A modem reset clears its memory and restarts the connection to your internet service provider, which fixes most speed drops and connection freezes without calling support
A reset is different from a straightforward restart. When you restart, the modem powers off and back on but keeps its settings. When you reset, it returns to factory defaults, forgets your provider's settings, and has to reconnect from scratch. Most internet problems—lag, dropping signal, pages that won't load—clear up with a restart first. A full reset is what you do when a restart doesn't work, or when you're troubleshooting a specific issue your provider's support team has asked you to try.
The process takes about five minutes and requires nothing but your modem and a paperclip or pen. You will lose internet for a few minutes while it reconnects.
Key Takeaways
- A restart (power off and on) fixes most connection problems and should be your first step before attempting a reset.
- A reset returns the modem to factory settings and requires you to reconnect to your internet provider afterward, so only do this if a restart doesn't work.
- The reset button is usually recessed on the back of the modem and requires a paperclip or pen to press for 10 to 15 seconds.
- After a reset, your modem will take 2 to 5 minutes to reconnect; the lights will cycle through colors before settling into a stable pattern.
- If the modem still won't connect after a reset, contact your internet provider with the modem's serial number and MAC address, both printed on the device.
Restart your modem first—it solves most problems
Before you reset, try a restart. Unplug the power cable from the back of the modem, wait 30 seconds, and plug it back in. The lights will flash as it boots up. Wait two to three minutes for them to settle into a steady pattern (usually a solid green or blue light, depending on your modem model).
Test your connection by opening a website or running a speed test. If your internet is working normally, you're done—you didn't need a reset. Most connection problems clear up with a restart alone because it clears temporary memory without losing your provider's settings.
If the restart didn't fix the problem, or if your modem is not connecting at all, move on to a full reset.
Locate the reset button on the back of your modem
The reset button is almost always on the back of the modem, usually near the power port or the cable connections. It is recessed—meaning it sits inside a small hole—so you cannot press it with your finger. This is intentional; the recess prevents accidental resets.
You will need a paperclip, ballpoint pen, or a small straightened wire to reach it. Straighten a paperclip or use the back end of a pen. Do not use anything sharp or rigid enough to damage the plastic inside the hole.
Press and hold the reset button for 10 to 15 seconds
With the modem powered on, insert your paperclip or pen into the reset hole and press the button. Hold it down steadily for 10 to 15 seconds. You may feel a small click or resistance; that is normal. Do not release early—the full 10 to 15 seconds is necessary for the reset to take effect.
The modem will restart automatically. You will see the lights flash and cycle through different colors as it powers down and back up. This is normal and expected.
Wait for the modem to reconnect—this takes 2 to 5 minutes
After the reset, the modem will go through a startup sequence. The lights will flash, go dark, and then light up again in a pattern. Different modem models use different light patterns, but the general sequence is the same: the modem is finding your internet provider's network and logging back in.
Do not unplug the modem or press any buttons during this time. Let it sit and complete the connection on its own. Most modems take 2 to 5 minutes to fully reconnect. You will know it is done when the lights settle into a steady pattern—usually a solid green or blue light for internet connection and another light for the network signal.
Reconnect to your Wi-Fi network if your modem has a built-in router
If your modem has Wi-Fi built in (a combined modem-router unit), the reset will have erased your Wi-Fi network name and password. You will need to reconnect your devices.
Look for a sticker on the modem itself—it usually shows a default network name (SSID) and password. On your phone, computer, or tablet, open your Wi-Fi settings and look for that network name in the list. Select it and enter the password from the sticker. Once you are connected, test your internet by opening a website or running a speed test.
If you want to change the network name and password to something you will remember, log into the modem's settings page. This is usually done by opening a web browser and typing 192.168.0.1 or 192.168.1.1 into the address bar, then entering the default username and password (also on the sticker). Your modem's manual or the manufacturer's website will have the exact address and login details if the sticker does not.
Contact your provider if the modem will not reconnect
If the lights do not settle into a stable pattern after 10 minutes, or if you see a red light instead of green, the modem is not connecting to your provider's network. This usually means the provider needs to re-register the modem on their system.
Call your internet provider's support line. Have the modem's serial number and MAC address ready—both are printed on a sticker on the back or bottom of the modem. The support team will re-register the device and walk you through any additional steps. This process usually takes 10 to 15 minutes on the phone.
Frequently Asked Questions
Will a reset erase my saved passwords or settings?
A reset erases the modem's connection to your internet provider and any Wi-Fi network settings. It does not affect passwords or settings on your personal devices—your phone, computer, or tablet will keep all their data. You will straightforward need to reconnect to your Wi-Fi network after the reset.
What is the difference between a reset and a restart?
A restart powers the modem off and back on but keeps all settings intact. A reset returns the modem to factory defaults and erases the provider's settings, so you have to reconnect. Always try a restart first; only reset if a restart does not fix the problem.
How long should I wait before using the internet after a reset?
Wait until the modem's lights settle into a steady pattern, which usually takes 2 to 5 minutes. If you try to use the internet before the lights are stable, the connection may drop or be very slow. Once the lights stop flashing and show a solid color, the modem is ready to use.
Can I reset my modem if it is not turning on?
No. If the modem has no power, check that the power cable is plugged in firmly at both the modem and the wall outlet. Try a different outlet to rule out a tripped breaker. If the modem still will not power on, contact your provider—the device may need replacement.
Do I need to reset my modem regularly?
No. A reset should only be done when you are troubleshooting a specific problem. A restart once every few months is fine for routine maintenance, but you should not reset your modem unless a restart has not fixed the issue or your provider's support team has asked you to try it.