The three ways to restart your Comcast modem
You can reboot your Comcast modem three ways: unplug it for 30 seconds, press the reset button on the back, or use the Xfinity app or web portal. The unplugging method is safest and works for almost every problem. The reset button erases your settings and should only be used if unplugging does not fix the issue. The app or portal method is the gentlest—it restarts the modem without cutting power.
A reboot clears the modem's memory, stops any stuck processes, and forces it to reconnect to Comcast's network. This fixes most connection drops, slow speeds, and devices that won't connect. A reboot is different from a factory reset: rebooting keeps your settings, while a factory reset erases everything and returns the modem to its original state.
Key Takeaways
- Unplugging the modem for 30 seconds is the most reliable reboot method and works for connection problems, slow speeds, and devices that won't connect.
- The reset button on the back of the modem erases all your settings and should only be used if unplugging does not solve the problem.
- The Xfinity app or web portal lets you restart the modem without touching it, though this method is slower than unplugging.
- After any reboot, wait two to three minutes for the modem to fully restart and reconnect before testing your connection.
Method 1: Unplug the modem for 30 seconds
Locate the power cable at the back of your modem and pull it straight out of the outlet. Do not just turn off a power strip—pull the cable itself. Wait 30 seconds. During this time, all power drains from the modem's memory. Then plug the cable back in firmly until it clicks.
The modem will light up and begin its startup sequence. You will see lights flash on the front panel. Wait two to three minutes for all lights to stabilize. The downstream and upstream lights should be solid green or blue (the color depends on your modem model). Once they are steady, your connection is ready.
This method works because it forces the modem to forget any stuck state and reconnect to Comcast's network from scratch. Use this first for any connection problem.
Method 2: Press the reset button on the back
The reset button is a small, recessed button on the back of your modem, usually labeled "Reset" or "Restart." You will need a straightened paperclip or a ballpoint pen to reach it—the button sits inside a small hole so you cannot press it by accident with your finger.
Press and hold the reset button for 10 to 15 seconds, then release. The modem will power down, all lights will go dark, and then it will restart. Wait two to three minutes for the lights to stabilize again.
Warning: pressing the reset button erases your modem settings, including any custom DNS servers, port forwarding rules, or WiFi changes you made. Only use this method if unplugging the modem did not fix your problem. If you do press reset by accident, you will need to set up the modem again through the Xfinity app or by calling Comcast support.
Method 3: Restart through the Xfinity app or web portal
Open the Xfinity app on your phone or go to xfinity.comcast.net on a computer and sign in with your Comcast username and password. Tap or click "Internet" or "Devices," then select your modem from the list. Look for an option labeled "Restart Modem" or "Reboot."
Tap or click it, and the app will ask you to confirm. Select "Yes" or "Restart." The modem will reboot remotely without you touching it. This takes longer than unplugging—usually three to five minutes—because the modem stays connected to Comcast's network during the restart.
This method is useful if you cannot reach the modem physically, such as if it is mounted in a closet or attic. It also keeps your settings intact, since it is a soft reboot rather than a power cycle.
What to do while the modem restarts
Do not unplug or restart anything else while the modem is rebooting. If you have a separate router connected to the modem, leave it plugged in—it will automatically reconnect once the modem is back online. If you have a cable box or phone service, those will also reconnect on their own.
Avoid testing your connection for the first two minutes. The modem needs time to authenticate with Comcast's network and read its configuration. If you try to load a website or stream video too early, you may see a timeout error even though the modem is still starting up.
If the modem does not fully restart after five minutes, or if the lights do not stabilize, unplug it again and wait another 30 seconds before plugging it back in. Sometimes a second reboot is needed.
When to reboot versus when to call Comcast
Reboot your modem if you are experiencing a connection drop, slow speeds, devices that won't connect to WiFi, or a page that says "no internet connection." These are usually temporary glitches that a reboot fixes in minutes.
Call Comcast support if rebooting does not restore your connection after 15 minutes, if the modem lights stay red or dark, if you see a "provisioning" message that does not go away, or if your internet was working and then suddenly stopped without any action on your part. These signs point to a problem on Comcast's network or with your account, not your modem.
If you have rebooted three times in one week, that is also a sign to call support. Frequent reboots mean the modem is unstable, and Comcast may need to replace it or investigate your line.
Frequently Asked Questions
How long does a modem reboot take?
Unplugging takes about two to three minutes total. Using the reset button also takes two to three minutes. Using the app or web portal takes three to five minutes because the modem stays connected during the restart. Do not assume the reboot failed if it takes the full five minutes—that is normal.
Will rebooting erase my WiFi password?
No, rebooting keeps your settings. Only pressing the reset button erases your WiFi password and other settings. If you accidentally pressed reset, you can set up your WiFi again through the Xfinity app or by going to 192.168.0.1 in a web browser on a device connected to the modem with an ethernet cable.
Can I reboot the modem while someone is using the internet?
You can, but they will lose their connection for two to three minutes. It is better to reboot during a time when no one is actively using the internet, or to warn them first so they know the outage is temporary and expected.
What if the modem does not turn back on after I unplug it?
Make sure the power cable is fully plugged into both the modem and the wall outlet. Check that the outlet itself has power by plugging in another device, like a lamp. If the outlet works but the modem still does not turn on, the modem may be faulty and Comcast can send a replacement.
Is rebooting the same as a factory reset?
No. Rebooting restarts the modem but keeps all your settings. A factory reset erases everything and returns the modem to its original state. Only do a factory reset if Comcast support tells you to, or if you are returning the modem and want to clear your personal information.