The fastest way to reboot your AT&T modem

Rebooting your AT&T modem takes about five minutes and fixes most connection problems without calling support. The process is straightforward: unplug the power cable, wait 30 seconds, and plug it back in. During those 30 seconds, the modem clears its memory and resets its connection to AT&T's network.

You do not need to restart your router or computer. The modem is the device that connects to your wall outlet and your internet line — it is separate from the router that sends Wi-Fi around your home. Rebooting just the modem is usually enough to restore your internet.

Key Takeaways

  • Unplug the power cable from the back of the modem, wait 30 seconds, then plug it back in — this is a full reboot.
  • The modem's lights will go dark, then slowly come back on; wait for the internet light to turn solid green or white before using the connection.
  • A reboot clears temporary connection problems but does not erase your account information or settings.
  • If your internet does not return after 10 minutes, check that the cable from the wall is firmly seated in the modem's input port.

Step-by-step reboot instructions

Step 1: Locate the power cable. The power cable plugs into the back of the modem and into a wall outlet or power strip. It is usually a black cord with a barrel connector (a small cylindrical plug). Do not unplug the internet cable that comes from your wall — only the power cable.

Step 2: Unplug and wait. Pull the power cable out of the modem. Wait a full 30 seconds. You can count out loud or use a timer on your phone. This waiting period is important because it gives the modem time to fully discharge and clear its memory.

Step 3: Plug back in and wait for lights. Plug the power cable back into the modem. The lights on the front will go dark for a few seconds, then begin lighting up one by one. This process takes 2 to 5 minutes. Do not unplug the modem again during this time.

What the lights mean during startup

As your modem reboots, you will see the lights change. The power light (usually at the top or left) will turn on first. Then the internet light will begin blinking. This blinking means the modem is connecting to AT&T's network.

Wait until the internet light turns solid green, white, or blue — the exact color depends on your modem model, but solid means connected. Once that light is solid, your internet is back online. If you have a router connected to the modem, the router will also need a minute or two to reconnect.

If the internet light stays red or stays blinking after 10 minutes, the modem did not reconnect. Check that the cable from the wall is pushed firmly into the modem's input port (the port labeled "Internet" or "WAN"). If it is loose, push it in until you hear a click.

When to reboot versus when to call support

Reboot your modem first if your internet is slow, you cannot connect to Wi-Fi, or websites are not loading. These are usually temporary glitches that a reboot fixes in minutes. You should also reboot if you have not restarted the modem in several months — a reboot once a month keeps things running smoothly.

Do not reboot if you are in the middle of something time-sensitive like a video call or online game. Wait until you have a break. If rebooting does not restore your internet after two tries, or if the internet light stays red after 15 minutes, contact AT&T support. They can check whether there is an outage in your area or a problem with your account.

Common mistakes to avoid

The most common mistake is unplugging the wrong cable. The internet cable from the wall looks similar to a phone cable but is slightly wider. If you unplug that by accident, you will need to plug it back in before the modem can reconnect. Always unplug the power cable — the one that goes to the wall outlet.

Another mistake is not waiting long enough. Thirty seconds is the minimum. If you plug the modem back in after only 10 seconds, it may not fully reset. Set a timer on your phone so you do not guess.

A third mistake is unplugging the modem while it is still booting up. Once you plug it back in, leave it alone for the full 5 minutes while the lights come back on. Unplugging it again during startup can corrupt the connection and make the problem worse.

What a reboot does and does not do

A reboot clears temporary memory and resets the connection between your modem and AT&T's network. It does not erase your account information, your password, or any settings you have changed. When the modem comes back on, it will reconnect to your account automatically using the information AT&T has on file.

A reboot also does not fix hardware problems. If your modem is physically damaged, or if a cable is broken, rebooting will not help. In those cases, you will need to contact AT&T to replace the modem or the cable.

Frequently Asked Questions

How often should I reboot my modem?

Most people do not need to reboot regularly. Reboot only when you have a connection problem. If you find yourself rebooting more than once a month, contact AT&T support — that usually means something else is wrong.

Will rebooting delete my Wi-Fi password?

No. Your Wi-Fi password and network name are stored in your router, not your modem. Rebooting the modem does not change them. If you have a combined modem-router unit, the password is still safe.

What if the modem does not turn back on after I plug it in?

Check that the power outlet works by plugging in a lamp or phone charger. If the outlet is dead, try a different outlet. If the modem still does not power on, the power cable or modem may be damaged and you will need to contact AT&T for a replacement.

Can I reboot the modem while someone is using the internet?

Technically yes, but they will lose their connection for 5 minutes. It is better to reboot when no one is actively using the internet. If the connection is so bad that you need to reboot during the day, tell anyone using it first.

Is rebooting the same as a factory reset?

No. A reboot just turns the modem off and on. A factory reset erases all settings and returns the modem to its original state. You should never do a factory reset unless AT&T support tells you to — it will disconnect your internet until you reconfigure everything.