Reset Your Arris Modem Without Losing Your Settings

A soft reset — unplugging the modem and plugging it back in — fixes most Arris modem problems without erasing your internet settings or requiring you to call your provider. This takes about five minutes and restores your connection in most cases where the modem has frozen, dropped the signal, or stopped responding to devices on your network.

If a soft reset does not work, you can perform a factory reset using the reset button on the back of the modem. A factory reset clears all settings and returns the modem to its original state, which means you will need to set it up again with your internet provider's information. Most people should try the soft reset first.

Key Takeaways

  • A soft reset — unplugging the modem for 30 seconds — fixes most connection problems and keeps your settings intact.
  • A factory reset using the reset button erases all settings and should only be done if a soft reset does not work or if you are returning the modem.
  • After either reset, wait two to three minutes for the modem lights to stabilize before testing your connection.
  • If problems continue after a soft reset, contact your internet provider before attempting a factory reset.

How to Perform a Soft Reset

Unplug the power cable from the back of the modem. Wait 30 seconds — this clears the modem's memory and allows capacitors inside to fully discharge. Plug the power cable back in and wait for the lights on the front of the modem to stop blinking and settle into a steady pattern.

The modem is ready when the power light is solid (usually white or green) and the internet light is solid or blinking slowly. This normally takes two to three minutes. Test your connection by opening a web browser or checking whether your devices can connect to the network.

If your connection is still down after the soft reset, restart your router as well. Unplug the router, wait 30 seconds, and plug it back in. Many connection problems live in the router, not the modem, so resetting both often solves the issue.

How to Perform a Factory Reset

Locate the small reset button on the back of your Arris modem — it is usually recessed so you cannot press it by accident. You will need a paperclip, pen, or similar tool to reach it. Press and hold the reset button for 10 to 15 seconds while the modem is powered on, then release it.

The modem will restart and all lights will go dark briefly. The reset process takes about two to three minutes. When the lights settle into a steady pattern again, the modem has returned to factory settings.

After a factory reset, you must set up the modem again. Contact your internet provider and ask for the setup instructions for your specific Arris model. You will need your account number and the modem's MAC address (printed on a label on the back of the unit) to complete the setup.

When to Soft Reset Versus Factory Reset

Use a soft reset first for any connection problem — slow speeds, dropped connections, devices not connecting, or the modem not responding. A soft reset fixes the vast majority of these issues and takes only five minutes.

Use a factory reset only if a soft reset does not work after you have waited the full two to three minutes for the modem to stabilize, or if you are returning the modem to your provider or selling it. A factory reset erases your settings, so you will spend 20 to 30 minutes setting the modem up again with your provider's help.

If a soft reset does not fix the problem, call your internet provider before doing a factory reset. They may be able to troubleshoot the issue over the phone or identify a problem on their network that a reset will not solve.

What the Modem Lights Mean During a Reset

During a soft reset, the power light will go dark when you unplug the modem. When you plug it back in, the power light will turn on and the other lights (internet, WiFi, and device lights) will begin blinking as the modem boots up. This blinking phase lasts one to three minutes.

When the lights stop blinking and settle into a steady pattern, the modem has finished starting up. A solid power light and a solid or slowly blinking internet light mean the modem is ready to use. If the internet light stays dark or blinks rapidly after three minutes, the modem is not connecting to your provider's network — unplug it again and wait another 30 seconds before plugging it back in.

Troubleshooting After a Reset

If your connection is still down after a soft reset, check that the coaxial cable (the thick cable that screws onto the back of the modem) is hand-tight and not loose. A loose cable is one of the most common reasons a modem loses connection. Tighten it by hand — do not use a wrench.

Restart your router as well if you have not already. Many people assume the problem is the modem when it is actually the router. Unplug the router, wait 30 seconds, and plug it back in. If your devices can connect to the router but have no internet, the problem is the modem. If devices cannot connect to the router at all, the problem is the router.

If the modem still does not connect after a soft reset and a router restart, contact your internet provider. They can check whether there is an outage in your area or a problem with your account. Do not perform a factory reset unless they tell you to — a factory reset will not fix a network outage or account problem and will only add setup time.

Frequently Asked Questions

Will a soft reset erase my WiFi password or internet settings?

No. A soft reset only clears the modem's temporary memory and does not touch your saved settings. Your WiFi password, internet connection details, and any other settings you configured will remain the same after a soft reset.

How long should I wait before plugging the modem back in?

Wait at least 30 seconds. This gives the modem's internal capacitors time to fully discharge. Plugging it back in after just a few seconds may not clear the problem. If you are in a hurry, 30 seconds is the minimum — waiting a full minute is even better.

What happens if I press the reset button by accident?

If you press it briefly (less than 3 seconds), nothing happens. The reset button requires you to hold it for 10 to 15 seconds to trigger a factory reset, so a quick accidental press will not cause any damage or changes.

Can I reset the modem while it is still plugged in?

For a soft reset, you must unplug it — that is what clears the memory. For a factory reset, you can press the reset button while the modem is powered on. Never unplug the modem during a factory reset, as this can interrupt the process and cause problems.

How do I know if my modem needs a factory reset?

Try a soft reset first. If the modem still will not connect to the internet after a soft reset and a router restart, and your provider confirms there is no outage, then a factory reset may help. Most connection problems are solved by a soft reset alone.