A factory reset clears all settings and returns your Arris modem to its original state

An Arris modem reset wipes out your current configuration—including your Wi-Fi network name, password, and any custom settings—and restores the modem to how it came from the factory. This is different from a straightforward restart (unplugging it for 30 seconds), which just reboots the device without erasing anything. A reset is useful when your modem is stuck, won't connect to the internet, or has settings you can't remember how to undo.

After a reset, you'll need to set up your Wi-Fi network again and may need to contact your internet provider to reactivate your account. The whole process—from pressing the reset button to having internet working again—usually takes 20 to 30 minutes, most of which is waiting for the modem to restart and for your provider to reactivate service.

Key Takeaways

  • A factory reset erases all settings and returns the modem to its original state, while a restart just reboots it without erasing anything.
  • Most Arris modems have a recessed reset button on the back that you hold for 10 to 15 seconds with a paperclip or pin.
  • After a reset, your modem will restart and you'll need to reconnect to Wi-Fi and contact your internet provider to reactivate service.
  • If your modem is unresponsive or frozen, try a straightforward restart first by unplugging it for 30 seconds before attempting a factory reset.

Locate the reset button on the back of your modem

The reset button on an Arris modem is small and recessed—it's designed that way so you don't accidentally press it. Look on the back panel of your modem for a tiny hole labeled "Reset" or sometimes just marked with a small circle. The button sits inside that hole. You'll need a straightened paperclip, a ballpoint pen, or a similar thin, pointed object to reach it. Do not use a pencil, as the graphite can break off inside the hole.

If you can't find the reset button, check your modem's model number (usually on a sticker on the bottom or back) and look up the manual online. Different Arris models—such as the SB6121, SB6141, or MB8600—may have the button in slightly different locations, though most follow the same recessed-hole design on the rear panel. Some older models may have the reset button on the front instead, so check both sides if the back doesn't have one.

Perform a factory reset using the reset button

Unplug the power cable from the back of your modem and wait 30 seconds. This ensures the modem is completely powered down before you reset it. Plug the power cable back in and wait for the lights on the front to stop blinking and settle into a steady pattern—this usually takes 1 to 2 minutes. The modem needs to be fully booted before you perform the reset.

Once the modem has fully booted up, insert your straightened paperclip or pin into the reset hole on the back. Press and hold the reset button for 10 to 15 seconds. You may see the lights on the front flash or change color, which indicates the reset is in progress. Keep holding until the lights stop flashing and the modem appears to restart. Release the button and wait another 2 to 3 minutes for the modem to complete its restart cycle. Do not unplug the modem during this time.

What happens when ready after the reset

Your Arris modem will restart and go through its boot-up sequence. The lights on the front will cycle through different colors and patterns—this is normal and expected. After 2 to 3 minutes, the modem should settle into a stable state, typically with a solid power light and a blinking or solid internet light (the exact pattern depends on your model). The modem is now back to factory settings.

At this point, your Wi-Fi network name and password no longer exist—the modem will broadcast a default network name (often something like "Arris-XXXX" or "SB6121-XXXX"). Your internet connection may not be active yet. This is expected and does not mean something went wrong. You'll see the default network available when you look for Wi-Fi on your phone or computer, and you can now proceed to reconnect and set up a new network.

Reconnect to Wi-Fi and reactivate your internet service

On your phone, tablet, or computer, look for the Wi-Fi network broadcast by your modem. It will have a name like "Arris-XXXX" (where XXXX are numbers or letters specific to your modem). Connect to that network. You may be prompted to enter a password; check the back or bottom of your modem for a sticker that lists the default Wi-Fi password (often labeled "WiFi Password" or "Network Key").

Once connected, open a web browser and try to visit any website. You should see a setup page for your Arris modem. If you do not, try typing 192.168.0.1 or 192.168.100.1 into the address bar—one of these is usually the modem's default IP address. From this setup page, you can create a new Wi-Fi network name and password that you'll remember.

Your internet service itself may not be active yet. Contact your internet provider and tell them you have reset your modem. They will need your modem's MAC address (a unique identifier, usually found on a sticker on the modem) to reactivate your account. The provider will walk you through the reactivation process, which usually takes a few minutes. Once complete, your internet connection should be live and you should see the internet light on your modem change to indicate an active connection.

Try a restart instead if you want to keep your settings

If you're having connection problems but want to keep your Wi-Fi network name, password, and other settings, try a straightforward restart instead of a factory reset. Unplug the power cable from the back of your modem, wait 30 seconds, and plug it back in. Wait 2 to 3 minutes for it to fully restart. This clears temporary glitches without erasing your configuration, and you won't need to contact your provider afterward.

A restart fixes most common issues—slow speeds, dropped connections, or the modem not responding. If a restart does not solve the problem after you've waited the full 2 to 3 minutes, then a factory reset may be necessary. However, if you're unsure whether the problem is with your modem or your internet service, contact your provider before resetting; they can run diagnostics on their end and may be able to fix the issue remotely without you having to reset anything.

When to call your internet provider instead of resetting

If your modem lights are off or not turning on at all, check that the power cable is firmly connected to both the modem and the wall outlet. Try a different outlet to rule out a dead power socket. If the lights still don't come on after checking both connections, the modem may have a hardware failure and resetting won't help—contact your provider to discuss replacement options.

If you've reset the modem, reconnected to Wi-Fi, and contacted your provider for reactivation, but you still have no internet connection after 30 minutes, there may be an issue with your service line or account. Call your provider's support line. Have your account number and modem MAC address ready. They can check whether your service is active, run a line test from their end, and troubleshoot the problem without you having to do anything else on your end.

Frequently Asked Questions

Will resetting my modem delete my internet service?

No, resetting the modem does not cancel your internet service with your provider. It only erases the modem's settings. Your account remains active, but you'll need to contact your provider to reactivate the modem on your account after the reset. This usually takes a few minutes.

How do I find the default Wi-Fi password after a reset?

The default Wi-Fi password is printed on a sticker on the back or bottom of your Arris modem, usually labeled "WiFi Password," "Network Key," or "Passphrase." If the sticker is missing or illegible, contact your internet provider—they can provide the default password or help you set up a new one.

What's the difference between a reset and a restart?

A restart (unplugging for 30 seconds and plugging back in) reboots the modem but keeps all your settings. A reset (holding the reset button) erases all settings and returns the modem to factory defaults. Try a restart first for connection problems; use a reset only if a restart doesn't work.

How long does it take for the modem to work after a reset?

The modem itself will be ready in 2 to 3 minutes. However, your internet service won't be active until you contact your provider and they reactivate your account, which usually takes another 5 to 15 minutes. Plan for 20 to 30 minutes total from reset to full service.

Can I reset my modem using the web interface instead of the button?

Yes, if you can still access the modem's web interface (by typing 192.168.0.1 or 192.168.100.1 into your browser), you can usually find a reset option in the settings menu. However, if your modem is frozen or unresponsive, the physical reset button is your only option.