A soft reset clears temporary problems without losing your account settings
A soft reset restarts your Quantum Fiber modem while keeping your account information and network settings intact. This fixes most connection problems—slow speeds, dropped connections, or devices that won't connect—in about five minutes. A soft reset is the first thing to try before calling support or doing a full factory reset that erases everything.
To perform a soft reset, locate the power button on the back or bottom of your modem. Press and hold it for three to five seconds until the lights turn off. Wait 30 seconds with the power off, then press the button again to turn it back on. The lights will flash as the modem restarts—this takes two to three minutes. When the internet light stops flashing and stays solid, your modem is ready to use.
Key Takeaways
- A soft reset takes two to three minutes and fixes most connection issues without erasing your settings.
- Press and hold the power button for three to five seconds, wait 30 seconds, then press it again to restart.
- A factory reset erases all settings and requires you to set up your modem again—only do this if a soft reset does not work.
- If problems return within a few hours, the issue is likely with your internet service, not the modem itself.
When to use a soft reset versus a factory reset
A soft reset is your first choice for any connection problem. It restarts the modem's processor and clears temporary memory without touching your saved settings. Most issues—lag when streaming, devices disconnecting, or slow speeds—clear up after a soft reset.
A factory reset erases all settings and returns the modem to its original state. Use this only if a soft reset does not work and you are willing to set up the modem from scratch. After a factory reset, you will need to contact Quantum Fiber or use their app to re-register the modem to your account before it connects to the internet again. This process can take 24 hours or longer.
How to perform a factory reset
Locate the small reset button on the back of the modem—it is usually recessed and requires a paperclip or pin to press. With the modem powered on, press and hold the reset button for 10 to 15 seconds until all the lights turn off. Release the button and wait for the modem to restart. The lights will flash for several minutes as it boots up.
Once the modem finishes restarting, it will not have internet access until you re-register it. Open the Quantum Fiber app or visit their website and follow the steps to add your modem back to your account. You will need your account number and the modem's MAC address, which is printed on a label on the device. Re-registration usually takes a few minutes, but internet service may not return for up to 24 hours.
What to check before you reset
Before resetting, make sure the problem is actually with the modem and not something else. Check that the cable from the wall outlet is firmly plugged into the modem's input port. Look at the lights on the front—if the internet light is off or red, the modem is not receiving a signal from your service provider, which a reset will not fix.
Restart any devices that are having trouble connecting—your phone, laptop, or streaming device—before you restart the modem. Sometimes a single device gets stuck and a soft reset of just that device solves the problem. If only one device is having trouble while others work fine, the issue is likely with that device, not the modem.
What the modem lights mean during and after a reset
When you first power off the modem, all lights go dark. As it powers back on, the lights will flash in sequence—this is normal and means the modem is starting up. The power light (usually white or green) comes on first, followed by the internet light and other status lights.
During startup, the internet light will flash amber or red. This is normal and can last one to three minutes. Once the internet light turns solid green or white, the modem has connected to your service and is ready to use. If the internet light stays red or off after five minutes, the modem is not receiving a signal—contact Quantum Fiber support to check your service.
Troubleshooting after a reset
If your connection is still slow or unstable after a soft reset, wait a few hours before trying again. Sometimes connection problems are temporary and clear up on their own. If the problem returns within a few hours of a successful reset, it usually means the issue is with your internet service, not the modem itself.
If devices still will not connect after a reset, forget the network on each device and reconnect. On phones and laptops, go to your network settings, find your Quantum Fiber network name, and select "Forget." Then reconnect by entering your Wi-Fi password again. This clears any old or corrupted connection data on the device.
When to contact Quantum Fiber support
Contact Quantum Fiber if the internet light stays red or off for more than five minutes after a reset, or if it keeps going out and coming back on repeatedly. These signs point to a service outage or a problem with your account that a reset cannot fix. Have your account number and the modem's MAC address ready when you call.
Also reach out to support if you performed a factory reset and the modem will not re-register to your account after 24 hours. This can happen if there is a problem with your account or if the modem itself is faulty. Support can check your account status and either help you complete the registration or arrange a replacement modem if needed.
Frequently Asked Questions
How long does a soft reset take?
A soft reset takes about five minutes total—30 seconds with the power off, then two to three minutes for the modem to restart and reconnect. You can use your internet again once the internet light turns solid green or white.
Will a soft reset delete my Wi-Fi password?
No. A soft reset keeps all your settings, including your Wi-Fi network name and password. Your devices will stay connected to the network without needing to re-enter the password.
What is the difference between the power button and the reset button?
The power button is large and straightforward to press—it turns the modem off and on. The reset button is small and recessed, requiring a paperclip to press. The power button does a soft reset; the reset button does a factory reset that erases all settings.
Can I unplug the modem instead of using the power button?
Yes, unplugging the modem works the same as pressing the power button. Wait 30 seconds before plugging it back in. However, using the power button is gentler on the equipment and is the recommended method.
Why does my modem keep disconnecting even after a reset?
Repeated disconnections after a reset usually point to a service issue, not a modem problem. Contact Quantum Fiber to check for outages in your area or problems with your account. In the meantime, make sure the cable from the wall is tight and the modem is in a cool, well-ventilated spot.