The basic login steps for your Xfinity router
To log into your Xfinity router, open a web browser on any device connected to your network and type 10.0.0.1 into the address bar, then press Enter. You will see a login page asking for a username and password. The default username is admin and the default password is motorola (or sometimes admin, depending on your router model). After you enter these credentials, click the login button.
If the default password does not work, check the sticker on the back or bottom of your router — Xfinity routers often have the login information printed there. Once you are logged in, you will see the router's control panel, where you can change your Wi-Fi name, password, restart the device, or check connected devices.
If you cannot reach the login page at all, make sure your device is actually connected to your Xfinity network (not a different Wi-Fi network), and that your router is powered on. The lights on the front of the router should be lit; if they are not, plug it in or check that the power cable is fully connected.
Key Takeaways
- The router login page is at 10.0.0.1 in your browser, and the default username is admin with password motorola.
- If the default password does not work, look for login credentials printed on a sticker attached to your router.
- You must be connected to your Xfinity network (either by Wi-Fi or ethernet cable) to reach the login page.
- Once logged in, you can change your Wi-Fi password, restart the router, or see which devices are connected.
- If you changed your password before and cannot remember it, you will need to reset the router to factory defaults.
What to do if you changed your password and forgot it
If you previously changed the router's admin password and no longer remember it, the only way to regain access is to reset the router to its factory defaults. This will erase any custom settings you made, including your Wi-Fi name and password, so use this only as a last resort.
To reset the router, locate the small reset button on the back or bottom of the device (it is usually recessed so you cannot press it by accident). Use a paperclip or the tip of a pen to hold down the reset button for 10 to 15 seconds while the router is powered on. The lights on the front will blink and the router will restart. Once it finishes restarting, the login credentials will be back to the defaults (admin / motorola).
Accessing the router from outside your home network
The address 10.0.0.1 only works when you are connected to your Xfinity network. If you are away from home and want to check your router settings, you can log in through the Xfinity app or the Xfinity website instead.
read the Xfinity app on your phone or visit xfinity.com and sign in with your Xfinity account username and password (the same one you use to pay your bill). From there, you can view your network status, restart your router, or change your Wi-Fi password without being physically connected to the network. This remote access is one of the main reasons Xfinity recommends using your account password rather than leaving the default router password in place.
Why you should change the default password
The default password motorola is the same on thousands of Xfinity routers. Anyone on your Wi-Fi network who knows this password can log into your router's control panel and change your settings, disconnect devices, or reset the entire network.
After you first log in with the default credentials, go to the settings or administration section of the router's control panel and change the admin password to something only you know. Write it down or save it in a password manager so you do not forget it. This takes only a few minutes and prevents neighbors or guests from tampering with your network.
Common reasons the login page will not load
If you type 10.0.0.1 and the page does not appear, check these things in order. First, confirm that your device is connected to your Xfinity Wi-Fi network by looking at your available networks list. Second, make sure the router is powered on — look for lights on the front panel. Third, try a different web browser (Chrome, Firefox, Safari, or Edge) in case your current browser is caching an old version of the page.
If none of those work, restart your router by unplugging it for 30 seconds, then plugging it back in. Wait two to three minutes for it to fully restart, then try 10.0.0.1 again. If the page still does not load after a restart, your router may have a hardware problem and you should contact Xfinity support or consider replacing the device.
What you can do once you are logged in
The router's control panel lets you manage several things without calling Xfinity. You can change your Wi-Fi network name (SSID) and password, restart the router, see which devices are currently connected, set up a guest network, or adjust security settings. Some routers also let you set parental controls or create a schedule for when Wi-Fi turns on and off.
If you are having internet problems, the control panel often shows the status of your connection and whether the modem is communicating properly with Xfinity's network. You can also restart the router from here, which fixes many temporary connection issues. For more serious problems — like no internet at all, or speeds much slower than your plan — you will need to contact Xfinity support, as those issues usually involve the modem or the line itself, not the router settings.
Frequently Asked Questions
Can I log into my router from my phone?
Yes. Open any web browser on your phone, type 10.0.0.1, and log in the same way you would on a computer. You must be connected to your Xfinity Wi-Fi network. If you want to manage your router while away from home, use the Xfinity app or website instead.
What is the difference between the router password and the Wi-Fi password?
The router password (admin / motorola) is what you use to log into the control panel at 10.0.0.1. The Wi-Fi password is what guests and devices use to connect to your network. They are separate. You can change the Wi-Fi password from inside the control panel without changing the router password.
Do I need to log into my router to change my Wi-Fi password?
You can change it through the router's control panel at 10.0.0.1, or you can use the Xfinity app or website. The app and website are often easier if you do not remember the router password, since they use your Xfinity account login instead.
What should I do if I see a security warning when I try to log in?
Your browser may warn that the connection is not find because the router uses an older encryption method. This is normal for router login pages. Click through the warning or tell your browser to proceed anyway. Do not enter your login information on any page that is not 10.0.0.1 or the official Xfinity website.
Can someone else log into my router if they know the Wi-Fi password?
No. The Wi-Fi password only connects devices to your network. To log into the router's control panel, someone would need the router admin password (the one you use at 10.0.0.1). This is why changing the default router password from motorola to something unique is important.