Access Your Modem's Admin Panel Through Your Browser

To log in to your Comcast modem, open any web browser on a device connected to your network and type 192.168.0.1 or 192.168.100.1 into the address bar. Press Enter. You should see a login page with fields for username and password.

The default username for most Comcast modems is admin, and the default password is also admin. If those credentials do not work, check the sticker on the back or bottom of your modem — Comcast sometimes prints custom login information there. Some newer models use motorola as the username instead.

If you changed the password in the past and cannot remember it, you will need to reset the modem to factory settings. This erases all custom settings, so use it only as a last resort.

Key Takeaways

  • Type 192.168.0.1 or 192.168.100.1 into your browser's address bar to reach the login page.
  • The default username and password are both admin on most Comcast modems, though your modem's label may show different credentials.
  • Your device must be connected to the modem's network — either by ethernet cable or Wi-Fi — to reach the login page.
  • If you forget a password you set yourself, a factory reset is the only way to regain access, and it will erase your custom settings.

What to Do If the IP Address Does Not Work

If typing 192.168.0.1 into your browser leads nowhere, try the alternate address 192.168.100.1. Comcast uses both depending on the modem model. If neither works, your device may not be connected to the modem's network.

Check that you are connected to your modem's Wi-Fi network by name (the SSID), not a neighbor's network. If you are using ethernet, make sure the cable is plugged firmly into both the modem and your computer. You can also try restarting your browser or clearing your browser cache, then attempting the login again.

If you still cannot reach the page, restart the modem by unplugging it for 30 seconds, then plugging it back in. Wait two to three minutes for it to fully boot before trying again.

Understanding What You Can Change in the Admin Panel

Once logged in, you will see options to change your Wi-Fi network name and password, restart the modem, check connection status, and view device information. Most homeowners only need to change the Wi-Fi password or restart the modem when the connection drops.

Do not change settings like DNS, IP address range, or firewall rules unless you know what you are doing — incorrect changes can disconnect you from the internet entirely. If you make a change and lose your connection, you can always reset the modem to factory settings and start over.

Resetting Your Modem to Factory Settings

If you cannot log in because you forgot a custom password, locate the small reset button on the back of the modem. Use a paperclip or pen to press and hold it for 10 to 15 seconds while the modem is powered on. The lights will blink, and the modem will restart.

After the reset completes, the modem will return to its default username and password (usually both admin). You will lose any custom Wi-Fi names, passwords, or other settings you had configured. Your internet connection itself will still work once the modem finishes restarting.

When to Call Comcast Instead of Logging In Yourself

If you cannot reach the login page after trying both IP addresses and restarting the modem, or if the modem lights suggest a connection problem with your internet service, contact Comcast directly. A technician can check whether the issue is with the modem hardware or with your account and service.

You should also call Comcast if you need to change settings related to your internet service itself — such as your service tier or account details. The modem's admin panel only controls the device itself, not your Comcast account.

Securing Your Modem After Login

Once you log in, change the default password from admin to something only you know. This prevents anyone else on your network from accessing the modem settings and potentially changing your Wi-Fi password or other configurations.

Write down your new password in a safe place, or use a password manager to store it. If you forget it again, you can always reset the modem, but that will also erase any other custom settings you have made.

Frequently Asked Questions

Why does my browser say the connection is not find when I log in?

The modem's admin panel uses an older, unencrypted connection method. This is normal and expected — the warning does not mean your modem is broken or hacked. You can proceed to the login page safely.

Can I log in to my modem from outside my home?

No. You must be connected to your modem's network (either by Wi-Fi or ethernet cable) to reach the login page. You cannot access it from a coffee shop or another location unless you use a VPN connected to your home network.

What if I see a blank page after entering the IP address?

Wait 10 to 15 seconds for the page to load — older modems can be slow. If it remains blank, try refreshing the page or clearing your browser cache. If that does not work, restart your modem and try again after it finishes booting.

Do I need to log in to my modem to use the internet?

No. The modem works without you ever logging in. You only need to access the admin panel if you want to change your Wi-Fi password, restart the modem, or check its status.