The Two Ways to Reset Your Xfinity Modem

A soft reset (power cycle) fixes most connection problems and takes two minutes. A hard reset erases all your settings and returns the modem to factory defaults — use this only if the soft reset does not work or if you are returning the equipment.

The soft reset is your first move for slow speeds, dropped connections, or devices that won't connect. The hard reset is a last resort because you will need to set up your modem again afterward, and Comcast may need to re-provision it on their end.

Key Takeaways

  • A soft reset means unplugging the modem for 30 seconds, then plugging it back in — this fixes most connection issues without erasing anything.
  • A hard reset requires holding the reset button on the back of the modem for 10 to 15 seconds, which wipes all settings and requires setup again.
  • After either reset, wait three to five minutes for the modem lights to stabilize before testing your connection.
  • If your modem still does not work after a soft reset, contact Comcast support before attempting a hard reset.

How to Do a Soft Reset (Power Cycle)

Unplug the power cable from the back of your modem. Wait 30 seconds — this clears the modem's memory and stops all processes. Then plug the power cable back in.

The modem will restart. You will see the lights on the front flash and change color as it boots up. Wait three to five minutes for the lights to settle into their normal pattern. The online light should be solid white or green, depending on your modem model. Do not unplug it again during this time.

Once the lights are stable, test your connection by opening a web browser or checking if your devices reconnect to WiFi. If your connection is back, the soft reset worked.

How to Do a Hard Reset

A hard reset erases your WiFi password, network name, and any custom settings. Only do this if a soft reset did not work or if you are returning the modem to Comcast.

Locate the small reset button on the back of the modem. It is usually recessed so you cannot press it by accident. Use a paperclip, pen, or the tip of a straightened paper clip to press and hold the button for 10 to 15 seconds. You may see the lights flash or turn off. Release the button.

The modem will restart and return to factory settings. Wait three to five minutes for the lights to stabilize. The modem will then need to be set up again — you will see a default WiFi network name (usually something like "XFINITY" or "XFINITY-XXXX") broadcast from the modem.

What to Do After a Hard Reset

After a hard reset, your modem is not yet connected to Comcast's network. You have two options: set it up yourself using the Xfinity app, or call Comcast to have a technician provision it remotely.

To set it up yourself, read the Xfinity app on your phone or visit xfinity.com/support/modems. Connect to the default WiFi network broadcast by the modem, then follow the app's setup steps. The app will walk you through connecting to your Comcast account and creating a new WiFi password.

If the app setup does not work or you prefer not to do it yourself, call Comcast at 1-800-934-6489. A representative can provision the modem on their end, which usually takes 10 to 15 minutes. You will need your account number and service address.

When to Soft Reset vs. Hard Reset

Use a soft reset first for any connection problem: slow speeds, devices dropping off WiFi, pages that won't load, or streaming that keeps buffering. A soft reset almost never makes things worse, and it fixes the problem about 70 percent of the time.

Use a hard reset only if the soft reset did not work after you have waited the full five minutes for the modem to stabilize. Also use a hard reset if you are returning the modem to Comcast, because the next person who uses it should not have your WiFi password or network settings.

If a hard reset does not fix the problem, the issue is likely with your internet service itself, not the modem. Contact Comcast support and describe what happened — they can check your line and account from their end.

Modem Lights and What They Mean During Reset

When you first unplug the modem, all lights go dark. When you plug it back in, the lights will flash in sequence as the modem boots. This is normal and can take 30 seconds to two minutes.

Once the modem is ready, the online light (usually labeled "Online" or "Internet") should be solid white, green, or blue depending on your model. If it is blinking or red after five minutes, the modem is not connecting to Comcast's network. Try the soft reset again, or contact Comcast if it still does not work.

During a hard reset, the lights may flash rapidly or go dark for several seconds. This is normal. Wait the full three to five minutes before checking the lights again.

Frequently Asked Questions

Do I lose my WiFi password when I do a soft reset?

No. A soft reset keeps all your settings, including your WiFi network name and password. Your devices should reconnect automatically once the modem finishes restarting.

How long does it take for the modem to be ready after I plug it back in?

Three to five minutes is typical. The modem needs time to boot, connect to Comcast's network, and synchronize. Do not unplug it again during this time, even if the lights are still flashing.

What is the default WiFi password after a hard reset?

There is no default password. After a hard reset, the modem broadcasts an open WiFi network with a name like "XFINITY-XXXX". You must set up the modem using the Xfinity app or by calling Comcast before you can create a password.

Can I reset my modem through the Xfinity app instead of unplugging it?

The Xfinity app lets you restart your modem remotely, which is the same as a soft reset. Open the app, go to the Internet section, find your modem, and select Restart. This is convenient if you cannot reach the modem physically, but unplugging it works just as well.

What if my modem still does not work after I reset it?

Contact Comcast at 1-800-934-6489 or through the Xfinity app. Describe what you tried and what happened. They can check your account, test your line, and determine whether the problem is the modem, the service, or something else.