A reset clears your modem's settings and restarts its connection to Cox's network

A reset on your Cox Panoramic modem wipes the device back to factory settings and forces it to reconnect to Cox's system. This is different from a straightforward restart—a restart just powers the modem off and back on, while a reset erases all stored settings. You should reset only when your modem is not responding to a restart, when you cannot log into the admin panel, or when Cox support directs you to do so. A reset will disconnect any devices you have manually configured on the modem, so you will need to set them up again afterward.

There are two types of reset: a soft reset (power cycle) and a factory reset. A soft reset is safe and should be your first step for any connection problem. A factory reset is more drastic and should only happen when a soft reset does not work.

Key Takeaways

  • A soft reset (unplugging for 30 seconds) restarts the modem without erasing settings and should be your first step when the modem is not working.
  • A factory reset (holding the reset button for 10 to 15 seconds) erases all settings and should only be done when a soft reset does not fix the problem.
  • After any reset, the modem takes 5 to 10 minutes to reconnect to Cox's network and restore your internet.
  • You will need to log back into the modem's admin panel and reconfigure any manual settings or port forwarding you had set up.
  • If the modem still does not work after a factory reset, contact Cox support—the device may need replacement.

How to do a soft reset (power cycle)

A soft reset is the safest first step and fixes most connection problems. Unplug the power cable from the back of the modem, wait 30 seconds, and plug it back in. The lights on the front will flash as the modem restarts. Wait 5 to 10 minutes for all lights to stabilize—you should see a solid white or green light on the "Online" indicator when the modem has reconnected to Cox's network.

During this time, avoid unplugging the modem again or restarting your router. If you have a battery backup (UPS) connected to the modem, the soft reset may not work because the battery keeps power flowing—in that case, unplug the battery backup as well. The modem needs a complete loss of power to reset properly.

How to do a factory reset

A factory reset erases all settings and returns the modem to the state it was in when it left the factory. Locate the small reset button on the back of the Panoramic modem—it is recessed into the case so you cannot press it by accident. Use a straightened paperclip or a ballpoint pen to press and hold the button for 10 to 15 seconds while the modem is powered on. The lights will flash rapidly, and the modem will restart.

Do not release the button early. The modem will take 5 to 10 minutes to fully restart and reconnect to Cox's network. You will know the reset is complete when the lights stop flashing and the "Online" light shows solid white or green. This is the point at which your internet service should return.

What happens after a factory reset

Once the modem reconnects, your internet service should work when ready—Cox's system will recognize the modem by its serial number and restore your account settings. However, any settings you manually configured on the modem itself will be gone. This includes WiFi network names, WiFi passwords, port forwarding rules, and any devices you had blocked or allowed on the network.

Log into the modem's admin panel by opening a web browser and typing 192.168.0.1 into the address bar. The default username is admin and the default password is motorola (or sometimes blank). Change the WiFi password when ready so unauthorized devices cannot connect. If you had port forwarding or firewall rules set up, you will need to recreate them from scratch.

When to restart instead of reset

A soft reset (power cycle) fixes most problems and should always be your first step. Use it when your internet is slow, when you cannot reach a website, when your WiFi keeps dropping, or when the modem is not responding. A factory reset should only happen when a soft reset does not work after you have waited the full 10 minutes for reconnection.

If restarting your router (not the modem) does not fix the problem, restart the modem next. Many connection issues live in the router, not the modem, so restarting both devices in order—router first, then modem—often solves the problem without erasing any settings. This approach preserves your configuration while giving both devices a fresh start.

What to do if the modem will not reconnect after a reset

If the "Online" light does not turn solid after 15 minutes, check that the coaxial cable (the thick cable from the wall) is hand-tight at both the wall and the modem. Unscrew it slightly and screw it back in firmly. Wait another 5 minutes. If the light is still not solid, try a soft reset again—unplug for 30 seconds and plug back in.

If the modem still will not reconnect after two soft resets and a cable check, contact Cox support. The modem may have a hardware fault or there may be an outage in your area. Cox can check your account and the network from their end and tell you whether the modem needs replacement. Do not attempt a factory reset a second time if the first one did not work.

Frequently Asked Questions

Will a reset delete my Cox account or billing information?

No. A reset only erases settings stored on the modem itself. Your Cox account, billing, and service address stay the same in Cox's system. The modem will reconnect to your account automatically using its serial number.

Do I need to call Cox before I reset the modem?

No. A soft reset (power cycle) is safe to do anytime. A factory reset is also safe, but if the modem still does not work after a factory reset, you will need to contact Cox support anyway, so you might as well call them first if you are unsure.

How long does it take for the modem to work after a reset?

A soft reset takes 5 to 10 minutes. A factory reset also takes 5 to 10 minutes to reconnect. During this time, your internet will not work. Do not unplug the modem or restart it again—let it finish on its own.

What is the default WiFi password after a factory reset?

The modem will broadcast a WiFi network with a default name and password printed on a sticker on the back of the device. You should change both when ready by logging into the admin panel at 192.168.0.1 and updating the WiFi settings.

Can I reset the modem if I am in the middle of using the internet?

A soft reset will interrupt your internet for 5 to 10 minutes, so finish any downloads or uploads first. A factory reset will also interrupt your internet for the same amount of time. Avoid resetting during video calls or online gaming.