The quickest way to reset your AT&T modem

A reset clears your modem's memory and forces it to reconnect to AT&T's network from scratch. Most connection problems — no internet, slow speeds, devices dropping off — stop after a reset. You have two options: a soft reset (restart) that takes two minutes, or a factory reset that erases all your settings and takes about ten minutes to reconfigure.

Start with a soft reset first. If that does not work, move to a factory reset. You will not lose your internet service — AT&T's system will recognize your modem when it comes back online.

Key Takeaways

  • A soft reset (power cycle) fixes most problems and takes two minutes: unplug the modem for 30 seconds, plug it back in, and wait for the lights to stabilize.
  • A factory reset erases all settings and returns the modem to its original state, useful only if a soft reset fails or your modem is behaving erratically.
  • The factory reset button is a small recessed hole on the back of the modem; use a paperclip or pen to hold it for 10 to 15 seconds while the modem is powered on.
  • After either reset, wait three to five minutes for the modem to reconnect to AT&T's network before testing your internet connection.
  • If your modem still will not connect after a factory reset, contact AT&T support — the issue may be on their network or your account may need reactivation.

Soft reset: power cycle your modem

A soft reset is the first step and solves most problems. Unplug the power cable from the back of the modem. Wait 30 seconds — this clears the modem's temporary memory. Plug the power cable back in.

Watch the lights on the front of the modem. You will see them flash and change color as the modem boots up. Wait until the lights stop changing and settle into a steady pattern — usually a solid green or white light for internet connection and a solid light for power. This takes two to three minutes. Once the lights are stable, test your internet by opening a web browser or checking if your devices reconnect.

If your internet works after this, you are done. If it still does not work, move to a factory reset.

Factory reset: erase all settings and start over

A factory reset returns the modem to the state it was in when it left the factory. This erases your Wi-Fi network name, password, and any other settings you changed. Use this only if a soft reset did not work.

Locate the reset button on the back of the modem. It is a small recessed hole, usually labeled "Reset" or "Restart." You cannot press it with your finger — you need a paperclip, ballpoint pen, or similar thin object. While the modem is powered on, insert the object into the hole and hold it down for 10 to 15 seconds. You may see the lights on the front flash or turn off. Release the button and wait.

The modem will restart and go through its boot sequence. This takes three to five minutes. The lights will flash, change color, and eventually settle. Once they are stable, the factory reset is complete.

What happens after a factory reset

Your modem will reconnect to AT&T's network automatically using the account information AT&T has on file. You do not need to do anything — just wait. However, your Wi-Fi network will be reset to the modem's default settings.

Check the sticker on the bottom or back of the modem. It will show a default Wi-Fi network name (usually something like "ATT1234567") and a default password. Use these to reconnect your devices. Once you are back online, you can change the Wi-Fi name and password through the modem's settings page if you want.

To access the settings page, open a web browser and type 192.168.0.1 or 192.168.100.1 into the address bar. You may be asked to log in — the default username is usually "admin" and the password is on the modem's sticker or in your AT&T paperwork.

When to try a reset versus calling AT&T

A reset is worth trying if your modem is not connecting, your internet is unusually slow, or your devices keep dropping off the network. It costs nothing and takes a few minutes.

Call AT&T support if a factory reset does not restore your connection after waiting five minutes, if the modem's lights never stabilize, or if you see error messages on the settings page. AT&T can check whether your account is active, whether there is an outage in your area, or whether the modem itself has failed. Have your account number and the modem's model number (printed on the sticker) ready when you call.

Avoiding accidental resets

The reset button is recessed specifically so you do not press it by accident. If you are moving the modem or cleaning behind it, be careful not to bump the reset button with a pen or other object. An accidental factory reset will disconnect your internet and erase your Wi-Fi settings.

If you have young children or pets, consider placing the modem where the back is not easily accessible. A reset caused by a child pressing the button or a pet knocking something into it will require you to reconfigure your Wi-Fi network.

Frequently Asked Questions

Will a reset delete my internet service or AT&T account?

No. A reset only clears the modem's memory. Your AT&T account and service remain active. The modem will reconnect to your account automatically once it boots back up.

How long does it take for the modem to reconnect after a reset?

A soft reset takes two to three minutes. A factory reset takes three to five minutes. During this time, the lights on the front will flash and change. Once they settle into a steady pattern, the modem is reconnected and ready to use.

What is the default Wi-Fi password after a factory reset?

The default password is printed on a sticker on the bottom or back of the modem. It is usually an 8 to 12 character code. You can change it to something easier to remember once you log into the modem's settings page.

Do I need to unplug the modem if I just want to restart it?

Unplugging it is the most reliable way to do a soft reset. Some modems have a power button, but unplugging ensures a complete power cycle. Wait 30 seconds before plugging it back in.

What if the modem still will not connect after a factory reset?

Wait another five minutes to make sure the modem has fully reconnected. If it still shows no internet light, the issue may be with AT&T's network, your account, or the modem itself. Contact AT&T support with your account number and modem model number.