The Two Ways to Reset a CenturyLink Modem

A soft reset restarts your modem without erasing its settings — this fixes most connection problems and takes about three minutes. A hard reset wipes everything back to factory defaults, which you only need if you are moving to a new provider or the modem will not respond to anything else. Most of the time, soft reset is what you want.

The soft reset is the first thing to try when your internet drops, pages load slowly, or devices keep disconnecting. It clears the modem's memory without touching your account information or Wi-Fi password. A hard reset is rarer — you would use it if you are returning the modem to CenturyLink, switching providers, or troubleshooting a modem that does not respond to the power button.

Key Takeaways

  • A soft reset (power off, wait 30 seconds, power on) fixes most internet problems and keeps your settings intact.
  • Unplug the modem from power, not just the router — the two are often separate devices.
  • Wait at least 30 seconds before plugging back in; the modem needs time to fully discharge.
  • A hard reset erases all settings and should only be used when switching providers or returning the modem.
  • After any reset, wait two to three minutes for the modem to fully boot before testing your connection.

How to Do a Soft Reset

Locate the power cable at the back of your CenturyLink modem. The modem is the box that connects directly to your wall outlet or phone line — it is usually separate from your router, though some CenturyLink packages combine them into one unit. Unplug the power cable from the modem itself, not from the wall outlet.

Wait 30 seconds. This gives the modem time to fully power down and clear its memory. You can count it out or set a timer on your phone. Do not skip this step — plugging it back in when ready will not clear the problem.

Plug the power cable back in. The lights on the front of the modem will flash as it boots up. The sequence usually goes: power light on, then internet light, then Wi-Fi light (if your modem has Wi-Fi). Wait two to three minutes for all lights to stabilize before testing your connection. If you have a separate router, you may need to restart that as well by unplugging it for 30 seconds.

How to Do a Hard Reset

A hard reset erases your modem's configuration and returns it to the state it was in when it left the factory. You will lose any custom settings, and your internet will not work until CenturyLink reconfigures the modem remotely or you set it up again. Only do this if you are returning the modem, switching to a different provider, or a technician has told you to.

Locate the small reset button on the back of your CenturyLink modem. It is usually recessed into the case so you cannot press it by accident. You will need a straightened paperclip, a ballpoint pen, or a SIM ejector tool to reach it. Press and hold the reset button for 10 to 15 seconds while the modem is powered on. The lights will flash and go dark as the modem erases its settings.

Release the button and wait for the modem to restart. This takes two to three minutes. Once the lights stop flashing and stabilize, the hard reset is complete. The modem is now back to factory settings. If you plan to use it again with CenturyLink, call their support line to have them reconfigure it. If you are returning it or switching providers, you can box it up as is.

When a Soft Reset Does Not Work

If your internet is still down after a soft reset, check the cables. Make sure the coaxial cable (the thick cable with a threaded connector) is plugged firmly into the wall outlet and into the back of the modem. If it is loose, tighten it by hand — you should not need a wrench. Also check that the power cable is fully inserted into both the modem and the wall outlet.

Restart your router separately if you have one. Unplug it for 30 seconds, then plug it back in. Sometimes the problem is in the router, not the modem. If you have a combined modem-router unit, the soft reset covers both.

If the modem still will not connect after 10 minutes, check CenturyLink's service status page for your area. Outages happen, and no reset will fix them. You can also call CenturyLink support at 1-800-CENTURYLINK (1-800-236-8827) to report the problem and ask whether they see an outage or a fault on your line.

Modem Lights and What They Mean

Most CenturyLink modems have four lights on the front: power, internet, Wi-Fi, and sometimes a phone light. After a reset, watch them come back on in order. The power light should be solid green or white. The internet light should be solid green once the modem has connected to CenturyLink's network — this usually takes one to two minutes. If the internet light stays red or orange, the modem cannot reach the network.

The Wi-Fi light shows whether your wireless network is broadcasting. If you have Wi-Fi, it should be solid or blinking green. A blinking light means data is moving across the network, which is normal. If the Wi-Fi light is off, your wireless is disabled — you can turn it back on using the Wi-Fi button on the modem or through the modem's settings page (usually accessed at 192.168.0.1 in your web browser).

Difference Between Modem and Router

Your modem connects to CenturyLink's network and brings internet into your home. Your router takes that internet and broadcasts it wirelessly to your devices. Some CenturyLink packages give you a combined unit that does both, but many have them as separate boxes. If you have two boxes, you may need to restart both to fix a connection problem.

The modem is the one plugged into the wall outlet or phone line. The router is the one with antennas (or no visible antennas if it is newer). If you are not sure which is which, look for the coaxial cable — the thick cable with a threaded connector. That plugs into the modem. The router usually connects to the modem with an Ethernet cable.

Frequently Asked Questions

Will a soft reset erase my Wi-Fi password?

No. A soft reset keeps all your settings, including your Wi-Fi name and password. Your devices will stay connected without you having to re-enter anything. A hard reset will erase your Wi-Fi password and all other settings.

How long should I wait before plugging the modem back in?

Wait at least 30 seconds. This gives the modem's capacitors time to fully discharge. If you plug it back in after just a few seconds, the reset may not work. A full minute is even safer if you have time.

Do I need to restart my router too?

If your router is separate from your modem, restarting it separately can help. Unplug it for 30 seconds, then plug it back in. If you have a combined modem-router unit, one soft reset covers both.

What if the modem does not turn back on after I plug it in?

Check that the power cable is fully inserted into both the modem and the wall outlet. Try a different wall outlet to rule out a bad outlet. If the modem still will not power on, the power supply may be faulty — contact CenturyLink to request a replacement.

Can I reset my modem while I am using the internet?

Yes, but your internet will go down for two to three minutes during the reset. Make sure you are not in the middle of uploading a file, streaming video, or anything else that needs a live connection. It is best to reset during a time when you are not actively using the internet.