The fastest way to restart your Arris modem

Restarting your Arris modem takes about two minutes and fixes most connection problems without calling your internet provider. You have two options: a soft restart (power off and back on) or a hard restart (factory reset). A soft restart solves temporary slowness or dropped connections. A hard restart erases all your settings and should only be used if your modem is not responding at all.

For most situations, start with the soft restart. If that does not work, move to the hard restart. Both methods are safe and will not damage your modem.

Key Takeaways

  • A soft restart means unplugging the power cable for 30 seconds, then plugging it back in — this fixes most connection issues.
  • Wait three to five minutes after restarting before testing your internet, because the modem needs time to reconnect to your provider.
  • A hard restart erases your modem settings and should only be used if the soft restart does not work or the modem is completely unresponsive.
  • The reset button on an Arris modem is recessed and requires a paperclip or pin to press — holding it for 10 seconds triggers a factory reset.

How to do a soft restart (power cycle)

Unplug the power cable from the back of your Arris modem. The cable connects to a port labeled "Power" or "AC In." Do not unplug the ethernet cables or coaxial cable — only the power cord.

Wait 30 seconds. This pause lets the modem's internal memory clear. You do not need to wait longer, but waiting a full minute does not hurt.

Plug the power cable back in. The modem will boot up, and you will see lights on the front panel turn on and cycle through colors. The lights usually go through white, amber, and green as the modem reconnects.

Wait three to five minutes before testing your internet. During this time, the modem is talking to your internet provider's network and downloading its settings. If you test too soon, you may think the restart failed when the modem is still connecting.

How to do a hard restart (factory reset)

A hard restart erases all settings on your modem and returns it to factory defaults. Use this only if the soft restart did not fix your problem or if your modem is completely unresponsive (no lights, no connection).

Locate the reset button on the back of your Arris modem. It is a small, recessed button usually labeled "Reset" or "Restart." You cannot press it with your finger — you need a paperclip, straightened paper clip, or ballpoint pen.

With the modem powered on, insert the paperclip into the reset button hole and press firmly for 10 seconds. Hold it steady — do not wiggle or release early. After 10 seconds, remove the paperclip. The modem will restart and all lights will turn off, then cycle back on.

Wait five to ten minutes for the modem to fully restart and reconnect to your provider. This takes longer than a soft restart because the modem is reconfiguring itself from scratch.

What to do if the modem still does not work

If your internet connection does not return after a soft restart, try the hard restart. If the hard restart does not work, check the physical connections: make sure the coaxial cable (the thick cable from the wall) is hand-tight at both ends, and that the power cable is fully inserted.

If the modem still has no lights and does not respond to either restart method, the modem itself may be faulty. Contact your internet provider — they can send a replacement or troubleshoot further over the phone. Have your account number and the modem's serial number (printed on the label) ready when you call.

Why your modem needs restarting

Modems are small computers that manage your internet connection. Over time, they accumulate temporary data in memory that can slow them down or cause them to drop the connection. A restart clears this data and forces the modem to reconnect to your provider's network fresh.

Common reasons to restart include slow speeds, pages that load slowly, video calls that freeze, or devices that cannot connect to wifi. A restart fixes these problems about 70 percent of the time because the issue is usually temporary memory buildup, not a hardware failure.

How to tell when the restart is complete

After you restart, watch the lights on the front of your modem. Most Arris modems have lights for power, internet, and wifi. When the restart is done, the internet light (usually labeled "Online" or "Internet") will be solid green or white, not blinking. The wifi light will also be solid if your modem has built-in wifi.

Once both lights are solid, your modem is ready. Open a web browser and load a website to confirm the connection is working. If the lights are still blinking or red, wait another minute or two — the modem may still be connecting.

Frequently Asked Questions

Can I restart my modem while I am using the internet?

You can, but you will lose your connection when ready when you unplug it. It is better to finish what you are doing first, then restart. If you are in the middle of a video call or read, wait until it is finished.

Will restarting erase my wifi password?

A soft restart will not erase your wifi password. A hard restart (factory reset) will erase it and return the wifi to the default password printed on the modem's label. You can then change it back in your modem's settings.

How often should I restart my modem?

You do not need to restart on a schedule. Restart only when you notice connection problems. If you have to restart more than once a week, contact your internet provider — it may indicate a problem with your service or the modem itself.

What is the difference between restarting and resetting?

Restarting (soft restart) means turning it off and back on — your settings stay the same. Resetting (hard restart) means pressing the reset button and erasing all settings back to factory defaults. Always try a soft restart first.

Do I need to unplug other cables when I restart?

No. Unplug only the power cable. Leave the coaxial cable from the wall and any ethernet cables plugged in. Unplugging those cables is not necessary and may cause the modem to take longer to reconnect.