Restart your modem by unplugging it, waiting 30 seconds, and plugging it back in
A modem restart clears its memory and forces it to reconnect to your internet service provider. This fixes most connection problems — slow speeds, dropped WiFi, devices that won't connect — without you having to call your provider or change any settings. The process takes about two minutes total.
The restart is different from a reset. A restart keeps all your settings and login information intact. A reset erases everything and returns the modem to factory defaults, which you should only do if a restart doesn't work or if you're troubleshooting a specific problem a technician has told you to try.
Key Takeaways
- Unplug the modem from power, wait 30 seconds, then plug it back in — this is a full restart and fixes most WiFi problems.
- Wait two to three minutes after plugging it back in for the lights to stabilize before testing your connection.
- A restart keeps your password and network name; a factory reset erases everything and should only be done if restart doesn't work.
- If the modem still won't connect after a restart, check that the cable from the wall is firmly seated in the port labeled "In" or "Line".
Step 1: Locate the power cable and unplug it
Find where the modem's power cable connects to the back or bottom of the unit. Pull the plug straight out of the modem — do not just turn off a power strip or surge protector, because the modem may stay partially powered. You need a complete power loss.
If your modem is mounted on a wall or in a cabinet, make sure you have clear access to the plug before you start. Some setups have the power cable routed through cable management, so trace it first.
Step 2: Wait 30 seconds with the power off
Leave the modem unplugged for a full 30 seconds. This gives the modem time to discharge completely and clear its memory. Waiting less than 30 seconds often doesn't work because the modem's capacitors still hold a charge.
While you wait, you can check that the cable coming from the wall (the one labeled "In," "Line," or "Internet") is plugged firmly into the modem. A loose cable is a common reason restarts don't fix the problem. Push it in until you hear or feel a click.
Step 3: Plug the modem back in and wait for lights to stabilize
Plug the power cable back into the modem. You'll see the lights on the front start to flash. Different modems have different light patterns, but most show a power light, an internet light, and a WiFi light. Wait two to three minutes for these lights to stop flashing and settle into a steady state.
Once the lights are stable — usually a solid green or white color — your modem has reconnected to your provider and your WiFi is ready to use. Test your connection by opening a web browser or checking that your devices can see the WiFi network.
What the lights mean while the modem restarts
During the restart, the power light comes on first. Then the internet light (sometimes labeled "Online" or "Internet") will flash while the modem talks to your provider's network. Finally, the WiFi light will come on. If any light stays red or doesn't come on after three minutes, the modem may have a hardware problem or the cable from the wall may be disconnected.
If the internet light never comes on, unplug the modem again and check that the cable from the wall is pushed all the way into the port. The connection needs to be very firm. If it's already tight and the light still won't come on after a second restart, the problem may be with your provider's service in your area — you can check your provider's website or call them to see if there's an outage.
When to restart versus when to call your provider
Restart your modem first for any of these problems: slow WiFi, devices dropping off the network, one device won't connect, or the internet cuts out and comes back. A restart fixes most of these without any other action.
Call your provider if the modem won't reconnect after a restart, if the internet light stays red or off, or if you have no internet at all and the cable from the wall is plugged in firmly. Your provider can check whether there's an outage, whether your account is active, or whether the modem itself has failed. They may also be able to restart the modem remotely from their end, which sometimes works when a manual restart doesn't.
The difference between restart and factory reset
A restart (unplug, wait, plug back in) keeps your WiFi password, network name, and any other settings you've changed. You won't have to log back in or reconfigure anything.
A factory reset erases all settings and returns the modem to how it came from the manufacturer. You would then have to log in with a default username and password, set up your WiFi network name and password again, and reconfigure any other settings. Only do a factory reset if a technician tells you to, or if a restart doesn't fix the problem and you want to try one more thing before calling for help. To factory reset, hold down the small reset button on the back of the modem for 10 to 15 seconds while it's powered on — but check your modem's manual first, because the button location and hold time vary by model.
Frequently Asked Questions
How long should I wait before testing my internet after restarting?
Wait two to three minutes for the lights to stop flashing and settle into a steady state. Testing too soon may show a false failure because the modem is still connecting. Once the internet light is solid, your connection is ready.
Do I need to restart my modem regularly?
No, a healthy modem doesn't need regular restarts. Restart it only when you notice a problem — slow speeds, dropped connections, or devices that won't connect. If you're restarting more than once a month, the modem may be failing and you should contact your provider.
Will restarting erase my WiFi password?
No. A restart keeps your WiFi password, network name, and all other settings. Your devices will stay connected to the same network with the same password. A factory reset would erase the password, but a straightforward restart does not.
What if the modem still doesn't work after I restart it?
Check that the cable from the wall is pushed firmly into the port labeled "In" or "Line." If it's already tight and the internet light still won't come on, restart the modem one more time. If it still doesn't work, contact your provider — the problem may be an outage, an account issue, or a modem that has failed.
Can I restart the modem while someone is using the internet?
You can, but everyone using the internet will lose their connection for two to three minutes while the modem restarts. It's best to restart when nobody is actively using the internet, or let people know first so they're not surprised by the interruption.