The three ways to restart your Xfinity modem

You can restart your Xfinity modem by pressing the reset button on the back, unplugging it for 30 seconds, or using the Xfinity app on your phone. The reset button is the fastest method if you can reach the back of your modem. Unplugging works just as well and gives you time to check cable connections while it sits. The app method takes longer but requires no physical access to the device.

A restart clears your modem's memory and forces it to reconnect to Xfinity's network. This fixes most connection problems — slow speeds, dropped WiFi, pages that won't load — without erasing your account information or requiring a technician visit. The modem will take two to five minutes to fully restart and reconnect after you begin.

Key Takeaways

  • Press and hold the reset button on the back of your modem for 10 to 15 seconds to restart it using the physical button.
  • Unplug the modem's power cable, wait 30 seconds, then plug it back in — this is equally effective and lets you check connections at the same time.
  • Open the Xfinity app, go to the Internet section, find your modem, and select the restart option if you cannot reach the back of the device.
  • After restarting, wait two to five minutes for the modem to reconnect before testing your internet connection.
  • A restart does not erase your account settings or passwords — it only clears temporary memory and forces reconnection to the network.

Using the reset button on the back of your modem

Locate the small reset button on the back panel of your Xfinity modem. It is usually recessed slightly into the plastic so you cannot press it by accident. You will need a straightened paperclip, a ballpoint pen, or a similar thin object to reach it.

Press and hold the reset button for 10 to 15 seconds. You should see the lights on the front of the modem turn off, then begin blinking as the modem restarts. Release the button once the lights start their restart sequence. Do not hold it longer than 15 seconds — a very long press (30 seconds or more) will erase your modem settings and require you to set up your account again.

Wait two to five minutes for the modem to fully restart. The lights will cycle through different patterns. When the internet light (usually labeled "Online" or shown as a globe icon) turns solid green or blue, your modem has reconnected and is ready to use.

Unplugging your modem to restart it

Unplug the power cable from the back of your modem. This is the thick black cable that connects to a wall outlet or power strip. Wait a full 30 seconds before plugging it back in — this gives the modem time to fully discharge and clear its memory.

While the modem is unplugged, take 30 seconds to check that all cables are pushed firmly into their ports. The coaxial cable (thick cable from the wall) should be hand-tight. The ethernet cable (if you use one) should click into place. Loose cables are a common reason modems lose connection, so this is a good time to reseat them.

Plug the power cable back in. The modem will begin its startup sequence when ready. Lights will blink in a pattern as it reconnects to the network. Wait two to five minutes for the internet light to turn solid, then test your connection by opening a web page or streaming a video.

Restarting your modem through the Xfinity app

Open the Xfinity app on your phone or tablet. Tap the menu icon (three horizontal lines) at the bottom of the screen. Select "Internet" from the menu options.

Find your modem listed under "Devices" or "My Equipment." Tap on it to open the modem details page. Look for a "Restart" button or option — it may be labeled "Restart Modem" or "Reboot." Tap it and confirm when the app asks you to verify.

The app will show a countdown or status message while your modem restarts. This method takes slightly longer than the physical button or unplugging because the command has to travel to Xfinity's servers and back to your modem. Wait for the app to confirm the restart is complete before closing it. Your modem will still take two to five minutes to fully reconnect after the app shows it has restarted.

What to do if your modem does not restart properly

If the lights do not turn off when you press the reset button or unplug the modem, check that the power cable is firmly connected to both the modem and the wall outlet. Try a different outlet to rule out a problem with the power strip or wall socket. If the modem still does not respond, the power supply may have failed and the modem may need to be replaced.

If the modem restarts but the internet light does not turn solid after five minutes, check that the coaxial cable from the wall is hand-tight at both ends. A loose cable is the most common reason a modem cannot reconnect. If the cable is tight and the light still does not turn solid after 10 minutes, contact Xfinity support — there may be an outage in your area or a problem with your account.

If you used the app to restart and it shows an error message, make sure you are connected to your modem's WiFi network. The app cannot send a restart command if your phone is on a different network. Switch to your Xfinity WiFi and try again.

When to restart versus when to contact support

Restart your modem first if you have slow speeds, dropped connections, or pages that load slowly. These problems are usually temporary and a restart fixes them in most cases. Also restart if your WiFi keeps disconnecting or if you cannot connect to the internet at all.

Contact Xfinity support instead if restarting does not fix the problem after two attempts, if the modem will not restart at all, or if the internet light stays red or off for more than 10 minutes after restart. Support can check for outages in your area, verify your account status, and determine whether your modem needs to be replaced. Have your account number and the modem's serial number (printed on the back) ready when you call.

Frequently Asked Questions

Will restarting my modem erase my WiFi password or account settings?

No. A restart only clears temporary memory and forces the modem to reconnect to Xfinity's network. Your WiFi password, account information, and all settings remain unchanged. You will not have to log in again or reconfigure anything after the restart is complete.

How long should I wait after restarting before I use the internet?

Wait two to five minutes for the modem to fully reconnect. The internet light should turn solid green or blue before you try to use the internet. If you try to connect before the light is solid, your devices may not find the network or may connect and then drop when ready.

Can I restart my modem while I am using the internet?

Yes, but your internet will go down when ready when you restart. Any downloads, video calls, or online games will be interrupted. It is best to restart when you are not actively using the internet, or let anyone else in your home know that the connection will drop for a few minutes.

What is the difference between a restart and a factory reset?

A restart clears temporary memory and reconnects to the network — your settings stay the same. A factory reset erases all settings and returns the modem to its original state, requiring you to set up your account again. A short press of the reset button (10 to 15 seconds) restarts. A very long press (30 seconds or more) factory resets. Only do a factory reset if support specifically tells you to.

Do I need to restart my modem regularly?

No, you do not need to restart on a schedule. Restart only when you have a connection problem. Some people restart once a month as preventive maintenance, but it is not required. If you find yourself restarting more than once a week, contact support — frequent disconnections usually mean a bigger problem that needs professional attention.