Connect the modem to power and your internet line

Start by placing your Arris modem in a central location in your home — away from metal objects, microwaves, and thick walls that block the signal. Plug the power cable into the modem and into a wall outlet. Wait 2 to 3 minutes for the lights on the front to stop blinking rapidly; when they settle into a steady pattern, the modem has powered up.

Next, take the coaxial cable (the thick cable with a threaded connector) that comes from your wall outlet or cable box and screw it firmly into the port labeled "Cable In" on the back of the modem. Hand-tighten it — do not use pliers, which can crack the connector. If you do not see a cable outlet in your wall, contact your internet service provider to have one installed.

Key Takeaways

  • The modem needs 2 to 3 minutes to fully power up after you plug it in; the front lights will stop blinking when it is ready.
  • Connect the coaxial cable from your wall outlet to the "Cable In" port on the back of the modem by hand-tightening the connector.
  • Use an ethernet cable to connect the modem directly to your router, or use the built-in WiFi if your Arris model has it.
  • Log into the modem's settings page using the default username and password printed on the modem's label, then change the password when ready.

Connect the modem to your router or computer

Take an ethernet cable and plug one end into the port labeled "Ethernet" or "LAN" on the back of the modem. Plug the other end into the internet port on your router (usually labeled "WAN" or "Internet"). This wired connection is the most stable way to get internet to your router, which then broadcasts WiFi throughout your home.

If you have an Arris SB or MB model with built-in WiFi, you can skip the router and connect devices directly to the modem's wireless network. However, a separate router gives you better range and more control over your network. Either way, wait another 2 to 3 minutes for the modem to establish a connection to your internet service provider — you will see the "Online" or "Internet" light turn solid green or white.

Log in to the modem's settings page

Open a web browser on a computer or phone connected to the modem and type 192.168.0.1 or 192.168.100.1 into the address bar. Press Enter. You will see a login screen asking for a username and password.

Look at the label on the bottom or back of your modem — it will show the default username (usually "admin" or "motorola") and a default password. Enter these credentials and click Log In. Once you are inside, you will see the modem's dashboard, which shows your connection status, signal strength, and other technical details. Do not change any settings yet unless you know what you are doing; most modems work correctly with their default configuration.

Change your modem's WiFi password if it has built-in WiFi

If your Arris modem has WiFi, the default network name and password are printed on the label. These are weak and shared across many modems, so you should change them. In the settings page you just logged into, look for a section called "WiFi" or "Wireless" — the exact name varies by model.

Click into that section and change the network name (SSID) to something you recognize and the password to something strong and unique. Write down the new password somewhere safe. Save your changes and wait 30 seconds for the modem to restart. Your devices will lose connection briefly, then you can reconnect using the new password.

Restart the modem if you are not getting internet

If the "Online" light does not turn solid green within 5 minutes, or if you can see the modem's network but cannot reach the internet, restart it. Unplug the power cable from the back of the modem, wait 30 seconds, and plug it back in. This clears the modem's memory and forces it to re-establish a connection with your internet service provider.

If the light still does not turn green after a full restart, check that the coaxial cable is screwed in tightly and that no visible damage is on the cable itself. If everything looks correct and the modem still will not connect, contact your internet service provider — the problem may be on their end, or your modem may need to be registered to your account.

Register your modem with your internet service provider

Some internet service providers require you to register your modem before it will work. Check your provider's website or call their customer service number to find out. If registration is required, you will need the modem's MAC address, which is printed on the label on the back of the modem and also appears in the settings page under "System Information" or "Device Information."

Registration usually takes 15 minutes to an hour. Once it is complete, the modem will connect to the internet automatically. If you are unsure whether your provider requires registration, call them — it is a quick question and saves you troubleshooting time later.

Position the modem for the best signal

The location of your modem affects how well it works. Place it in a central, elevated spot — on a shelf or wall mount rather than on the floor or inside a cabinet. Keep it away from metal objects, cordless phones, baby monitors, and microwave ovens, all of which can interfere with the signal. Avoid placing it in a corner or against an outside wall if possible.

If you have a large home or thick walls, the modem's signal may not reach every room. In that case, a WiFi extender or mesh network system can help. However, the modem itself should stay in one place — moving it around will cause your connection to drop and reconnect repeatedly.

Frequently Asked Questions

What do the lights on the front of the modem mean?

The "Power" light shows the modem is on. The "Online" or "Internet" light turns solid green when the modem is connected to your service provider. The "Downstream" and "Upstream" lights blink when data is moving. If the Online light is off or red, the modem is not connected — check the coaxial cable and restart the modem.

Can I use any ethernet cable to connect the modem to my router?

Yes. Any standard ethernet cable works. Cat5e, Cat6, and Cat7 cables all work with modems. The length does not matter as long as it reaches from the modem to your router. Shorter cables are neater, but a 50-foot cable works just as well.

Do I need to restart the modem after changing the WiFi password?

Yes. After you save the new password in the settings page, the modem will restart automatically within 30 seconds. Your devices will disconnect and you will need to reconnect using the new password. This is normal and expected.

What if I forgot the default password printed on the modem?

You can reset the modem to factory defaults by holding down the small reset button on the back for 10 to 15 seconds while the modem is powered on. This erases all your changes and restores the default username and password. You will have to set everything up again, so only do this if you have no other way to log in.

Is it safe to leave the modem on all the time?

Yes. Modems are designed to run 24/7 and draw very little power. Turning it off and on repeatedly can actually shorten its lifespan. The only reason to power it down is if you are troubleshooting a connection problem or leaving home for an extended period.