Access Your Xfinity Modem's Admin Panel
To log in to your Xfinity modem, open a web browser on any device connected to your network and type 10.0.0.1 into the address bar. Press Enter. A login page will appear asking for a username and password. The default username is admin and the default password is motorola (or admin if that does not work). After you enter both, click the login button.
If you changed your password after setup and cannot remember it, you will need to reset the modem to factory settings. This erases all your custom settings. Press and hold the small reset button on the back of the modem for 10 to 15 seconds until the lights blink. Wait two to three minutes for the modem to restart, then try logging in again with the default credentials.
Some Xfinity modems use 192.168.0.1 instead of 10.0.0.1. If the first address does not load, try the second one. You can also find the correct address printed on a sticker on the bottom or back of the modem.
Key Takeaways
- The default login address is 10.0.0.1, typed directly into your browser's address bar on any device on your network.
- Default username is admin and default password is motorola, though some modems use admin for both fields.
- If you forgot your custom password, hold the reset button for 10 to 15 seconds to restore factory defaults and use the default credentials again.
- Resetting the modem erases all custom settings, so only do this if you cannot remember your password.
- Some Xfinity modems respond to 192.168.0.1 instead; check the sticker on your modem if 10.0.0.1 does not work.
What You Can Do After Logging In
Once you are logged in, you can see your modem's status, restart it, check connected devices, and change your WiFi network name and password. The admin panel also shows your internet speed, signal levels, and any error messages. Most users log in only to restart the modem when their internet slows down or stops working.
Do not change settings like channel width, frequency band, or DNS unless you know what you are doing—wrong changes can make your internet slower or break your connection entirely. If you need to change your WiFi password, look for a section labeled WiFi, Wireless, or Network Settings.
Troubleshooting Login Problems
If the login page does not appear when you type 10.0.0.1, make sure your device is connected to your Xfinity WiFi network or plugged into the modem with an ethernet cable. You cannot reach the admin panel if you are on a different network. Check that you typed the address correctly—it is a zero, not the letter O.
If you see a login page but your username and password do not work, try admin for both fields, or motorola for the password with admin as the username. If neither combination works, the password was changed and you will need to reset the modem.
If the page loads very slowly or times out, restart your modem by unplugging it for 30 seconds, then plugging it back in. Wait for all lights to stabilize before trying to log in again. A modem that is overheating or malfunctioning may not load the admin panel at all.
Resetting Your Modem Safely
The reset button is a small, recessed hole on the back or bottom of the modem. You will need a straightened paperclip or a pen tip to reach it. Press and hold it for 10 to 15 seconds—do not just tap it. The lights will blink rapidly, which means the reset is happening. Release the button and wait two to three minutes for the modem to fully restart.
During a reset, your internet will go down completely. Do not unplug the modem while it is restarting, or you may damage it. After the lights stop blinking and return to normal, your modem is ready. Log in with the default credentials and set up your WiFi password again.
If you reset the modem and still cannot log in with the default password, the modem may have a hardware problem. Contact Xfinity support for help.
Changing Your WiFi Password from the Admin Panel
After logging in, look for a tab or menu item labeled WiFi, Wireless, or Network. Click it to see your current network name and password. You can change the password to anything you want—use something at least 12 characters long with a mix of letters, numbers, and symbols for security.
After you change the password and save it, all devices will be disconnected from your WiFi. You will need to reconnect each one using the new password. Write down the new password somewhere safe before you save the change, so you do not forget it.
When to Contact Xfinity Support
If you cannot log in after trying both default passwords and resetting the modem, or if the admin panel loads but shows error messages about your internet connection, contact Xfinity support. Have your account number and modem model number ready—both are on your bill and on the modem itself.
You should also reach out to support if your modem is very old, as older models may use different default passwords or addresses. Xfinity support can walk you through the login process for your specific modem model.
Frequently Asked Questions
What is the default password for my Xfinity modem?
The default password is motorola with the username admin. Some modems use admin for both the username and password. If neither works, your password was changed after setup and you will need to reset the modem to restore the defaults.
Can I log in to my modem from outside my home?
No. You must be connected to your Xfinity WiFi network or plugged into the modem with an ethernet cable to reach the admin panel. This is a security feature to prevent unauthorized access.
Will resetting my modem delete my internet service?
No. Resetting erases only the settings you changed, like your WiFi password. Your internet service stays active. After the reset, you will need to set up your WiFi password again, but your connection to Xfinity will work when ready.
What should I do if I forgot my WiFi password?
Log in to the modem admin panel and navigate to the WiFi or Wireless section to see your current password. If you cannot log in to the panel, reset the modem and log in with the default credentials, then check the WiFi settings.
Is it safe to change settings in the admin panel?
Most settings are safe to change, like your WiFi password and network name. Avoid changing technical settings like channel width, frequency band, or DNS unless you know what they do. Wrong changes can slow your internet or break your connection.