The Two Types of Reset and When to Use Each

A soft reset restarts your modem without erasing any settings — it takes about two minutes and fixes most connection problems. A hard reset wipes everything back to factory defaults, including your network name and password, and should only be your last option if the soft reset does not work.

Start with a soft reset. Unplug the power cable from the back of your modem, wait 30 seconds, and plug it back in. The lights will flash as it boots up — this usually takes 2 to 3 minutes. Your internet should come back on its own. If it does not, or if you still have slow speeds or dropped connections after waiting, then move to a hard reset.

Key Takeaways

  • A soft reset (unplugging for 30 seconds) fixes most Xfinity modem problems and keeps your settings intact.
  • A hard reset erases all your settings and network name, so use it only if a soft reset does not work.
  • To hard reset, hold the small reset button on the back of the modem for 10 to 15 seconds while it is powered on.
  • After a hard reset, you will need to set up your network name and password again through the Xfinity app or by visiting 10.0.0.1 in a web browser.
  • If problems return after resetting, contact Xfinity support — the issue may be with the modem itself or your service line.

How to Do a Soft Reset

Unplug the power cable from the back of your modem. Count to 30 — this drains any remaining power and clears the modem's memory. Plug the cable back in.

Watch the lights on the front. You will see them flash in sequence as the modem boots. The process takes about 2 to 3 minutes. When the lights stop flashing and settle into a steady pattern (usually a solid white or green light), your modem is ready. Test your connection by opening a website or checking your email.

A soft reset works for slow speeds, dropped connections, pages that will not load, and devices that cannot find your network. It does not erase your network name, password, or any other settings you have made.

How to Do a Hard Reset

Only do this if a soft reset did not fix the problem. A hard reset erases everything, so you will have to set up your network name and password from scratch afterward.

Locate the small reset button on the back of your modem — it is usually recessed so you cannot press it by accident. While the modem is powered on and fully booted, use a straightened paperclip or a pen tip to press and hold the reset button for 10 to 15 seconds. The lights will flash rapidly, then go dark. Release the button and wait 2 to 3 minutes for the modem to restart.

Do not unplug the modem during a hard reset. The reset button does the work; unplugging while it is resetting can damage the modem's firmware.

Setting Up Your Network After a Hard Reset

After a hard reset, your modem will boot up with no network name or password. You have two ways to set it up again.

Using the Xfinity app: Open the Xfinity app on your phone, tap the menu, and look for "Connect to WiFi" or "Set up WiFi". The app will walk you through creating a new network name and password. This is the fastest route if you have the app already installed.

Using a web browser: Connect a computer to the modem with an ethernet cable (this works even without internet). Open a web browser and go to 10.0.0.1. You will see a setup page. Follow the prompts to create your network name and password. Once you save, disconnect the ethernet cable and reconnect your devices using the new network name and password you just created.

Common Mistakes That Make Things Worse

Do not unplug the modem multiple times in a row hoping it will fix itself faster — each restart takes time, and repeated resets can confuse the modem. Wait the full 2 to 3 minutes after plugging it back in before trying anything else.

Do not press the reset button during a soft reset. The reset button is only for hard resets. If you press it by accident during a soft reset, you will erase your settings when you did not mean to.

Do not move or restart your modem while the lights are flashing. Let it finish booting completely. If you interrupt it, the modem may not connect properly and you may have to reset again.

When to Contact Xfinity Instead of Resetting

If your modem still will not connect after a soft reset and a hard reset, the problem is likely not something a reset can fix. Contact Xfinity support — the issue may be a bad modem that needs replacement, a problem with your service line, or an outage in your area.

Also contact Xfinity if you reset the modem and it boots up but shows a red light instead of white or green. A red light usually means the modem cannot reach Xfinity's network, which is a service issue, not a modem issue.

Frequently Asked Questions

Will resetting my modem delete my email or files?

No. Your modem only handles your internet connection. It does not store email, files, photos, or anything else on your devices. A reset will not touch any of that.

How often should I reset my modem?

You should not need to reset it regularly. If you are resetting more than once a month, something else is wrong — contact Xfinity to check your service line or modem hardware. Frequent resets are a sign of a bigger problem, not a solution.

What if I forget my network password after a hard reset?

You can reset it again and create a new password, or you can log into the Xfinity app and change the password there without resetting the modem. The app is faster if you remember your Xfinity account login.

Can I reset my modem while devices are connected to it?

Yes, but they will lose internet during the reset. For a soft reset, this is fine — they will reconnect automatically once the modem is back up. For a hard reset, disconnect them first so you do not have to re-enter the new password on every device right away.

Does a soft reset take longer than a hard reset?

They both take about the same time to boot — 2 to 3 minutes. The difference is what happens after: a soft reset is done when the lights settle, but a hard reset requires you to set up your network again, which adds 5 to 10 minutes depending on which method you use.