A reset clears your modem's settings and restarts its connection to Cox's network

A reset wipes your modem back to factory defaults and forces it to reconnect to Cox. This fixes most connection problems — slow speeds, dropped internet, or a modem that won't turn on — without a technician visit. There are two types of reset: a soft reset (restart) and a hard reset (factory reset). A soft reset takes 30 seconds and solves most problems. A hard reset erases all your settings and should only be your second choice.

Before you reset, know that a hard reset will erase any custom settings you've made, including your WiFi network name and password. A soft reset will not. Most of the time, a soft reset is all you need.

Key Takeaways

  • A soft reset (power cycle) takes two minutes and fixes most Cox modem problems without erasing your settings.
  • Unplug the modem for 30 seconds, then plug it back in and wait three to five minutes for all lights to stabilize.
  • A hard reset erases your WiFi name, password, and any custom settings, so only use it if a soft reset doesn't work.
  • The hard reset button is recessed on the back of the modem and requires a paperclip or pin held for 10 to 15 seconds.
  • After either reset, your modem takes five to ten minutes to reconnect; do not unplug it during this time.

How to do a soft reset (power cycle)

A soft reset is the first step and solves most problems. You do not need any tools, and your settings stay in place.

Unplug the power cable from the back of the modem. Wait 30 seconds — this clears the modem's memory. Plug the power cable back in. The lights on the front will flash and change color as the modem restarts. Wait three to five minutes for all the lights to stop flashing and settle into a steady pattern. The modem is ready when the online light (usually labeled "Online" or shown as a solid green light) stays on without blinking.

Test your internet connection. If your devices connect and the internet works, the reset solved the problem. If not, move to a hard reset.

How to do a hard reset

A hard reset returns the modem to its original factory settings. This erases your WiFi network name, password, and any other custom settings you've made. Only do this if a soft reset did not fix the problem.

Locate the Reset button on the back of the modem. It is recessed (pushed in slightly) so it cannot be pressed by accident. You will need a straightened paperclip, a ballpoint pen, or a small pin to reach it. Press and hold the Reset button for 10 to 15 seconds while the modem is powered on. The lights will flash rapidly, and the modem will restart. This takes one to two minutes. Do not unplug the modem during this time.

Wait five to ten minutes for the modem to fully reconnect to Cox's network. The online light should turn solid green. Your modem is now back to factory settings.

What to do after a hard reset

After a hard reset, your modem has no WiFi network set up. You will need to set up your WiFi again before your devices can connect wirelessly.

Look for a sticker on the modem or its box that shows a default WiFi network name and password. Connect to that network on your phone or computer. Open a web browser and go to 192.168.0.1 or 192.168.100.1 (the address depends on your modem model). You may be asked to log in; the default username is usually admin and the password is usually motorola or admin (check your modem's sticker). From there, you can create a new WiFi network name and password.

If you do not see a setup page, contact Cox support. They can walk you through the setup or send a technician if the modem is not connecting to their network.

When to call Cox instead of resetting

A reset fixes most problems, but some issues need a technician. If your modem still will not connect after a soft reset and a hard reset, the problem is likely with Cox's network in your area or with the modem itself.

Call Cox at the number on your bill or visit their website to report an outage. If there is no outage in your area, the modem may be faulty. Cox can send a replacement modem at no charge if yours is defective. Do not buy a new modem yourself unless Cox tells you to — most Cox customers must use a Cox-provided modem.

Signs a reset will not fix the problem

Some problems are not caused by the modem. If you see these signs, a reset will not help, and you should contact Cox instead.

Your modem lights up and the online light turns green, but you still have no internet on any device. This usually means the problem is with Cox's service in your area, not your modem. Your modem is very hot to the touch or smells like burning plastic. This means the modem is failing and needs to be replaced. The modem will not power on at all, even after you unplug it for a full minute and plug it back in. This usually means the power supply is broken.

Frequently Asked Questions

How long does a reset take?

A soft reset takes about two minutes total — 30 seconds unplugged, then three to five minutes for the modem to reconnect. A hard reset takes five to ten minutes because the modem must reconnect to Cox's network and set up its default WiFi. Do not unplug the modem during either process.

Will I lose my internet history or passwords if I reset?

No. A reset only affects the modem itself, not your devices or accounts. Your browser history, saved passwords, and files on your computer stay exactly as they are. A hard reset erases only the modem's WiFi settings and network configuration.

What if the reset button is stuck or won't press?

The button is recessed on purpose and can be hard to reach. Make sure you are using a thin, straight object like a paperclip or the tip of a ballpoint pen. Press firmly and hold for the full 10 to 15 seconds. If it still will not press, do not force it — contact Cox and ask for a replacement modem.

Can I reset my modem from my phone or computer?

You cannot do a hard reset remotely, but some Cox modems allow a soft reset through the Cox app or website. Check your Cox account online or in the Cox app for a "Restart Modem" option. If you do not see one, unplug the modem by hand instead.

Do I need to tell Cox I reset my modem?

No. A soft reset does not require any notification. If you do a hard reset and the modem still will not connect, then contact Cox so they can check their network and help you set up the modem again.