What Happens When You Reset a Netgear Modem

A factory reset erases all settings on your Netgear modem and returns it to the state it shipped in. This means your internet connection will stop working until you set it up again from the beginning. The modem will forget your Wi-Fi network name, password, and any custom settings you created. Use a reset only when your modem is not responding to normal troubleshooting, when you are transferring it to a new owner, or when your internet service provider instructs you to do so.

There are two ways to reset a Netgear modem: a soft reset (restart) that keeps your settings, and a hard reset (factory reset) that erases everything. Most connection problems are solved by a soft reset, which takes about two minutes. A hard reset should be your last step before calling your provider.

Key Takeaways

  • A soft reset (power cycle) fixes most modem problems and takes two minutes—unplug the modem for 30 seconds, then plug it back in.
  • A hard reset erases all settings and returns the modem to factory defaults, so use it only when soft reset does not work.
  • To perform a hard reset, hold the Reset button on the back of the modem for 10 to 15 seconds while it is powered on.
  • After a hard reset, you must set up your internet connection again by logging into the modem's admin page at 192.168.0.1 or 192.168.100.1.
  • Write down your internet service provider account number before resetting, because you will need it to reconnect.

Soft Reset: Power Cycling Your Modem

A soft reset, also called a power cycle, restarts the modem without erasing settings. This fixes temporary glitches like slow speeds, dropped connections, or pages that will not load. Perform a soft reset before attempting a hard reset.

Unplug the power cable from the back of the modem. Wait 30 seconds—this allows the modem's memory to clear. Plug the power cable back in. The modem will take 60 to 90 seconds to restart. You will see the lights on the front blink as it boots up. When the Internet light stops blinking and stays solid, the modem is ready. Test your connection by opening a web browser and visiting any website.

If your connection works after a soft reset, you are done. If the problem returns within a few hours or days, contact your internet service provider—the issue may be on their network, not your modem.

Hard Reset: Returning to Factory Settings

A hard reset erases your Wi-Fi password, network name, and any port forwarding or firewall rules you set up. Perform a hard reset only when a soft reset does not fix the problem, or when you are preparing the modem for someone else to use.

Locate the small Reset button on the back of the modem. It is usually recessed so you cannot press it by accident. You will need a straightened paperclip or a ballpoint pen to reach it. While the modem is powered on, press and hold the Reset button for 10 to 15 seconds. Do not release it early. The lights on the front will flash rapidly, then go dark. This signals that the reset is in progress. Release the button and wait 60 to 90 seconds for the modem to restart.

The modem will restart with all factory defaults restored. The Wi-Fi network will broadcast a default name (usually printed on a sticker on the modem), and there will be no password. Write down this default network name before you proceed.

Setting Up Your Modem After a Hard Reset

After a hard reset, your modem has no internet connection. You must log into the modem's admin page and enter your internet service provider account information again.

Open a web browser on a computer or phone connected to the modem's Wi-Fi network. Type 192.168.0.1 or 192.168.100.1 into the address bar and press Enter. (Different Netgear models use different addresses—try the first one first.) You will see a login page. The default username is admin and the default password is password. Click Log In.

You will see the modem's setup wizard. Follow the on-screen steps to enter your internet service provider account number and password. You can find this information on your internet bill or by logging into your provider's website. The modem will test the connection. Once it connects, you can create a new Wi-Fi network name and password. Write these down in a safe place.

The modem will restart with your new settings. The Internet light will turn solid green or blue within two minutes. Your internet connection is now active.

Changing Your Wi-Fi Password After Reset

After a hard reset, your Wi-Fi network uses the default password printed on the modem's label. Change this to something only you know. Log back into the admin page at 192.168.0.1 or 192.168.100.1 with username admin and password password.

Look for a section called Wi-Fi Settings, Wireless, or Network. You will see fields for Network Name (SSID) and Network Password (or Passphrase). Change the Network Name to something you recognize. Change the Network Password to a string of at least 12 characters that includes uppercase letters, lowercase letters, numbers, and symbols. Click Save or explore. The modem will restart, and your new Wi-Fi network will be live.

When to Contact Your Internet Service Provider

If the modem will not connect to the internet after a hard reset and setup, the problem may be with your account or the network outside your home. Before calling, verify that you entered your account number and password correctly by checking your internet bill or your provider's website.

Contact your internet service provider and tell them you have performed a factory reset. Provide your account number. They can check whether your modem is registered on their network and whether there are any outages in your area. They may also send a signal to your modem to re-register it. Keep your modem's model number (printed on the label) handy when you call.

Frequently Asked Questions

Will a soft reset delete my Wi-Fi password?

No. A soft reset only restarts the modem and keeps all your settings, including your Wi-Fi network name and password. Only a hard reset erases settings.

How do I know if my modem is a Netgear?

Look at the label on the front or back of the modem. It will say "Netgear" and list a model number starting with letters like MR, CM, or MB. If you do not see a label, check the paperwork that came with it or your internet bill.

What if I forgot my Wi-Fi password after a reset?

Log into the modem's admin page at 192.168.0.1 or 192.168.100.1 with username admin and password password. Go to Wi-Fi Settings and look at the Network Password field—it will show your current password. You can change it to something you will remember.

Can I reset my modem if it has no power light?

Check that the power cable is plugged into both the modem and the wall outlet. Try a different outlet. If the modem still has no light, it may not be receiving power. Contact your internet service provider or the modem manufacturer for help.

How long does a factory reset take?

The reset button press takes 10 to 15 seconds. The modem then takes 60 to 90 seconds to restart. Total time is about two to three minutes. Do not unplug the modem during this time.