What You Need to Do Before You Start

Replacing a Comcast modem means swapping out the device that connects your home to the internet. You can do this yourself in about 15 minutes without calling Comcast, as long as you have a compatible modem and know which cables to disconnect. The process is the same whether you're replacing a modem that stopped working or upgrading to a newer model.

Before you touch anything, gather what you need: your new modem (make sure it's on Comcast's approved list), the power cable that came with it, and your Ethernet cable if you want to connect a computer directly during setup. Write down your WiFi network name and password from your old modem—you'll need these to reconnect your devices. If you don't know them, log into your old modem's settings page (usually 192.168.0.1 in your browser) and find them there.

Check that your new modem is compatible with Comcast's network. Comcast publishes a list of approved modems on their website. If you bought the modem from Comcast directly, it will work. If you bought it elsewhere, verify the model number against that list before you start.

Key Takeaways

  • Turn off power to your old modem and router, then disconnect the coaxial cable (the thick one with the metal connector) from the wall outlet.
  • Connect the coaxial cable to the port labeled "Cable In" on your new modem, then plug in the power cable and wait 2 to 3 minutes for the lights to stabilize.
  • Your new modem will automatically register with Comcast's network within a few minutes; you do not need to call Comcast or enter account information.
  • Reconnect your router to the modem using an Ethernet cable, or connect your devices to the modem's WiFi using the network name and password printed on the modem's label.
  • If the lights do not turn green or you have no internet after 10 minutes, restart the modem by unplugging it for 30 seconds.

Disconnect Your Old Modem

Power down your old modem and your router (if you have one). Unplug both devices from the wall outlet. Wait 30 seconds—this clears any remaining charge and prevents damage when you disconnect the cables.

Locate the coaxial cable running from the wall outlet to your modem. This is the thick cable with a metal connector on each end, usually labeled "Cable In" or "From Wall." Unscrew it by turning counterclockwise. The connection is hand-tight; you should not need a wrench. Set the cable aside but do not let the metal end touch anything metal or get dirty.

Disconnect the power cable from your old modem. If you have an Ethernet cable running from the modem to a router or computer, unplug that too. Leave the old modem unplugged for now.

Connect the Coaxial Cable to Your New Modem

Take the coaxial cable from the wall and screw it onto the port on your new modem labeled "Cable In." Turn clockwise until it is snug—hand-tight is correct. Do not over-tighten; you will strip the threads. The cable should not wiggle or come loose when you gently tug it.

If the cable does not reach your new modem's location, you may need a longer coaxial cable (available at any hardware store for under $15). Do not use an extension cord or adapter unless it is specifically rated for coaxial cable.

Power On and Wait for Registration

Plug the power cable into your new modem and into a wall outlet. The modem will start up when ready. You will see lights on the front panel begin to flash. This is normal.

Wait 2 to 3 minutes without touching anything. During this time, the modem is connecting to Comcast's network and registering itself. You do not need to call Comcast, enter your account number, or do anything else—this happens automatically. The lights will change from flashing to solid green when the modem is ready. The "Online" or "Internet" light should be solid green; the "Power" light should also be solid green.

If the lights are still flashing after 5 minutes, or if you see a red light, wait another 2 minutes. If the lights do not turn green after 10 minutes total, unplug the modem for 30 seconds, then plug it back in and wait again.

Reconnect Your Router or Devices

If you have a separate WiFi router, connect it to your new modem using an Ethernet cable. Plug one end into the port on the modem labeled "Ethernet" or "LAN," and the other end into the "Internet" or "WAN" port on your router. Power on the router and wait 1 to 2 minutes for it to boot up. Your WiFi network should appear within a few minutes.

If you do not have a separate router, your new modem likely has built-in WiFi. Look for a sticker on the modem or in the box that shows the WiFi network name (SSID) and password. Use these to connect your phone, laptop, and other devices. The network name and password are unique to this modem.

If you want to use your old WiFi network name and password instead, log into your new modem's settings page (usually 192.168.0.1 in your browser) and change the WiFi settings there. You will need the admin password, which is often printed on the modem's label or in the manual.

Test Your Internet Connection

Open a web browser on any device connected to the modem and try to visit a website like google.com. If the page loads, your internet is working. If the page does not load, wait another minute and try again—the modem may still be finishing its setup.

If you still have no internet after 15 minutes, restart the modem by unplugging it for 30 seconds, then plugging it back in. Wait 3 minutes for it to come back online. If the "Online" light is still not solid green, or if you still cannot reach any websites, the modem may not be compatible with your Comcast account, or there may be a problem with the cable line itself. At that point, contact Comcast support.

What to Do With Your Old Modem

Once your new modem is working and all your devices are connected, you can dispose of the old one. If it was rented from Comcast (you paid a monthly fee for it), you should return it to a Comcast store or mail it back according to their instructions. If you owned it, you can recycle it at an electronics recycling center or donate it if it still works.

Do not throw it in the trash. Modems contain materials that should be recycled properly.

Frequently Asked Questions

Do I need to call Comcast when I install a new modem?

No. Your new modem registers itself automatically with Comcast's network within a few minutes of being powered on. You do not need to call, chat, or provide any information. If the modem does not come online after 15 minutes, then contact Comcast support.

What if my new modem does not have the same WiFi name as my old one?

Your new modem will have its own WiFi network name and password printed on a sticker. You can either connect your devices to this new network, or log into the modem's settings page and change the WiFi name and password to match your old network. This way, your devices will reconnect automatically.

Can I use a modem I bought from somewhere other than Comcast?

Yes, as long as it is on Comcast's approved modem list. Check the model number against the list on Comcast's website before you buy. If you already bought it, look up the model number to confirm it is compatible. If it is not on the list, it will not work with Comcast's network.

What do the lights on my modem mean?

The "Power" light should be solid green when the modem is on. The "Online" or "Internet" light should be solid green when you have an active connection. Flashing lights mean the modem is still starting up or connecting. Red lights mean there is a problem—usually a loose cable or a network registration issue. Restart the modem if you see red lights.

How long does it take for the modem to be ready to use?

Most modems are ready within 2 to 3 minutes of being powered on. Some take up to 10 minutes. If the "Online" light is solid green, you can start using the internet. If it is still flashing after 10 minutes, restart the modem by unplugging it for 30 seconds.