar to reach your Comcast modem's login page.
  • The default username is usually admin and the default password is motorola or comcast, depending on your modem model.
  • If you changed the password and cannot remember it, you can reset the modem to factory settings by holding the reset button for 10 to 15 seconds, which erases your custom settings.
  • Once logged in, you can check your internet speed, restart the modem, and view connected devices, but most users do not need to change settings regularly.

Enter Your Username and Password

When the login page loads, you will see two fields: one for username and one for password. The default username for most Comcast modems is admin. The default password varies by modem model — it is usually either motorola or comcast, written in lowercase.

Type both carefully, paying attention to capitalization. Passwords are case-sensitive, so Motorola and motorola are different. If neither default password works, check the label on your modem itself — many models print the credentials directly on a sticker.

If you previously changed the password and have forgotten it, you will need to reset the modem. This erases all custom settings and returns the modem to its original state, so use this only as a last resort.

Reset Your Modem If You Cannot Log In

Locate the small reset button on the back or bottom of your modem — it is usually recessed so you cannot press it by accident. Using a straightened paperclip or a pen tip, press and hold the button for 10 to 15 seconds while the modem is powered on. The lights on the front will blink, and the modem will restart.

Wait three to five minutes for the modem to fully restart and reconnect to the internet. Once it is back online, try logging in again with the default username admin and the default password for your model. The reset erases any custom password you set, so you will be back to the factory defaults.

Be aware that resetting the modem also erases any custom network names or settings you configured. Your internet connection will work normally, but you may need to reconnect devices to your Wi-Fi network if you had changed the network name or password.

What You Can Do Once You Are Logged In

The modem settings page shows several useful pieces of information without requiring you to change anything. You can see your current internet speed, the status of your connection, and a list of all devices currently connected to your network. This information helps you troubleshoot connection problems or identify unexpected devices on your network.

Most users do not need to change settings in the modem itself. Internet speed, channel selection, and security settings are usually managed by Comcast remotely. If a technician asks you to change a specific setting, they will walk you through the steps. Changing settings without guidance can cause connection problems.

The one setting you might adjust is your Wi-Fi password, which you can change from the settings page. This is safer than leaving the default password, especially if you have guests or neighbors who might know the standard Comcast defaults.

Common Reasons the Login Page Will Not Load

If the login page does not appear after typing the IP address, first check that you are connected to your own Wi-Fi network or plugged in with an ethernet cable. Devices on a guest network or a different network cannot reach the modem settings page. Disconnect from any VPN software you might be running, as VPNs can block access to local network devices.

Try refreshing the page by pressing F5 or Ctrl+R (Cmd+R on Mac). If the page still does not load, restart your modem by unplugging it for 30 seconds, then plugging it back in. Wait for all the lights to stabilize before trying again — this usually takes two to three minutes.

If you are still unable to reach the login page after these steps, the modem itself may have a hardware problem. Contact Comcast support with the model number from your modem's label, and they can help diagnose the issue or arrange a replacement.

Protect Your Modem Login Information

Once you successfully log in, consider changing the default password to something only you know. This prevents anyone else on your network from accessing modem settings and making changes that could disrupt your internet. Use a password that is at least 8 characters long and includes a mix of letters and numbers.

Do not share your modem login credentials with anyone except a Comcast technician who is actively helping you troubleshoot a problem. Technicians will ask for access if they need it, and they have find ways to verify their identity before you provide credentials.

If you suspect someone has accessed your modem settings without permission, reset the modem to factory defaults and change the password when ready. This closes any unauthorized access and restores your network security.

Frequently Asked Questions

What if I type the IP address and get a blank page or error message?

Make sure you typed the address correctly — it is 192.168.0.1 with periods between each set of numbers, not dashes or slashes. Check that you are connected to your own network, not a guest network. If you are still seeing an error, try the alternate address 192.168.100.1 or restart your modem and try again after it fully boots up.

Can I log in from my phone or tablet?

Yes, as long as your phone or tablet is connected to your modem's Wi-Fi network. Open any web browser, type the IP address into the address bar, and proceed with login. The process is identical to using a computer.

What happens if I forget my custom password after changing it?

You will need to reset the modem to factory settings by holding the reset button for 10 to 15 seconds. This returns the password to the default, but it also erases any other custom settings you made. After reset, log in with the default username and password, then change the password again to something you will remember.

Is it safe to change settings in the modem if I do not know what they do?

It is best to leave settings alone unless a technician specifically instructs you to change them. Changing the wrong setting can cause your internet to stop working or become unstable. If you accidentally change something, you can always reset the modem to restore the defaults.

Do I need to log in regularly to keep my modem working?

No. Once your modem is set up, it works on its own without requiring you to log in. You only need to log in if you want to check your connection status, change your Wi-Fi password, or troubleshoot a problem.