The fastest way to reset your Cox modem
A reset clears your modem's memory and forces it to reconnect to Cox's network from scratch. Most connection problems — no internet, slow speeds, or devices dropping off — stop after a reset. You have two options: a soft reset (restart) that takes 2 to 3 minutes, or a factory reset that erases all your settings and takes 5 to 10 minutes. Start with the soft reset unless Cox support tells you otherwise.
The soft reset is what you want 95 percent of the time. It powers the modem down and back up without losing your saved settings. A factory reset wipes everything and should only happen if the modem is not responding at all or if you are returning it to Cox.
Key Takeaways
- A soft reset takes 2 to 3 minutes and fixes most connection problems without erasing your settings.
- Unplug the modem for 30 seconds, then plug it back in and wait for all lights to return to normal before testing your connection.
- A factory reset erases all settings and should only be done if the modem is completely unresponsive or you are returning the equipment.
- If the modem still does not work after a soft reset, check that the coaxial cable is hand-tight at both ends before calling Cox support.
How to do a soft reset (the restart method)
Locate the power cable at the back of the modem. Pull it straight out of the outlet — do not use the power button on the modem itself, as that does not fully clear the memory. Wait 30 seconds. This pause lets the modem's capacitors drain completely.
Plug the power cable back in. The modem will boot up. You will see lights flash in sequence — usually a power light, then a downstream light, then an upstream light, then an online light. Wait until all lights stop flashing and settle into a steady state. This normally takes 2 to 3 minutes. Do not unplug it again during this time.
Test your connection. Open a web browser and load a website, or run a speed test at speedtest.net. If the problem is gone, you are done. If the modem still has no connection or is very slow, move to the next section.
How to do a factory reset (the full wipe)
A factory reset erases your modem's configuration and returns it to the state it shipped in. You will need to set up your network name and password again after the reset. Only do this if Cox support has told you to, or if the modem is completely unresponsive to a soft reset.
Locate the reset button on the back of the modem. It is usually a small, recessed button labeled "Reset" or "Reboot." You will need a straightened paperclip or a ballpoint pen to press it — the button is too small for your finger. Press and hold the button for 10 to 15 seconds while the modem is powered on. The lights will go dark, then the modem will restart.
Wait 5 to 10 minutes for the modem to fully boot. Once all lights are steady, the factory reset is complete. You will need to log into the modem's admin panel (usually at 192.168.0.1 in your browser) and set up your network name and password again. If you do not remember how to do this, Cox support can walk you through it over the phone.
What to check before you reset
Before you reset, spend 30 seconds checking the cables. A loose connection causes most "no internet" problems and will return after a reset if you do not fix it. Look at the back of the modem where the coaxial cable (the thick cable with a metal connector) screws in. Hand-tighten it — turn it clockwise until it is snug, but do not use pliers or force it. A hand-tight connection is all that is needed.
Also check that the power cable is fully inserted into the outlet. If the outlet is controlled by a wall switch, make sure the switch is on. These sound obvious, but they account for a large share of "modem not working" calls.
When to call Cox support instead of resetting
If the modem has no power light at all after you plug it in, the power supply may be dead. Do not keep resetting it. Call Cox at 1-800-234-3993 and tell them the modem has no power light. They can send a replacement.
If the modem powers on but the online light never turns green or blue after 10 minutes, the issue is likely on Cox's network, not your modem. A reset will not fix this. Call Cox support and tell them the modem is powered on but not connecting to the network. They can check the line from their end and may need to send a technician.
If you reset the modem and your connection works for a few hours, then drops again, the problem is probably not the modem itself. This pattern usually points to a signal issue on the line or a problem with your router. Call Cox and describe what happened — they will ask you to check the signal levels in the modem's admin panel, which takes 2 minutes and helps them diagnose the real problem.
How to find your network name and password after a factory reset
After a factory reset, your modem will broadcast a default network name (SSID) that looks like "CoxWiFi-XXXX" or "Motorola-XXXX" depending on your modem model. The default password is usually printed on a sticker on the back or bottom of the modem. Look for a line that says "WiFi Password" or "Network Key."
Once you connect to that default network, open a web browser and go to 192.168.0.1. You will be asked to log in. The default username is usually "admin" and the default password is either "motorola" or "admin" — try both. From there, you can set up a new network name and password that you will remember.
Frequently Asked Questions
How long does a soft reset take?
A soft reset takes 2 to 3 minutes from the moment you unplug the modem until it is fully back online. The modem needs about 30 seconds unplugged, then 2 to 3 minutes to boot and connect to Cox's network. Do not unplug it again during the boot process.
Will a reset erase my saved passwords and settings?
A soft reset (unplugging and plugging back in) does not erase anything. A factory reset (pressing the reset button) erases all settings, including your network name and password. If you only do a soft reset, your settings stay the same.
What if the modem still does not work after I reset it?
Check the coaxial cable connection at the back of the modem — hand-tighten it if it is loose. If that does not help, call Cox at 1-800-234-3993. The problem may be on their network or the modem may need to be replaced.
Can I reset the modem while someone is using the internet?
You can, but they will lose their connection for 2 to 3 minutes. It is better to reset when no one is actively using the internet. If the modem is having problems, a reset usually fixes them faster than waiting for the problem to resolve on its own.
Do I need to reset the modem if I just got it from Cox?
No. New modems from Cox are already configured and ready to use. You should only reset if you are having connection problems or if Cox support tells you to.