You can use your own modem instead of renting Xfinity's, but only certain models work on their network
Xfinity allows you to bring your own modem and connect it to their service, which stops the monthly rental fee (usually $14 to $16 per month). However, not every modem works with Xfinity—the modem must be on their approved list and support DOCSIS 3.1 or DOCSIS 3.0 technology. Before you buy, check the Xfinity Compatible Modems list on their website to confirm your model number is listed.
The process itself is straightforward: you unplug the Xfinity modem, connect your own modem to the coaxial cable and power, wait for it to boot, then contact Xfinity to register the device on your account. The whole setup takes about 15 to 20 minutes once your modem arrives.
Key Takeaways
- Only modems on Xfinity's official Compatible Modems list will work with their service—check the model number before you buy.
- Your modem must support DOCSIS 3.1 or DOCSIS 3.0 to connect to Xfinity's network.
- You will need to call Xfinity or use their online account portal to register your modem's MAC address after you connect it.
- Replacing the modem saves the monthly rental fee but does not change your internet speed or service plan.
- If your modem does not connect after setup, the issue is usually a MAC address registration problem or a coaxial cable that is not fully seated.
Check the Xfinity Compatible Modems list before buying
Xfinity publishes an official list of modems that work on their network. Go to xfinity.com, search for "compatible modems," and you will find a page with a searchable database. Enter the exact model number of any modem you are considering—for example, NETGEAR CM700 or Motorola MB8621. The list shows which DOCSIS version each modem supports and whether it is approved for Xfinity service.
Popular approved modems include the Motorola MB8621, NETGEAR CM1200, and Arris SB8200. These are widely available at electronics retailers and online. Avoid buying a modem that is not on the list—it will not connect to Xfinity's network, and you will not be able to return it for a refund once you realize the incompatibility.
If you have a very old modem (more than five years old) or one that only supports DOCSIS 2.0, it will not work. DOCSIS 3.0 is the minimum standard Xfinity requires now.
Physically connect your modem to the coaxial cable and power
Unplug the Xfinity modem from power and disconnect the coaxial cable (the thick cable that screws onto the back). Keep the coaxial cable—you will use it with your new modem. Screw the coaxial cable firmly onto the coaxial port on the back of your new modem. Hand-tighten it; do not use pliers.
Plug your modem into a power outlet. The lights on the front will begin to flash. Wait 3 to 5 minutes for the modem to fully boot and connect to Xfinity's network. You will see a steady light (usually labeled "Online" or "Internet") when the connection is active. If the lights do not stabilize after 5 minutes, unplug the modem, wait 30 seconds, and plug it back in.
Do not connect your router yet. First, you need to register the modem with Xfinity.
Register your modem's MAC address with Xfinity
The MAC address is a unique identifier on your modem that Xfinity uses to recognize it on their network. You can find it on a sticker on the back of the modem (it looks like 00:1A:2B:3C:4D:5E) or in the modem's settings page. To access the settings page, open a web browser and type 192.168.0.1 or 192.168.100.1—one of these will load your modem's admin panel. Look for the MAC address listed under "Device Information" or "System."
Contact Xfinity to register the modem. You can call 1-800-934-6489, use the Xfinity My Account app, or chat with support on xfinity.com. Have your account number and the modem's MAC address ready. Tell them you are replacing the rental modem with your own device. Xfinity will remove the old modem from your account and add the new one. This usually takes a few minutes.
After registration, your modem should reconnect automatically within a few minutes. If it does not, unplug it again, wait 30 seconds, and plug it back in.
Connect your router to the modem
Once the modem is registered and online, connect your router to it using an Ethernet cable. Plug one end into the Ethernet port on the back of the modem and the other end into the WAN or Internet port on the back of your router (it is usually a different color from the other ports). Power on your router and wait 2 to 3 minutes for it to boot.
Your router will now broadcast your Wi-Fi network. Look for the network name (SSID) and password on a sticker on the router or in its settings. Connect your devices as you normally would. You should see the same internet speed as before—replacing the modem does not change your service tier or speed.
Troubleshoot if your modem does not connect
If the modem's lights do not show an online connection after 10 minutes, the most common cause is that the coaxial cable is not fully seated. Unplug the modem, disconnect the coaxial cable, and screw it back on firmly. Plug the modem back in and wait 5 minutes.
If it still does not connect, the MAC address may not have been registered correctly. Call Xfinity again and confirm that the modem is on your account. Ask them to push a provisioning signal to the modem—this sometimes forces a reconnection. If Xfinity says the modem is not on their compatible list, you will need to return it and buy a different model.
In rare cases, the coaxial cable itself is damaged. If you have a spare cable, try swapping it in. If the modem connects with a different cable, the original cable is faulty and should be replaced.
What happens to the Xfinity modem rental fee
Once Xfinity removes the rental modem from your account, the monthly fee stops appearing on your next bill. The savings add up over time—at $14 per month, a modem that costs $100 to $150 pays for itself in 7 to 11 months. After that, you own the modem and have no rental fees.
If you ever need to return to an Xfinity modem (for example, if your modem fails and you do not have a replacement), you can call Xfinity and they will send you a rental modem. The fee will resume on your bill.
Frequently Asked Questions
Can I use any modem I want with Xfinity?
No. The modem must be on Xfinity's official Compatible Modems list and support DOCSIS 3.0 or 3.1. Check the list before you buy. Modems not on the list will not connect to Xfinity's network.
Do I need to return the Xfinity modem when I replace it?
Yes. Contact Xfinity and ask how to return the rental modem. They usually provide a prepaid shipping label or you can drop it off at an Xfinity store. If you do not return it, Xfinity may charge you a non-return fee (typically $100 to $150).
Will my internet speed change if I use my own modem?
No. Your speed is determined by your service plan, not the modem. A DOCSIS 3.1 modem supports faster speeds than DOCSIS 3.0, but Xfinity will only deliver the speed your plan includes. The modem just needs to support at least that speed.
What if my modem connects but my internet is slow?
Slow speed is usually a router issue, not a modem issue. Restart your router by unplugging it for 30 seconds and plugging it back in. If speed is still slow, move closer to the router to rule out Wi-Fi range. If the modem's online light is steady and you are close to the router, contact Xfinity to check your service.
Can I use a modem and router combo device?
Yes, if the combo device is on Xfinity's Compatible Modems list. Search for the model number on their list to confirm. Combo devices work the same way—you register the MAC address and connect it to the coaxial cable.