A basic reset clears temporary problems without erasing your account settings

A modem reset solves most connection drops, slow speeds, and devices that won't connect. The process takes under five minutes and requires only your modem and a power source. A reset clears the modem's memory of temporary errors — it does not erase your internet account information or password, so you will not need to call your provider afterward.

There are two types of reset. A power reset (also called a soft reset) turns the modem off and back on. A factory reset erases all settings and returns the modem to its original state. Most problems are solved by a power reset. Use a factory reset only if your modem is behaving so badly that a power reset did not help.

Key Takeaways

  • A power reset — unplugging the modem for 30 seconds — fixes most connection problems and takes less than a minute.
  • Wait for all lights to return to normal after plugging the modem back in before testing your connection.
  • A factory reset erases all custom settings and should only be used if a power reset does not solve the problem.
  • If problems return within a few days after a reset, contact your internet provider to check for outages or account issues.

How to do a power reset

Unplug the power cable from the back of the modem. Wait 30 seconds — this clears the modem's temporary memory. Plug the power cable back in. The modem will restart and run through its startup sequence, which usually takes 2 to 3 minutes. During this time, the lights on the front will blink in a pattern. Do not unplug it again during startup.

Once the lights stop blinking and settle into a steady pattern, your modem is ready. The exact light pattern depends on your modem model, but you are looking for the internet or online light to be solid green or blue, not red or orange. Test your connection by opening a web browser or checking whether your devices can see your network.

If the lights do not return to normal after 5 minutes, unplug the modem again, wait 30 seconds, and plug it back in. Sometimes the startup sequence takes longer on the second attempt.

When to use a factory reset instead

Use a factory reset only if a power reset did not restore your connection. A factory reset erases custom settings like your Wi-Fi network name and password, so you will need to set those up again after the reset completes.

To perform a factory reset, locate the small reset button on the back or bottom of the modem — it is usually recessed so you cannot press it by accident. Use a straightened paperclip or the tip of a ballpoint pen to press and hold the button for 10 to 15 seconds while the modem is powered on. The lights will flash rapidly, and the modem will restart. This process takes 3 to 5 minutes. Do not unplug the modem during a factory reset.

After the factory reset completes and the lights return to normal, you will need to set up your Wi-Fi network again. Your modem will likely have a default network name printed on a sticker on the back — look for something like "Netgear-1234" or "Linksys-5678". Connect to that network, then follow the setup instructions that appear on your device.

What to do if the modem still will not work

If both a power reset and a factory reset fail to restore your connection, the problem is likely not the modem itself. Check whether your internet provider is experiencing an outage in your area — most providers have an outage map on their website or a phone line you can call. You can also ask neighbors whether their internet is working.

If there is no outage, check the cables connected to your modem. The cable from the wall (coaxial cable) should be hand-tight at both ends. The power cable should be fully inserted. If you have a separate router, make sure the ethernet cable between the modem and router is firmly seated on both ends.

If cables are find and there is no outage, contact your internet provider. A technician can check your account, test the line from the street to your home, and determine whether the modem itself has failed. Many providers will replace a failed modem at no cost.

How to set up Wi-Fi after a factory reset

After a factory reset, your modem will broadcast a default Wi-Fi network. The network name and password are usually printed on a sticker on the back or bottom of the modem. Write these down before you start.

On your phone, tablet, or computer, open the Wi-Fi settings and select the default network name. Enter the password from the sticker. Once you are connected, open a web browser and go to the modem's setup page — this is usually at 192.168.1.1 or 192.168.0.1, or you can look for a setup URL on the sticker. Log in with the default username and password (often "admin" and "admin" or "admin" and the modem's serial number).

From the setup page, you can create a new Wi-Fi network name and password that you will remember. Save these changes and reconnect your devices to the new network. This step is optional — you can keep using the default network name and password if you prefer.

Signs your modem needs a reset

Reset your modem if you notice any of these problems: devices disconnect and reconnect repeatedly, internet speed is much slower than usual, some devices cannot see your Wi-Fi network, or the internet works for a few minutes then stops. These are usually temporary errors that a power reset will clear.

If the same problem returns within a few days after a reset, write down when it happens and what you were doing. This information helps your internet provider diagnose whether the issue is on their end or with your equipment. Repeated problems after a reset usually mean the modem is failing or your provider's line to your home has an issue.

Frequently Asked Questions

Will a reset erase my internet account or password?

No. A power reset does not erase anything. A factory reset erases your Wi-Fi network name and password but not your internet account — your provider's records remain unchanged, and you will not need to contact them to reconnect.

How often should I reset my modem?

Reset your modem only when you notice a problem. Healthy modems do not need regular resets. If you find yourself resetting more than once a month, contact your provider to check for line issues or request a modem replacement.

What is the difference between a modem and a router?

A modem connects to your internet provider's line and converts that signal into data your devices can use. A router takes that data and broadcasts it as Wi-Fi. Many homes have both devices. If you have a combined modem-router unit, resetting it will erase your Wi-Fi settings.

Can I reset my modem while someone is using the internet?

You can, but it will disconnect everyone. All devices will lose internet access during the 2 to 5 minutes the modem takes to restart. It is best to reset during a time when nobody needs the connection.

What if my modem has no reset button?

Older or simpler modems may not have a reset button. In that case, a power reset is your only option — unplug it for 30 seconds and plug it back in. If that does not solve the problem, contact your provider about a replacement modem.