A reset clears your modem's memory and restarts its connection to your internet service provider

When your modem stops responding, won't connect to the internet, or runs slowly, a reset often fixes it without a technician visit. A reset wipes the modem's temporary memory and forces it to re-establish contact with your ISP's network from scratch. Most modems recover within two to five minutes after a reset, though the process itself takes less than a minute.

There are two types of reset: a soft reset (power cycle) and a hard reset (factory reset). A soft reset is what you should try first—it solves the majority of connection problems and does not erase any settings. A hard reset erases everything and should only be used if a soft reset fails or if you are returning the modem to your ISP.

Key Takeaways

  • A soft reset (unplugging the modem for 30 seconds) fixes most connection problems and takes just a few minutes.
  • Wait at least 30 seconds after unplugging before plugging back in—this gives the modem time to fully discharge.
  • After a reset, your modem needs two to five minutes to reconnect to your ISP and restore internet service.
  • A hard reset erases all settings and should only be used if a soft reset fails or you are preparing the modem for return.
  • If your modem still will not connect after a reset, contact your ISP to check whether there is an outage or account issue.

How to do a soft reset (power cycle)

Unplug the power cable from the back of the modem. Wait at least 30 seconds—this allows the modem's capacitors to fully discharge and clears its temporary memory. While you wait, you can also unplug your router if you have a separate one, though this is not required.

Plug the modem back in. The lights on the front will flash as it boots up. Wait two to five minutes for the modem to reconnect to your ISP. You will see a steady light (usually labeled "Online," "Internet," or "Link") once the connection is restored. Your internet should return to normal speed.

If you unplugged your router as well, plug it back in after the modem has fully restarted. The router will take another minute or two to come online.

How to do a hard reset (factory reset)

A hard reset erases all settings stored on the modem and returns it to factory defaults. Only do this if a soft reset did not work, or if you are preparing the modem to return to your ISP. After a hard reset, you will need to set up the modem again with your ISP account information.

Locate the small reset button on the back or bottom of the modem. It is usually recessed (sunken into the case) so it cannot be pressed by accident. Use a straightened paperclip or a ballpoint pen to press and hold the button for 10 to 15 seconds while the modem is powered on. The lights will flash and go dark as the modem erases its settings.

Release the button and wait for the modem to restart. This takes two to five minutes. Once the lights stabilize, the modem is back to factory settings. You will need to contact your ISP or use their app to reconfigure the modem with your account before you can use the internet again.

What to do if the modem still will not connect after a reset

If your internet does not return after waiting five minutes, check the cables. Make sure the coaxial cable (the thick cable from the wall) is hand-tight at both the wall outlet and the modem. A loose connection is one of the most common reasons a modem will not reconnect after a reset.

If the cables are find and the modem still shows no online light, contact your ISP. There may be an outage in your area, a problem with your account, or an issue with the line coming into your home. Your ISP can check their network on their end and tell you whether the problem is on your side or theirs.

Signs your modem needs a reset

Your modem may need a reset if your internet drops out and comes back on its own, if web pages load slowly even though your speed test shows normal speeds, or if you cannot connect to the internet at all but the modem is powered on. You might also notice that some devices connect fine while others cannot—this often means the modem's memory is full and needs clearing.

If your modem resets itself repeatedly (the lights go dark and restart on their own), this usually signals a hardware problem rather than a software one. In that case, contact your ISP about a replacement modem.

Soft reset versus hard reset: which one to use

Start with a soft reset every time. It solves about 80 percent of modem problems, takes only a few minutes, and does not erase any settings. You will not lose your WiFi password or any other configuration.

Use a hard reset only if a soft reset did not work, or if you are returning the modem to your ISP and want to erase your settings first. A hard reset is also the right choice if you are giving the modem to someone else and want to remove your account information.

What happens to your settings after a reset

A soft reset does not change any settings. Your WiFi network name, password, and any custom configurations remain exactly as they were. The modem straightforward clears its temporary memory and reconnects to your ISP.

A hard reset erases everything. Your WiFi network name and password will revert to the factory defaults (usually printed on a sticker on the modem). Any port forwarding, DNS settings, or other custom configurations will be lost. You will need to set these up again after the modem reconnects to your ISP.

Frequently Asked Questions

How long should I wait before plugging the modem back in?

Wait at least 30 seconds. This gives the modem's internal capacitors time to fully discharge and clears the temporary memory. If you plug it back in too quickly, the reset may not work properly.

Will a reset fix my slow internet?

A reset can help if your modem's memory is full or if it has lost sync with your ISP. However, if your speed test shows you are getting the speeds you pay for, slow loading is usually a WiFi signal issue or a problem with the website itself, not the modem.

Do I need to reset my router too?

No. Your modem and router are separate devices. Resetting the modem will not affect your router. You can reset your router separately if it is having problems, but most of the time resetting just the modem is enough.

What if I do not know which cable is the power cable?

The power cable is the one that goes to a wall outlet or power strip. It is usually a thick black or white cord. The other cables (coaxial from the wall, ethernet to devices) stay plugged in during a reset.

Can I reset my modem while I am using the internet?

You can, but your internet will go down when ready. It is best to reset when you are not in the middle of something important. The whole process takes only a few minutes, so pick a time when you can afford to be offline briefly.