The two ways to reset your Xfinity modem
A reset clears your modem's memory and restarts its connection to Comcast's network. There are two kinds: a soft reset (power cycle), which takes about five minutes and fixes most problems, and a hard reset, which erases all your settings and should only happen if the soft reset fails.
Start with the soft reset. It solves roughly 80 percent of modem problems—slow speeds, dropped connections, devices that won't connect—without losing anything. If that does not work, move to the hard reset.
Key Takeaways
- A soft reset means unplugging the modem for 30 seconds, then plugging it back in; it fixes most connection problems and takes five minutes.
- A hard reset erases all your settings and forces the modem to re-read them from Comcast, which takes 10 to 15 minutes and should only be done if a soft reset fails.
- After either reset, wait for the lights on the front of the modem to stop blinking before testing your connection.
- If your modem still will not connect after a hard reset, contact Comcast support, because the problem is likely on their network or the modem itself has failed.
How to do a soft reset (power cycle)
Unplug the power cable from the back of the modem. Wait 30 seconds—this drains the modem's memory and stops all its processes. Then plug the power cable back in.
Watch the lights on the front of the modem. You will see them blink in sequence: usually white or blue lights cycling through different patterns. This is normal. Wait until the lights stop blinking and settle into a steady state—usually a solid white or blue light on the top, and a solid light on the "Online" indicator. This takes about three to five minutes.
Once the lights are steady, test your connection. Open a web browser and load a website, or check whether your devices can connect to WiFi. If the problem is solved, you are done.
How to do a hard reset
A hard reset erases the modem's configuration and forces it to read fresh settings from Comcast. Only do this if a soft reset did not work.
Locate the small reset button on the back or bottom of the modem. It is usually recessed (sunken into the plastic) so you cannot press it by accident. Use a straightened paperclip or a ballpoint pen to press and hold the button for 10 to 15 seconds. You may hear a click or feel resistance—that is normal.
Release the button and watch the lights. The modem will restart and the lights will blink in sequence again. This time it will take longer—usually 10 to 15 minutes—because the modem is downloading its settings from Comcast's servers. Do not unplug it during this process.
Once the lights settle into a steady state, the modem is ready. You will need to set up your WiFi network again: the modem will have returned to its factory defaults, so your WiFi name and password are gone. Log into the modem's admin page (usually 192.168.0.1 in your browser) and create a new WiFi network, or look for a sticker on the modem that shows the default WiFi name and password.
What the lights mean while your modem resets
The lights on your modem tell you what is happening. During a reset, you will see them blink in different colors and patterns. This is the modem talking to Comcast's network and downloading its settings.
A solid light (not blinking) usually means that part of the connection is working. A blinking light means the modem is still working on that part. If a light stays off entirely, that part of the connection may have failed—for example, a modem with no "Online" light at all may not be connecting to the internet.
Wait for all lights to stop blinking before you assume the reset is complete. If the lights are still blinking after 20 minutes, unplug the modem, wait 30 seconds, and plug it back in to start over.
When to call Comcast instead of resetting
If a soft reset fixes the problem, you are done. If a soft reset does not work but a hard reset does, the issue was in your modem's configuration, and you have solved it.
If a hard reset does not fix the problem—meaning your connection is still slow, drops out, or will not come back at all—the issue is likely on Comcast's network or the modem itself has failed. Contact Comcast support. Have the modem's serial number ready (it is on a sticker on the modem) and tell them you have already done a hard reset. They can check whether there is an outage in your area, test the line from their end, or send a replacement modem if yours is defective.
What happens to your WiFi and devices after a reset
A soft reset does not erase anything. Your WiFi network name and password stay the same, and all your devices stay connected. You may see a brief interruption (a few seconds) while the modem reconnects, but then everything should work as before.
A hard reset erases everything. Your WiFi network is deleted, so all your devices will lose their connection. You will need to reconnect each device by entering the WiFi password again. If you set up a custom WiFi name and password, those are gone and you will need to create them again.
Before you do a hard reset, write down your WiFi name and password if you customized them. After the reset, you can set them back to the same values so you do not have to reconnect every device.
Frequently Asked Questions
How long should I wait before plugging the modem back in?
Wait at least 30 seconds. This gives the modem time to fully power down and clear its memory. Plugging it back in after just a few seconds may not solve the problem because the modem did not fully reset.
Will a reset delete my internet history or passwords?
A soft reset will not. A hard reset erases only the modem's settings—your WiFi name, password, and any custom configurations. It does not touch your devices, your browser history, or anything stored on your computer or phone.
What if the reset button is stuck or will not click?
Try using a different tool—a straightened paperclip usually works better than a pen. Press firmly and hold for the full 10 to 15 seconds. If the button truly will not move, the modem may be damaged and you should contact Comcast for a replacement.
Can I reset my modem while devices are connected to it?
Yes, but they will lose their connection during the reset. A soft reset usually reconnects them automatically within a minute or two. A hard reset will disconnect them permanently until you set up the WiFi network again and reconnect them manually.
What if my modem still will not work after a hard reset?
Contact Comcast support. The problem is either on their network (an outage or a line issue) or the modem itself has failed. They can test the line from their end and send a replacement modem if needed.